Netgear WNDR4000
abgn (AN750) | |
---|---|
N750 Wireless Dual Band Gigabit Router | |
Homepage | |
Support | |
Wikipedia | |
InfoDepot Wiki | |
WikiDevi.wi-cat.ru | |
3rd Party Firmware | |
dd-wrt |
Status Unknown |
OpenWrt |
Status Unknown |
Tomato any flavor |
Status Unknown |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
Netgear WNDR4000 |
FCC ID | |
IC ID | |
Type |
wireless router |
CPU1 |
Broadcom BCM4718A1 |
CPU1 Type |
MIPS 74Kc |
CPU1 Speed |
480 MHz |
Flash1 Chip |
Macronix MX25L6445E |
Flash1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> |
RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
RAM1 Chip |
Winbond W9751G6JB-25 |
nvram Size |
64K |
ETH chip1 |
Broadcom BCM4718A1 |
Switch |
Broadcom BCM53115 |
Ethernet Port Count |
1-1GbE-WAN 4-1GbE-LAN |
Wired Standard |
IEEE 802.3/3u/3ab |
802dot11 OUI: 20:4E:7F (16 E, 16 W), 20:E5:2A (5 E, 7 W), 4C:60:DE (4 E, 6 W), A0:21:B7 (9 E, 8 W), C4:3D:C7 (8 E, 5 W), E0:46:9A (14 E, 15 W), E0:91:F5 (11 E, 12 W) | |
Expansion IF types |
USB 2.0 |
USB ports |
1 |
USB Hub Compatible |
Untested |
Power |
12 VDC, 2.5 A |
Connector type |
barrel |
Serial Port (UART) |
yes |
Additional chips | |
Other | |
Default IP address: 192.168.1.1 | |
Manuf/OEM/ODM |
Foxconn U12H181 T00 |
3rd Party Firmware Support | |
Retail | |
Availability | common |
FCC approval date | 03 March 2011 |
(Est.) release date | 27 February 2011 |
UPC |
606449077629 (UPC DB, On eBay) |
ASIN | B004PA2B6C |
Country of manuf | China |
Physical | |
Dimensions |
223 x 153 x 31 mm (8.8 x 6.0 x 1.2 in) |
Radio 1 | |
Chip1 |
Broadcom BCM4718A1 |
Wireless interface OUI |
20:4E:7F, 20:E5:2A, 4C:60:DE, A0:21:B7, C4:3D:C7, E0:46:9A, E0:91:F5 |
Antenna Connector Type |
U.FL, Internal |
MIMO status |
2x2:2 |
Wireless Standard |
IEEE 802.11b/g/n |
802.11n |
up to 300 Mbps |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
Radio cor_rev |
17 |
Radio 2 | |
Chip1 |
Broadcom BCM4331 |
Wireless interface OUI |
20:4E:7F, 20:E5:2A, 4C:60:DE, A0:21:B7, C4:3D:C7, E0:46:9A, E0:91:F5 |
Antenna Connector Type |
U.FL, Internal |
MIMO status |
3x3:3 |
Wireless Standard |
IEEE 802.11a/n |
802.11n |
up to 450 Mbps |
802.11a |
up to 54 Mbps |
WiFi Operating Frequency |
5 GHz |
Radio cor_rev |
29 |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Netgear device with specifications, see Netgear.
Overview
The manual states the default SSIDs are NETGEAR (b/g/n radio) and NETGEAR-5G
- (a/n radio).. but NETGEARXX and NETGEARXX-5G may instead be used.
"U12H181T00" and "REV. 1 GP" is silkscreened on the main board.
- OEM: Foxconn U12H181T00
Links of Interest
Wikis
Reviews
- C4:3D:C7 OUI
Forum threads
Third party firmware support
This device should be well supported by DD-WRT (see wiki + forum posts below)
- and partially supported by OpenWrt (Barrier Breaker (14.07) build).
While there is an OpenWrt build available, b43 currently lacks 11n support.
There is also support from Tomato Hyzoom
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing dd-wrt
Supported by dd-wrt as of = K26 build 17201 20110614
Please insert instructions here
Flashing Tomato
Supported from 2020.6.
Please insert instructions here
Pictures
- Netgear
- Embedded system/wireless router
- Embedded System Broadcom
- Embedded System BCM4718A1
- Broadcom
- Embedded System MIPS 74Kc
- Embedded System
- Embedded System BCM53115
- Manuf Foxconn
- DD-WRT Supported
- Tomato Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System BCM4331
- Embedded System IEEE 802.11a/n
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- English Documentation