Netool NE1

From TechInfoDepot
Jump to navigationJump to search
bgn (N150)
Battery operated Ethernet Packet analyzer and Wi-Fi router
Homepage
Downloads
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Status Unknown
Tomato any flavor
Incompatible
Platform
BrandModelRev
Netool NE1
FCC ID
Board ID
YJ18650V3
Type
wireless router, WiFi security auditing tool
CPU1
Ralink RT5350F
CPU1 Type
MIPS 24KEc
CPU1 Speed
360 MHz
Flash1 Chip
Winbond W25Q128JVSQ
Flash1 Size
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Size
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br />
RAM1 Chip
ESMT M12L2561616A-6T
ETH chip1
Ralink RT5350F
Ethernet Port Count
1-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: 70:B3:D5 (-, 1 W)
Ethernet OUI: 64:51:7E (1 E, 2 W)

Stock bootloader
U-Boot 1.1.3 Ralink UBoot
Stock FW OS
Linux 4.4.7 OpenWRT
Expansion IF types
USB 2.0
USB ports
1
USB Hub Compatible
Untested
Power
5 VDC, 1 A
Connector type
USB Female Micro-B
Flags:
battery backup

Additional chips
Battery Management;STM;STM8S003F3;;1;

Other

Default SSID: netool-DEFAULT
Default IP address: 192.168.42.1

Retail
FCC approval date 31 May 2018
(Est.) initial retail price (in USD): $179
ASIN B01L9W8FB8 Flag of the United States.svg
Radio 1
Chip1
Ralink RT5350F
Wireless interface OUI
70:B3:D5,
Antenna Connector Type
soldered
MIMO status
1x1:1
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 150 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz

For a list of all currently documented Ralink chipsets with specifications, see Ralink.

150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class

Overview

"YJ18650V3" is silkscreened on the board in the FCC photos.

CPU: Ralink RT5350F (MIPS 24KEc V4.12)

JTAG-Serial Info

Serial

dmesg boot

boot log • >>
[    0.000000] Linux version 4.4.7 (nate@ninja) (gcc version 5.3.0 
     (OpenWrt GCC 5.3.0 r49395) ) #215 Tue Mar 26 18:04:42 UTC 2019
[    0.000000] SoC Type: Ralink RT5350 id:1 rev:3
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 0001964c (MIPS 24KEc)
[    0.000000] MIPS: machine is HAME MPR-A2
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000001ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000001ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000001ffffff]
[    0.000000] On node 0 totalpages: 8192
[    0.000000] free_area_init_node: node 0, pgdat 80360390, node_mem_map 81000000
[    0.000000]   Normal zone: 64 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 8192 pages, LIFO batch:0
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Writing ErrCtl register=0004d290
[    0.000000] Readback ErrCtl register=0004d290
[    0.000000] Memory: 28508K/32768K available (2764K kernel code, 124K rwdata, 
     660K rodata, 156K init, 191K bss, 4260K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:256
[    0.000000] CPU Clock: 360MHz
[    0.000000] clocksource: systick: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 583261500 ns
[    0.000000] systick: running - mult: 214748, shift: 32
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 10618113593 ns
[    0.000016] sched_clock: 32 bits at 180MHz, resolution 5ns, wraps every 11930464253ns
[    0.015667] Calibrating delay loop... 239.61 BogoMIPS (lpj=1198080)
[    0.090871] pid_max: default: 32768 minimum: 301
[    0.100274] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.113348] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.136302] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.156132] pinctrl core: initialized pinctrl subsystem
[    0.167841] NET: Registered protocol family 16
[    0.182545] rt2880-pinmux pinctrl: try to register 28 pins ...
[    0.182594] pinctrl core: registered pin 0 (io0) on rt2880-pinmux
[    0.182664] pinctrl core: registered pin 1 (io1) on rt2880-pinmux
[    0.182685] pinctrl core: registered pin 2 (io2) on rt2880-pinmux
[    0.182704] pinctrl core: registered pin 3 (io3) on rt2880-pinmux
[    0.182723] pinctrl core: registered pin 4 (io4) on rt2880-pinmux
[    0.182741] pinctrl core: registered pin 5 (io5) on rt2880-pinmux
[    0.182760] pinctrl core: registered pin 6 (io6) on rt2880-pinmux
[    0.182779] pinctrl core: registered pin 7 (io7) on rt2880-pinmux
[    0.182798] pinctrl core: registered pin 8 (io8) on rt2880-pinmux
[    0.182817] pinctrl core: registered pin 9 (io9) on rt2880-pinmux
[    0.182836] pinctrl core: registered pin 10 (io10) on rt2880-pinmux
[    0.182854] pinctrl core: registered pin 11 (io11) on rt2880-pinmux
[    0.182874] pinctrl core: registered pin 12 (io12) on rt2880-pinmux
[    0.182892] pinctrl core: registered pin 13 (io13) on rt2880-pinmux
[    0.182911] pinctrl core: registered pin 14 (io14) on rt2880-pinmux
[    0.182930] pinctrl core: registered pin 15 (io15) on rt2880-pinmux
[    0.182949] pinctrl core: registered pin 16 (io16) on rt2880-pinmux
[    0.182968] pinctrl core: registered pin 17 (io17) on rt2880-pinmux
[    0.182986] pinctrl core: registered pin 18 (io18) on rt2880-pinmux
[    0.183023] pinctrl core: registered pin 19 (io19) on rt2880-pinmux
[    0.183043] pinctrl core: registered pin 20 (io20) on rt2880-pinmux
[    0.183062] pinctrl core: registered pin 21 (io21) on rt2880-pinmux
[    0.183081] pinctrl core: registered pin 22 (io22) on rt2880-pinmux
[    0.183100] pinctrl core: registered pin 23 (io23) on rt2880-pinmux
[    0.183119] pinctrl core: registered pin 24 (io24) on rt2880-pinmux
[    0.183137] pinctrl core: registered pin 25 (io25) on rt2880-pinmux
[    0.183156] pinctrl core: registered pin 26 (io26) on rt2880-pinmux
[    0.183175] pinctrl core: registered pin 27 (io27) on rt2880-pinmux
[    0.183250] pinctrl core: add 5 pinctrl maps
[    0.183310] rt2880-pinmux pinctrl: found group selector 0 for i2c
[    0.183344] rt2880-pinmux pinctrl: found group selector 4 for jtag
[    0.183376] rt2880-pinmux pinctrl: invalid group "rgmii" for function "gpio"
[    0.197378] rt2880-pinmux pinctrl: invalid group "mdio" for function "gpio"
[    0.211158] rt2880-pinmux pinctrl: found group selector 2 for uartf
[    0.211197] rt2880-pinmux pinctrl: request pin 1 (io1) for pinctrl
[    0.211227] rt2880-pinmux pinctrl: request pin 2 (io2) for pinctrl
[    0.211261] rt2880-pinmux pinctrl: request pin 17 (io17) for pinctrl
[    0.211289] rt2880-pinmux pinctrl: request pin 18 (io18) for pinctrl
[    0.211316] rt2880-pinmux pinctrl: request pin 19 (io19) for pinctrl
[    0.211343] rt2880-pinmux pinctrl: request pin 20 (io20) for pinctrl
[    0.211370] rt2880-pinmux pinctrl: request pin 21 (io21) for pinctrl
[    0.211402] rt2880-pinmux pinctrl: request pin 7 (io7) for pinctrl
[    0.211429] rt2880-pinmux pinctrl: request pin 8 (io8) for pinctrl
[    0.211456] rt2880-pinmux pinctrl: request pin 9 (io9) for pinctrl
[    0.211483] rt2880-pinmux pinctrl: request pin 10 (io10) for pinctrl
[    0.211510] rt2880-pinmux pinctrl: request pin 11 (io11) for pinctrl
[    0.211537] rt2880-pinmux pinctrl: request pin 12 (io12) for pinctrl
[    0.211564] rt2880-pinmux pinctrl: request pin 13 (io13) for pinctrl
[    0.211591] rt2880-pinmux pinctrl: request pin 14 (io14) for pinctrl
[    0.211621] rt2880-pinmux pinctrl: failed to lookup the sleep state
[    0.247495] rt2880_gpio 10000600.gpio: registering 22 gpios
[    0.258615] rt2880_gpio 10000600.gpio: registering 22 irq handlers
[    0.273827] clocksource: Switched to clocksource MIPS
[    0.286706] NET: Registered protocol family 2
[    0.297056] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.310951] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.323535] TCP: Hash tables configured (established 1024 bind 1024)
[    0.336397] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.348026] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.361015] NET: Registered protocol family 1
[    0.370773] rt-timer 10000100.timer: maximum frequency is 3662Hz
[    0.384237] alarmtimer alarmtimer: no of_node; not parsing pinctrl DT
[    0.384802] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.441023] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.452672] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.478734] io scheduler noop registered
[    0.486543] io scheduler deadline registered (default)
[    0.497130] ralink-usb-phy usbphy: invalid resource
[    0.507733] rt2880-pinmux pinctrl: request pin 7 (io7) for pio:7
[    0.508103] rt2880-pinmux pinctrl: request pin 12 (io12) for pio:12
[    0.508408] gpio-export gpio_export: 2 gpio(s) exported
[    0.519360] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    0.533115] serial8250 serial8250: no of_node; not parsing pinctrl DT
[    0.533735] pinctrl core: add 1 pinctrl maps
[    0.533944] rt2880-pinmux pinctrl: found group selector 3 for uartlite
[    0.533999] rt2880-pinmux pinctrl: request pin 15 (io15) for 10000c00.uartlite
[    0.534030] rt2880-pinmux pinctrl: request pin 16 (io16) for 10000c00.uartlite
[    0.534533] console [ttyS0] disabled
[    0.541575] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a Palmchip BK-3103
[    0.561400] console [ttyS0] enabled
[    0.575180] bootconsole [early0] disabled
[    0.593425] pinctrl core: add 1 pinctrl maps
[    0.593513] rt2880-pinmux pinctrl: found group selector 1 for spi
[    0.593555] rt2880-pinmux pinctrl: request pin 3 (io3) for 10000b00.spi
[    0.593585] rt2880-pinmux pinctrl: request pin 4 (io4) for 10000b00.spi
[    0.593612] rt2880-pinmux pinctrl: request pin 5 (io5) for 10000b00.spi
[    0.593640] rt2880-pinmux pinctrl: request pin 6 (io6) for 10000b00.spi
[    0.602246] spi spi0.0: force spi mode3
[    0.610894] m25p80 spi0.0: w25q128 (16384 Kbytes)
[    0.620470] 4 ofpart partitions found on MTD device spi0.0
[    0.631467] Creating 4 MTD partitions on "spi0.0":
[    0.641087] 0x000000000000-0x000000030000 : "u-boot"
[    0.654937] 0x000000030000-0x000000040000 : "u-boot-env"
[    0.669482] 0x000000040000-0x000000050000 : "factory"
[    0.683559] 0x000000050000-0x000000800000 : "firmware"
[    0.736562] 2 uimage-fw partitions found on MTD device firmware
[    0.748503] 0x000000050000-0x00000017aef1 : "kernel"
[    0.761743] 0x00000017aef1-0x000000800000 : "rootfs"
[    0.775756] mtd: device 5 (rootfs) set to be root filesystem
[    0.787353] 1 squashfs-split partitions found on MTD device rootfs
[    0.799775] 0x0000006c0000-0x000000800000 : "rootfs_data"
[    0.820426] rt3050-esw 10110000.esw: link changed 0x00
[    0.834611] mtk_soc_eth 10100000.ethernet eth0: MediaTek frame engine at 0xb0100000, irq 5
[    0.852340] rt2880_wdt 10000120.watchdog: Initialized
[    0.865656] NET: Registered protocol family 10
[    0.883247] NET: Registered protocol family 17
[    0.892479] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. 
               Update your scripts to load br_netfilter if you need this.
[    0.917768] 8021q: 802.1Q VLAN Support v1.8
[    0.945481] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
[    0.961350] Freeing unused kernel memory: 156K (80379000 - 803a0000)
[    3.526732] init: Console is alive
[    3.534219] init: - watchdog -
[    6.290646] usbcore: registered new interface driver usbfs
[    6.301980] usbcore: registered new interface driver hub
[    6.312997] usbcore: registered new device driver usb
[    6.333144] Button Hotplug driver version 0.4.1
[    6.346598] rt2880-pinmux pinctrl: request pin 0 (io0) for pio:0
[    6.364129] SCSI subsystem initialized
[    6.383959] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    6.400287] ehci-platform: EHCI generic platform driver
[    6.421454] phy phy-usbphy.0: remote usb device wakeup disabled
[    6.433347] phy phy-usbphy.0: UTMI 16bit 30MHz
[    6.442342] ehci-platform 101c0000.ehci: EHCI Host Controller
[    6.453970] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1
[    6.470107] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
[    6.493956] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
[    6.507846] usb usb1: no of_node; not parsing pinctrl DT
[    6.508782] hub 1-0:1.0: no of_node; not parsing pinctrl DT
[    6.508903] hub 1-0:1.0: USB hub found
[    6.517550] hub 1-0:1.0: 1 port detected
[    6.529346] rt2880-pinmux pinctrl: request pin 20 (io20) for pio:20
[    6.529709] rt2880-pinmux pinctrl: request pin 17 (io17) for pio:17
[    6.539398] usbcore: registered new interface driver usb-storage
[    6.562234] init: - preinit -
[    7.849977] rt3050-esw 10110000.esw: link changed 0x00
[    8.116616] random: procd urandom read with 13 bits of entropy available
[    9.539617] rt3050-esw 10110000.esw: link changed 0x10
[   11.500651] mount_root: loading kmods from internal overlay
[   12.518539] jffs2: notice: (325) jffs2_build_xattr_subsystem: complete building xattr subsystem, 
               0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[   12.550654] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[   12.601119] block: extroot: not configured
[   12.818876] jffs2: notice: (322) jffs2_build_xattr_subsystem: complete building xattr subsystem, 
               0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[   13.478353] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[   13.526992] block: extroot: not configured
[   13.537215] mount_root: switching to jffs2 overlay
[   13.601039] procd: - early -
[   13.607817] procd: - watchdog -
[   14.640501] procd: - ubus -
[   14.702316] procd: - init -
[   16.415397] zram: Added device: zram0
[   16.497649] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   16.555388] Netfilter messages via NETLINK v0.30.
[   16.571350] ip_set: protocol 6
[   16.651039] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68
[   16.665959] Backport generated by backports.git backports-20151218-0-g2f58d9d
[   16.691440] ip_tables: (C) 2000-2006 Netfilter Core Team
[   16.727222] nf_conntrack version 0.5.0 (447 buckets, 1788 max)
[   16.812679] xt_time: kernel timezone is -0000
[   16.991456] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5350, rev 0500 detected
[   17.007089] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5350 detected
[   17.022154] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   20.324597] zram0: detected capacity change from 0 to 13631488
[   20.363409] Adding 13308k swap on /dev/zram0.  Priority:-1 extents:1 across:13308k SS
[   21.982326] rt3050-esw 10110000.esw: link changed 0x00
[   23.688599] rt3050-esw 10110000.esw: link changed 0x10
[   30.649924] device eth0.1 entered promiscuous mode
[   30.659624] device eth0 entered promiscuous mode
[   30.764195] br-lan: port 1(eth0.1) entered forwarding state
[   30.775562] br-lan: port 1(eth0.1) entered forwarding state
[   32.773945] br-lan: port 1(eth0.1) entered forwarding state
[   38.014211] rt2880-pinmux pinctrl: request pin 14 (io14) for pio:14
[   38.487733] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   48.214258] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   68.182150] random: nonblocking pool is initialized
[ 1468.412802] rt3050-esw 10110000.esw: link changed 0x00
[ 1470.133592] rt3050-esw 10110000.esw: link changed 0x10


Pictures

User Images