Orange Pi One

multiple revisions of this device, use caution

Open-source Single-board Computer
Homepage	Product page
3rd Party Firmware
dd-wrt	Incompatible
OpenWrt	Supported
Tomato any flavor	Incompatible
Gargoyle	Incompatible
Platform
Brand • Model • Rev	Orange Pi OPI One
Type	single-board computer
CPU1	Allwinner H3
CPU1 Type	ARM Cortex-A7
CPU1 Speed	1.3 GHz ( 4 cores )
Flash1 Chip	Brand? Model?
Flash1 Size	2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br />
RAM1 Size	512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br />
RAM1 Chip	Samsung K4B2G1646F-BYNA x 2
ETH chip1	Allwinner H3
Ethernet Port Count	1-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
Stock bootloader	U-Boot
Stock FW OS	Linux
Expansion IF types	USB 2.0, MicroSD Card slot
USB ports	1
SD/MMC Slots	1
USB Hub Compatible	Untested
Power	5 VDC, 2 A
Connector type	barrel 4.0 mm (OD) 1.7 mm (ID)
Serial Port (UART)	yes, 3-pin header, (115200 8N1)
Flags: HDMI out, camera in, GPIO
Other
Default login user: root Default login password: orangepi root:orangepi credentials used by 11 additional devices of which 11 are Orange Pi devices
Manuf/OEM/ODM	Shenzhen Xunlong
3rd Party Firmware Support	OpenWrt • (List | Dev | DLs)
Retail
(Est.) release date	January 2016
(Est.) initial retail price (in USD):	$10
ASIN	B01CXE2SMS
Country of manuf	China
CPU1 brand FLA1 RAM1 Orange Pi One Allwinner 2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> 512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> Orange Pi One Plus Allwinner 0 MiB0 B <br />0 Kib <br />0 KiB <br />0 Mib <br />0 GiB <br /> 1,024 MiB1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br />1 GiB <br />

For a list of all currently documented Allwinner SoC's with specifications, see Allwinner.

For a list of all currently documented Orange Pi device with specifications, see Orange Pi.

Flashing

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)
OpenWrt Target: sunxi
OpenWrt Subtarget: cortexa7
OpenWrt Package architecture: arm_cortex-a7_neon-vfpv4
Support started version: 19.07.0
Current supported version: 23.05.5

Please insert instructions here

JTAG-Serial Info

Boot log (Armbian)

bootlog • >>

U-Boot SPL 2017.01-armbian (Feb 02 2017 - 02:59:11) DRAM: 512 MiB Trying to boot from MMC1 U-Boot 2017.01-armbian (Feb 02 2017 - 02:59:11 +0100) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: Xunlong Orange Pi One DRAM: 512 MiB MMC: SUNXI SD/MMC: 0 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: phy interface0 eth0: ethernet@1c30000 Hit any key to stop autoboot: 0 6944 bytes read in 182 ms (37.1 KiB/s) switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 2652 bytes read in 223 ms (10.7 KiB/s) ## Executing script at 43100000 U-boot loaded from SD Boot script loaded from mmc 123 bytes read in 155 ms (0 Bytes/s) 3813144 bytes read in 568 ms (6.4 MiB/s) 4754648 bytes read in 652 ms (7 MiB/s) ** File not found /boot/.next ** ** File not found .next ** 34704 bytes read in 558 ms (60.5 KiB/s) ## Loading init Ramdisk from Legacy Image at 43300000 ... Image Name: uInitrd Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 3813080 Bytes = 3.6 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Using machid 0x1029 from environment Starting kernel ... [sun8i_fixup]: From boot, get meminfo: Start: 0x40000000 Size: 512MB ion_carveout reserve: 160m@0 256m@0 130m@1 200m@1 ion_reserve_select: ion chipid [0x2c00081! ion_reserve_common: ion reserve: [0x56000000, 0x60000000]! [ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.4.113-sun8i (root@devel) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.4) ) #10 SMP PREEMPT Thu Feb 23 19:55:00 CET 2017 [ 0.000000] cma: CMA: reserved 160 MiB at 56000000 [ 0.000000] PERCPU: Embedded 8 pages/cpu @c0f5c000 s11968 r8192 d12608 u32768 [ 0.000000] Kernel command line: root=UUID=d9ddeb3b-5fca-46d8-857a-96eb4cb8ffbc rootwait rootfstype=ext4 console=tty1 console=ttyS0,115200 cgroup_enable=memory swapaccount=1 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 panic=10 consoleblank=0 enforcing=0 loglevel=7 ubootpart=9781060c-01 ubootsource=mmc sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_fb_mem_reserve=16 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] allocated 1048576 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 512MB = 512MB total [ 0.000000] Memory: 338864k/338864k available, 185424k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc08d0a9c (8995 kB) [ 0.000000] .init : 0xc08d1000 - 0xc0924ec0 ( 336 kB) [ 0.000000] .data : 0xc0926000 - 0xc0995d30 ( 448 kB) [ 0.000000] .bss : 0xc09964e4 - 0xc0ac97c8 (1229 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] NR_IRQS:544 [ 0.000000] Architected local timer running at 24.00MHz. [ 0.000000] Switching to timer-based delay loop [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [tty1] enabled [ 0.001073] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000) [ 0.001141] pid_max: default: 32768 minimum: 301 [ 0.001324] Security Framework initialized [ 0.001366] AppArmor: AppArmor disabled by boot time parameter [ 0.001577] Mount-cache hash table entries: 512 [ 0.002590] Initializing cgroup subsys cpuacct [ 0.002629] Initializing cgroup subsys memory [ 0.002695] Initializing cgroup subsys devices [ 0.002726] Initializing cgroup subsys freezer [ 0.002755] Initializing cgroup subsys blkio [ 0.002796] Initializing cgroup subsys perf_event [ 0.002897] CPU: Testing write buffer coherency: ok [ 0.002970] ftrace: allocating 24851 entries in 73 pages [ 0.030315] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.030359] [sunxi_smp_prepare_cpus] enter [ 0.030407] Setting up static identity map for 0x4061fbf8 - 0x4061fc50 [ 0.031398] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.031530] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.040503] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.040624] Brought up 4 CPUs [ 0.040624] SMP: Total of 4 processors activated (19200.00 BogoMIPS). [ 0.041009] devtmpfs: initialized [ 0.052239] wakeup src cnt is : 2. [ 0.052330] sunxi pm init [ 0.052487] pinctrl core: initialized pinctrl subsystem [ 0.058987] NET: Registered protocol family 16 [ 0.061462] DMA: preallocated 2048 KiB pool for atomic coherent allocations [ 0.061575] script_sysfs_init success [ 0.062526] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl [ 0.063728] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver [ 0.064825] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.064864] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.065067] script config pll_video to 297 Mhz [ 0.065096] script config pll_de to 864 Mhz [ 0.065140] script config pll_ve to 402 Mhz [ 0.070240] bio: create slab <bio-0> at 0 [ 0.070339] [ARISC] :sunxi-arisc driver v1.04 [ 0.089076] [ARISC] :arisc version: [v0.1.58] [ 0.176320] [ARISC] :sunxi-arisc driver v1.04 startup succeeded [ 0.177966] SCSI subsystem initialized [ 0.177966] usbcore: registered new interface driver usbfs [ 0.177966] usbcore: registered new interface driver hub [ 0.180046] usbcore: registered new device driver usb [ 0.180176] twi_chan_cfg()340 - [twi0] has no twi_regulator. [ 0.180204] twi_chan_cfg()340 - [twi1] has no twi_regulator. [ 0.180230] twi_chan_cfg()340 - [twi2] has no twi_regulator. [ 0.180230] Linux video capture interface: v2.00 [ 0.180294] Advanced Linux Sound Architecture Driver Version 1.0.25. [ 0.181083] cfg80211: Calling CRDA to update world regulatory domain [ 0.181161] NetLabel: Initializing [ 0.181161] NetLabel: domain hash size = 128 [ 0.181161] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.181161] NetLabel: unlabeled traffic allowed by default [ 0.181161] Switching to clocksource arch_sys_counter [ 0.193561] FS-Cache: Loaded [ 0.193885] CacheFiles: Loaded [ 0.205420] NET: Registered protocol family 2 [ 0.216662] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.217259] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.217531] TCP bind hash table entries: 16384 (order: 5, 196608 bytes) [ 0.217821] TCP: Hash tables configured (established 16384 bind 16384) [ 0.217848] TCP: reno registered [ 0.217870] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.217910] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.218257] NET: Registered protocol family 1 [ 0.218705] RPC: Registered named UNIX socket transport module. [ 0.218737] RPC: Registered udp transport module. [ 0.218758] RPC: Registered tcp transport module. [ 0.218779] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.219006] Trying to unpack rootfs image as initramfs... [ 0.459368] Freeing initrd memory: 3720K [ 0.460112] hw perfevents: enabled with ARMv7 Cortex_A7 PMU driver, 5 counters available [ 0.460271] sunxi_reg_init enter [ 0.461231] audit: initializing netlink socket (disabled) [ 0.461307] type=2000 audit(0.460:1): initialized [ 0.463300] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.463729] NFS: Registering the id_resolver key type [ 0.464145] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.464179] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.464958] NTFS driver 2.1.30 [Flags: R/W]. [ 0.465305] fuse init (API version 7.18) [ 0.465744] msgmni has been set to 989 [ 0.467253] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.467298] io scheduler noop registered [ 0.467318] io scheduler deadline registered [ 0.467392] io scheduler cfq registered (default) [ 0.467816] [DISP]disp_module_init [ 0.468140] cmdline,init_disp= [ 0.468187] cmdline,disp= [ 0.476002] [DISP] Fb_map_kernel_logo,line:932:Fb_map_kernel_logo failed! [ 0.492447] Console: switching to colour frame buffer device 160x45 [ 0.510103] [DISP]disp_module_init finish [ 0.510480] sw_uart_get_devinfo()1503 - uart0 has no uart_regulator. [ 0.510987] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI [ 0.511177] sw_uart_pm()890 - uart0 clk is already enable [ 0.511348] sw_console_setup()1233 - console setup baud 115200 parity n bits 8, flow n [ 0.622909] console [ttyS0] enabled [ 1.134752] brd: module loaded [ 1.138743] loop: module loaded [ 1.258576] sunxi_spi_chan_cfg()1376 - [spi-0] has no spi_regulator. [ 1.258589] sunxi_spi_chan_cfg()1376 - [spi-1] has no spi_regulator. [ 1.259214] spi spi0: master is unqueued, this is deprecated [ 1.259543] tun: Universal TUN/TAP device driver, 1.6 [ 1.259551] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 1.260556] PPP generic driver version 2.4.2 [ 1.260772] PPP BSD Compression module registered [ 1.260782] PPP Deflate Compression module registered [ 1.263507] PPP MPPE Compression module registered [ 1.263521] NET: Registered protocol family 24 [ 1.263594] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.283692] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.283727] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1 [ 1.427742] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000 [ 1.610035] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00 [ 1.787412] hub 1-0:1.0: USB hub found [ 1.952190] hub 1-0:1.0: 1 port detected [ 2.060255] sunxi-ehci sunxi-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.074362] sunxi-ehci sunxi-ehci.2: new USB bus registered, assigned bus number 2 [ 2.088471] sunxi-ehci sunxi-ehci.2: irq 106, io mem 0xf1c1b000 [ 2.120034] sunxi-ehci sunxi-ehci.2: USB 0.0 started, EHCI 1.00 [ 2.132308] hub 2-0:1.0: USB hub found [ 2.141540] hub 2-0:1.0: 1 port detected [ 2.171229] sunxi-ehci sunxi-ehci.3: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.185242] sunxi-ehci sunxi-ehci.3: new USB bus registered, assigned bus number 3 [ 2.199232] sunxi-ehci sunxi-ehci.3: irq 108, io mem 0xf1c1c000 [ 2.230038] sunxi-ehci sunxi-ehci.3: USB 0.0 started, EHCI 1.00 [ 2.242187] hub 3-0:1.0: USB hub found [ 2.251373] hub 3-0:1.0: 1 port detected [ 2.280998] sunxi-ehci sunxi-ehci.4: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.295009] sunxi-ehci sunxi-ehci.4: new USB bus registered, assigned bus number 4 [ 2.309063] sunxi-ehci sunxi-ehci.4: irq 110, io mem 0xf1c1d000 [ 2.340038] sunxi-ehci sunxi-ehci.4: USB 0.0 started, EHCI 1.00 [ 2.352280] hub 4-0:1.0: USB hub found [ 2.361661] hub 4-0:1.0: 1 port detected [ 2.371468] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.403486] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver [ 2.417180] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 5 [ 2.430769] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400 [ 2.504565] hub 5-0:1.0: USB hub found [ 2.513783] hub 5-0:1.0: 1 port detected [ 2.543446] sunxi-ohci sunxi-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver [ 2.556989] sunxi-ohci sunxi-ohci.2: new USB bus registered, assigned bus number 6 [ 2.570482] sunxi-ohci sunxi-ohci.2: irq 107, io mem 0xf1c1b400 [ 2.644568] hub 6-0:1.0: USB hub found [ 2.653743] hub 6-0:1.0: 1 port detected [ 2.683512] sunxi-ohci sunxi-ohci.3: SW USB2.0 'Open' Host Controller (OHCI) Driver [ 2.697201] sunxi-ohci sunxi-ohci.3: new USB bus registered, assigned bus number 7 [ 2.710796] sunxi-ohci sunxi-ohci.3: irq 109, io mem 0xf1c1c400 [ 2.784604] hub 7-0:1.0: USB hub found [ 2.793839] hub 7-0:1.0: 1 port detected [ 2.823599] sunxi-ohci sunxi-ohci.4: SW USB2.0 'Open' Host Controller (OHCI) Driver [ 2.837318] sunxi-ohci sunxi-ohci.4: new USB bus registered, assigned bus number 8 [ 2.850954] sunxi-ohci sunxi-ohci.4: irq 111, io mem 0xf1c1d400 [ 2.924530] hub 8-0:1.0: USB hub found [ 2.933831] hub 8-0:1.0: 1 port detected [ 2.943534] Initializing USB Mass Storage driver... [ 2.954184] usbcore: registered new interface driver usb-storage [ 2.965905] USB Mass Storage support registered. [ 2.976147] usbcore: registered new interface driver ums-alauda [ 2.987870] usbcore: registered new interface driver ums-cypress [ 2.999673] usbcore: registered new interface driver ums-datafab [ 3.011329] usbcore: registered new interface driver ums_eneub6250 [ 3.023105] usbcore: registered new interface driver ums-freecom [ 3.034610] usbcore: registered new interface driver ums-isd200 [ 3.046048] usbcore: registered new interface driver ums-jumpshot [ 3.057531] usbcore: registered new interface driver ums-karma [ 3.068700] usbcore: registered new interface driver ums-onetouch [ 3.080059] usbcore: registered new interface driver ums-realtek [ 3.091215] usbcore: registered new interface driver ums-sddr09 [ 3.102191] usbcore: registered new interface driver ums-sddr55 [ 3.113121] usbcore: registered new interface driver ums-usbat [ 3.124670] mousedev: PS/2 mouse device common for all mice [ 3.135394] sunxikbd_init failed. [ 3.144089] ls_fetch_sysconfig_para: type err device_used = -1073057456. [ 3.156007] =========script_get_err============ [ 3.165631] [RTC] WARNING: Rtc time will be wrong!! [ 3.175351] [RTC] WARNING: use *internal OSC* as clock source [ 3.186276] sunxi-rtc sunxi-rtc: rtc core: registered sunxi-rtc as rtc0 [ 3.198057] i2c /dev entries driver [ 3.207156] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x18) [ 3.220972] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x19) [ 3.234678] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x1a) [ 3.248290] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x29) [ 3.261801] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x2a) [ 3.275286] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x2b) [ 3.288623] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4c) [ 3.301877] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4d) [ 3.315038] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4e) [ 3.328124] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x18) [ 3.341180] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x19) [ 3.354094] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x1a) [ 3.366912] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x29) [ 3.379644] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x2a) [ 3.392274] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x2b) [ 3.404871] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x4c) [ 3.417328] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x4d) [ 3.429692] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x4e) [ 3.441785] sunxi_wdt_init_module: sunxi WatchDog Timer Driver v1.0 [ 3.451804] sunxi_wdt_probe: devm_ioremap return wdt_reg 0xf1c20ca0, res->start 0x01c20ca0, res->end 0x01c20cbf [ 3.463253] sunxi_wdt_probe: initialized (g_timeout=16s, g_nowayout=0) [ 3.476732] wdt_enable, write reg 0xf1c20cb8 val 0x00000000 [ 3.486062] timeout_to_interv, line 167 [ 3.493395] interv_to_timeout, line 189 [ 3.500670] wdt_set_tmout, write 0x000000b0 to mode reg 0xf1c20cb8, actual timeout 16 sec [ 3.513435] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 3.526503] [cpu_freq] ERR:get cpu extremity frequency from sysconfig failed, use max_freq [ 3.545193] no blue_led, ignore it! [ 3.553047] no led_0, ignore it! [ 3.560257] no led_1, ignore it! [ 3.567411] no led_2, ignore it! [ 3.574556] no led_3, ignore it! [ 3.581712] no led_4, ignore it! [ 3.588831] no led_5, ignore it! [ 3.595947] no led_6, ignore it! [ 3.603059] no led_7, ignore it! [ 3.611069] usbcore: registered new interface driver usbhid [ 3.620865] usbhid: USB HID core driver [ 3.633172] asoc: sndcodec <-> sunxi-codec mapping ok [ 3.643537] [DAUDIO]sunxi-daudio cannot find any using configuration for controllers, return directly! [ 3.657784] [I2S]snddaudio cannot find any using configuration for controllers, return directly! [ 3.671338] [DAUDIO0] driver not init,just return. [ 3.684299] mmc0: new high speed SDHC card at address 1234 [ 3.684362] asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok [ 3.685744] oprofile: using arm/armv7-ca7 [ 3.712086] u32 classifier [ 3.718827] Performance counters on [ 3.718873] mmcblk0: mmc0:1234 SA04G 3.68 GiB [ 3.735591] input device check on [ 3.735699] mmcblk0: p1 [ 3.736258] mmcblk mmc0:1234: Card claimed for testing. [ 3.736271] mmc0:1234: SA04G 3.68 GiB [ 3.768185] Actions configured [ 3.776258] IPv4 over IPv4 tunneling driver [ 3.785717] TCP: bic registered [ 3.793439] TCP: cubic registered [ 3.801366] TCP: westwood registered [ 3.809608] TCP: highspeed registered [ 3.818013] TCP: hybla registered [ 3.826062] TCP: htcp registered [ 3.834029] TCP: vegas registered [ 3.842125] TCP: veno registered [ 3.850148] TCP: scalable registered [ 3.858445] TCP: lp registered [ 3.866017] TCP: yeah registered [ 3.873647] TCP: illinois registered [ 3.881585] Initializing XFRM netlink socket [ 3.890530] NET: Registered protocol family 10 [ 3.900656] NET: Registered protocol family 17 [ 3.909464] NET: Registered protocol family 15 [ 3.918130] Registering the dns_resolver key type [ 3.927536] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 3.939722] ThumbEE CPU extension supported. [ 3.948141] Registering SWP/SWPB emulation handler [ 3.957809] registered taskstats version 1 [ 3.966677] cmdline,disp= [ 4.004846] ths_fetch_sysconfig_para: type err device_used = 1. [ 4.016980] CPU Budget:corekeeper enabled [ 4.025965] CPU Budget:Register notifier [ 4.034449] CPU Budget:register Success [ 4.042851] sunxi-budget-cooling sunxi-budget-cooling: Cooling device registered: thermal-budget-0 [ 4.060656] ALSA device list: [ 4.068245] #0: audiocodec [ 4.075673] #1: sndhdmi [ 4.083513] Freeing init memory: 332K Loading, please wait... [ 4.133621] systemd-udevd[97]: starting version 215 [ 4.610054] [DISP] disp_device_attached_and_enable,line:159:attched ok, mgr0<-->device0, type=4, mode=5 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... [ 5.007313] Btrfs loaded Scanning for Btrfs filesystems done. Begin: Will now check root file system ... fsck from util-linux 2.25.2 [/sbin/fsck.ext4 (1) -- /dev/mmcblk0p1] fsck.ext4 -a -C0 /dev/mmcblk0p1 /dev/mmcblk0p1: recovering journal /dev/mmcblk0p1: clean, 47701/218624 files, 277133/915200 blocks done. [ 7.005157] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null) done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. [ 8.330331] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) [ 8.350203] systemd[1]: Detected architecture 'arm'. Welcome to �[1mDebian GNU/Linux 8 (jessie)�[0m! [ 8.412685] systemd[1]: Set hostname to <orangepione>. [ 8.851535] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. [ 8.880867] systemd[1]: Expecting device dev-ttyS0.device... Expecting device dev-ttyS0.device... [ 8.910177] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 8.924225] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.938008] systemd[1]: Starting Remote File Systems (Pre). [�[32m OK �[0m] Reached target Remote File Systems (Pre). [ 8.970131] systemd[1]: Reached target Remote File Systems (Pre). [ 8.982357] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. [ 8.996928] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 9.011406] systemd[1]: Starting Paths. [�[32m OK �[0m] Reached target Paths. [ 9.040129] systemd[1]: Reached target Paths. [ 9.050640] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. [�[32m OK �[0m] Set up automount Arbitrary Executable File Formats F...utomount Point. [ 9.090130] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 9.106567] systemd[1]: Starting Encrypted Volumes. [�[32m OK �[0m] Reached target Encrypted Volumes. [ 9.140114] systemd[1]: Reached target Encrypted Volumes. [ 9.152154] systemd[1]: Starting Swap. [�[32m OK �[0m] Reached target Swap. [ 9.180122] systemd[1]: Reached target Swap. [ 9.190889] systemd[1]: Starting Root Slice. [�[32m OK �[0m] Created slice Root Slice. [ 9.220121] systemd[1]: Created slice Root Slice. [ 9.231386] systemd[1]: Starting Delayed Shutdown Socket. [�[32m OK �[0m] Listening on Delayed Shutdown Socket. [ 9.260122] systemd[1]: Listening on Delayed Shutdown Socket. [ 9.272636] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [�[32m OK �[0m] Listening on /dev/initctl Compatibility Named Pipe. [ 9.310120] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 9.324157] systemd[1]: Starting Journal Socket (/dev/log). [�[32m OK �[0m] Listening on Journal Socket (/dev/log). [ 9.360127] systemd[1]: Listening on Journal Socket (/dev/log). [ 9.372880] systemd[1]: Starting User and Session Slice. [�[32m OK �[0m] Created slice User and Session Slice. [ 9.400130] systemd[1]: Created slice User and Session Slice. [ 9.412738] systemd[1]: Starting udev Control Socket. [�[32m OK �[0m] Listening on udev Control Socket. [ 9.440136] systemd[1]: Listening on udev Control Socket. [ 9.452305] systemd[1]: Starting udev Kernel Socket. [�[32m OK �[0m] Listening on udev Kernel Socket. [ 9.480133] systemd[1]: Listening on udev Kernel Socket. [ 9.492256] systemd[1]: Starting Journal Socket. [�[32m OK �[0m] Listening on Journal Socket. [ 9.520125] systemd[1]: Listening on Journal Socket. [ 9.531787] systemd[1]: Starting System Slice. [�[32m OK �[0m] Created slice System Slice. [ 9.560133] systemd[1]: Created slice System Slice. [ 9.571606] systemd[1]: Starting Increase datagram queue length... Starting Increase datagram queue length... [ 9.670725] systemd[1]: Starting Restore / save the current clock... Starting Restore / save the current clock... [ 9.800789] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 9.890812] systemd[1]: Mounting Debug File System... Mounting Debug File System... [ 9.970830] systemd[1]: Starting Create list of required static device nodes for the current kernel... Starting Create list of required static device nodes...rrent kernel... [ 10.100780] systemd[1]: Starting udev Coldplug all Devices... Starting udev Coldplug all Devices... [ 10.215837] systemd[1]: Started Set Up Additional Binary Formats. [ 10.228528] systemd[1]: Mounted Huge Pages File System. [ 10.240161] systemd[1]: Starting system-getty.slice. [�[32m OK �[0m] Created slice system-getty.slice. [ 10.270203] systemd[1]: Created slice system-getty.slice. [ 10.281605] systemd[1]: Starting system-serial\x2dgetty.slice. [�[32m OK �[0m] Created slice system-serial\x2dgetty.slice. [ 10.310139] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 10.327228] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 10.430755] systemd[1]: Started File System Check on Root Device. [ 10.442778] systemd[1]: Starting LSB: Set keymap... Starting LSB: Set keymap... [ 10.550511] systemd[1]: Starting Slices. [�[32m OK �[0m] Reached target Slices. [ 10.580174] systemd[1]: Reached target Slices. [�[32m OK �[0m] Mounted Debug File System. [ 10.610156] systemd[1]: Mounted Debug File System. [�[32m OK �[0m] Mounted POSIX Message Queue File System. [ 10.640161] systemd[1]: Mounted POSIX Message Queue File System. [�[32m OK �[0m] Started Increase datagram queue length. [ 10.740139] systemd[1]: Started Increase datagram queue length. [�[32m OK �[0m] Started Restore / save the current clock. [ 10.830160] systemd[1]: Started Restore / save the current clock. [�[32m OK �[0m] Started Create list of required static device nodes ...current kernel. [ 10.920148] systemd[1]: Started Create list of required static device nodes for the current kernel. [�[32m OK �[0m] Started Load Kernel Modules. [ 11.130199] systemd[1]: Started Load Kernel Modules. [�[32m OK �[0m] Started LSB: Set keymap. [ 11.210157] systemd[1]: Started LSB: Set keymap. [�[32m OK �[0m] Started udev Coldplug all Devices. [ 11.300141] systemd[1]: Started udev Coldplug all Devices. [ 11.313624] systemd[1]: Time has been changed [ 11.323312] systemd[1]: Starting Apply Kernel Variables... Starting Apply Kernel Variables... [ 11.410848] systemd[1]: Mounting FUSE Control File System... Mounting FUSE Control File System... [ 11.530783] systemd[1]: Mounted Configuration File System. [ 11.542097] systemd[1]: Starting Create Static Device Nodes in /dev... Starting Create Static Device Nodes in /dev... [ 11.650778] systemd[1]: Starting Syslog Socket. [�[32m OK �[0m] Listening on Syslog Socket. [ 11.680228] systemd[1]: Listening on Syslog Socket. [ 11.690351] systemd[1]: Starting Journal Service... Starting Journal Service... [�[32m OK �[0m] Started Journal Service. [ 11.830239] systemd[1]: Started Journal Service. [�[32m OK �[0m] Mounted FUSE Control File System. [�[32m OK �[0m] Started Apply Kernel Variables. [�[32m OK �[0m] Started Create Static Device Nodes in /dev. Starting udev Kernel Device Manager... [ 12.221124] systemd-udevd[175]: starting version 215 [�[32m OK �[0m] Started udev Kernel Device Manager. Starting Copy rules generated while the root was ro... Starting LSB: Set preliminary keymap... Starting LSB: Tune IDE hard disks... [ 12.494090] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x48) [ 12.508478] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x48, dev addr: 0x48) [�[32m OK �[0m] Started Copy rules generated while the root was ro. [�[32m OK �[0m] Started LSB: Tune IDE hard disks. [�[32m OK �[0m] Found device /dev/ttyS0. [�[32m OK �[0m] Created slice system-ifup.slice. [�[32m OK �[0m] Reached target Sound Card. [�[32m OK �[0m] Started LSB: Set preliminary keymap. Starting Remount Root and Kernel File Systems... [ 13.095265] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro [�[32m OK �[0m] Started Remount Root and Kernel File Systems. [�[32m OK �[0m] Reached target Local File Systems (Pre). Mounting /tmp... Starting Load/Save Random Seed... [�[32m OK �[0m] Mounted /tmp. [�[32m OK �[0m] Started Load/Save Random Seed. [�[32m OK �[0m] Reached target Local File Systems. Starting Armbian enhanced Log2Ram... Starting Create Volatile Files and Directories... Starting LSB: Raise network interfaces.... [�[32m OK �[0m] Reached target Remote File Systems. Starting Trigger Flushing of Journal to Persistent Storage... Starting LSB: Prepare console... Starting LSB: Restore and store ALSA driver settings... [�[32m OK �[0m] Started Armbian enhanced Log2Ram. [�[32m OK �[0m] Started Create Volatile Files and Directories. [�[32m OK �[0m] Started LSB: Prepare console. [�[32m OK �[0m] Started LSB: Restore and store ALSA driver settings. Starting LSB: Set console font and keymap... Starting Update UTMP about System Boot/Shutdown... [ 15.130775] systemd-journald[173]: Received request to flush runtime journal from PID 1 [�[32m OK �[0m] Started Trigger Flushing of Journal to Persistent Storage. [�[32m OK �[0m] Started Update UTMP about System Boot/Shutdown. [ 15.437396] gmac0: probed [ 15.445248] gmac0 gmac0: eth0: eth0: PHY ID 00441400 at 0 IRQ poll (gmac0-0:00) [�[32m OK �[0m] Started LSB: Set console font and keymap. 3[�[32m OK �[0m] Started LSB: Raise network interfaces.. Starting ifup for eth0... [�[32m OK �[0m] Started ifup for eth0. [�[32m OK �[0m] Reached target Network. [�[32m OK �[0m] Reached target Network is Online. [�[32m OK �[0m] Reached target System Initialization. [�[32m OK �[0m] Listening on D-Bus System Message Bus Socket. [�[32m OK �[0m] Reached target Sockets. [�[32m OK �[0m] Reached target Timers. [�[32m OK �[0m] Reached target Basic System. Starting Entropy daemon using the HAVEGE algorithm... [�[32m OK �[0m] Started Entropy daemon using the HAVEGE algorithm. Starting OpenBSD Secure Shell server... [�[32m OK �[0m] Started OpenBSD Secure Shell server. Starting System Logging Service... Starting Regular background program processing daemon... [�[32m OK �[0m] Started Regular background program processing daemon. Starting /etc/rc.local Compatibility... Starting Login Service... Starting Permit User Sessions... Starting D-Bus System Message Bus... [�[32m OK �[0m] Started D-Bus System Message Bus. Starting LSB: network connection manager... Starting LSB: Start/stop sysstat's sadc... Starting LSB: disk temperature monitoring daemon... Starting LSB: Load kernel modules needed to enable cpufreq scaling... Starting LSB: Advanced IEEE 802.11 management daemon... Starting LSB: Starts LIRC daemon.... Starting LSB: Flightradar24 Decoder & Feeder... Starting LSB: Armbian gathering hardware information... Starting LSB: Start NTP daemon... Starting LSB: dump1090 initscript... [�[32m OK �[0m] Started System Logging Service. [�[32m OK �[0m] Started /etc/rc.local Compatibility. [�[32m OK �[0m] Started Permit User Sessions. [�[32m OK �[0m] Started LSB: network connection manager. [�[32m OK �[0m] Started LSB: Start/stop sysstat's sadc. [�[32m OK �[0m] Started LSB: disk temperature monitoring daemon. [�[32m OK �[0m] Started LSB: Load kernel modules needed to enable cpufreq scaling. [�[32m OK �[0m] Started LSB: Advanced IEEE 802.11 management daemon. [�[32m OK �[0m] Started LSB: Starts LIRC daemon.. [�[32m OK �[0m] Started LSB: Flightradar24 Decoder & Feeder. [�[32m OK �[0m] Started LSB: Armbian gathering hardware information. [�[32m OK �[0m] Started LSB: Start NTP daemon. Starting LSB: set CPUFreq kernel parameters... Starting Getty on tty1... [�[32m OK �[0m] Started Getty on tty1. Starting Serial Getty on ttyS0... [�[32m OK �[0m] Started Serial Getty on ttyS0. [�[32m OK �[0m] Reached target Login Prompts. [�[32m OK �[0m] Started Login Service. [�[32m OK �[0m] Started LSB: set CPUFreq kernel parameters. Starting LSB: Set sysfs variables from /etc/sysfs.conf... [�[32m OK �[0m] Started LSB: Set sysfs variables from /etc/sysfs.conf. [�[32m OK �[0m] Reached target Multi-User System. [�[32m OK �[0m] Reached target Graphical Interface. Starting Update UTMP about System Runlevel Changes... [�[32m OK �[0m] Started Update UTMP about System Runlevel Changes. Debian GNU/Linux 8 orangepione ttyS0