Open-Mesh OM2P-HS v3

From TechInfoDepot
Jump to navigationJump to search
multiple revisions of this device, use caution
bgn (N300)
mesh node, access point
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Tomato any flavor
Incompatible
Gargoyle
Status Unknown
Platform
BrandModelRev
Open-Mesh OM2P-HS v3
FCC ID
none specified
Type
mesh node, access point
CPU1
Atheros AR9341
CPU1 Speed
535 MHz
Flash1 Chip
Brand? Model?
Flash1 Size
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Size
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br />
RAM1 Chip
Brand? Model?
ETH chip1
Atheros AR9341
Switch
Atheros AR9341
Ethernet Port Count
2-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: none specified

Stock bootloader
U-Boot
Expansion IF types
none specified
PoE
802.3af, standard
Serial Port (UART)
yes
Other
3rd Party Firmware Support
OpenWrt • (List | Dev | DLs)
Radio 1
Chip1
Atheros AR9341
Wireless interface OUI
none specified
Antenna Connector Type
none specified
MIMO status
2x2:2
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 300 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz
 CPU1 brandRadio1 chip1 brandRadio1 chip2 brand
Open-Mesh OM2P v1AtherosAtheros
Open-Mesh OM2P v2AtherosAtheros
Open-Mesh OM2P v4Qualcomm AtherosQualcomm Atheros
Open-Mesh OM2P-HS v1AtherosAtheros
Open-Mesh OM2P-HS v2AtherosAtheros
Open-Mesh OM2P-HS v3AtherosAtheros
Open-Mesh OM2P-HS v4Qualcomm AtherosQualcomm Atheros
Open-Mesh OM2P-LCAtherosAtheros

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.

For a list of all currently documented Open-Mesh device with specifications, see Open-Mesh.

300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Flashing

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)
OpenWrt Target: ath79
OpenWrt Subtarget: generic
OpenWrt Package architecture: mips_24kc
Support started version: 21.02.0
Current supported version: 23.05.5

Please insert instructions here