NixCore
From TechInfoDepot
Jump to navigationJump to searchbgn (N150) | |
|---|---|
| mini module | |
| Homepage | |
| 3rd Party Firmware | |
| dd-wrt |
Status Unknown |
| OpenWrt | |
| Tomato any flavor |
Incompatible |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
NixCore X1 |
| FCC ID |
none specified |
| Type |
mini module |
| CPU1 |
Ralink RT5350 |
| CPU1 Type |
MIPS 24KEc |
| CPU1 Speed |
360 MHz |
| Flash1 Chip |
Brand? Model? |
| Flash1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
| RAM1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
| RAM1 Chip |
Brand? Model? |
| ETH chip1 |
Brand? Model? |
| Wired Standard |
IEEE 802.3i/3u |
| Stock bootloader |
U-Boot |
| Expansion IF types |
none specified |
| Power |
3.3 VDC, ? A |
| Connector type |
none (pads) |
| Other | |
|
| |
| 3rd Party Firmware Support | |
| Retail | |
| (Est.) initial retail price (in USD): | $30 |
| Radio 1 | |
| Chip1 |
Ralink RT5350 |
| Wireless interface OUI |
00:02:2A |
| Antenna Connector Type |
U.FL |
| MIMO status |
1x1:1 |
| Wireless Standard |
IEEE 802.11b/g/n |
| 802.11n |
up to 150 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
For a list of all currently documented NixCore device with specifications, see NixCore.
- • 150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class
Overview
"LP962M00A1 Ver 1.3" is silkscreened on the board shown on the NixCore site.
- The board on the site has a MAC label with an OUI of 00:02:2A (Asound). It might be wrong, who knows..
Links of Interest
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram. DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 4/32 warning for details. |
| This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now. |
| OpenWrt support for this device has ended in 2022. 19.07.10 was the last official build for 4/32 devices. |
On the OpenWrt ToH (techdata entry)
OpenWrt Target: ramips
OpenWrt Subtarget: rt305x
OpenWrt Package architecture: mipsel_24kc
Support started version: 17.01.0
Current supported version: 22.03.7
Comment:
Vendor firmware is based on OpenWrt/LEDE.
OpenWrt Target: ramips
OpenWrt Subtarget: rt305x
OpenWrt Package architecture: mipsel_24kc
Support started version: 17.01.0
Current supported version: 22.03.7
Comment:
Vendor firmware is based on OpenWrt/LEDE.
Please insert instructions here
