Netgear WN1000RP

From TechInfoDepot
Jump to navigationJump to search
bgn (N150)
WiFi Booster for Mobile Devices
Homepage
Wikipedia
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Incompatible
Tomato any flavor
Incompatible
Platform
BrandModelRev
Netgear WN1000RP
FCC ID
Type
range extender
CPU1
Broadcom BCM5356C0
CPU1 Type
MIPS 74K V4.9
CPU1 Speed
300 MHz
Flash1 Chip
Macronix MX25L3206EM2I-12G
Flash1 Size
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br />
RAM1 Size
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Chip
Winbond W9412G6JH-5

802dot11 OUI: 00:8E:F2 (2 E, 5 W), E4:F4:C6 (3 E, 3 W)

Expansion IF types
none specified
Power
100-240 VAC ~ 50/60 Hz, 0.2 A
Connector type
NEMA 1-15P
Other

Default IP address: 192.168.1.250
the IP 192.168.1.250 is used by 25 additional devices
of which 6 are Netgear devices
Default login user: admin
Default login password: password
admin:password credentials used by 420 additional devices
of which 301 are Netgear devices

Manuf/OEM/ODM
Retail
FCC approval date 02 April 2012
UPC 606449083071
(UPC DB, On eBay)
ASIN B008GGB342 Flag of the United States.svg
Country of manuf China
Radio 1
Chip1
Broadcom BCM5356C0
Wireless interface OUI
00:8E:F2, E4:F4:C6
Antenna Connector Type
none specified
MIMO status
1x1:1
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 150 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

For a list of all currently documented Netgear device with specifications, see Netgear.

150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class

Overview

"2976406102" is silkscreened on the board in the FCC photos.

See also: Netgear and Delta Networks

Model: WN1000RP

JTAG-Serial Info

Serial

Boot log

boot log
 Decompressing...done
CFE version 5.60.130.20 @VERSION_TYPE@ dni 0.48 
 based on BBP 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Thu Dec 27 04:04:49 EST 2012 (ken.gao@dni-l-sw02)
Copyright (C) 2000-2008 Broadcom Corporation.
Init Arena
Init Devs.
Boot partition size = 131072(0x20000)
Found a 4MB ST compatible serial flash
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.60.130.20 
 @VERSION_TYPE@ dni 0.48
CPU type 0x19749: 300MHz
Tot mem: 16384 KBytes
CFE mem:    0x80700000 - 0x8079D4B0 (644272)
Data:       0x80733460 - 0x80736670 (12816)
BSS:        0x80736670 - 0x807374B0 (3648)
Heap:       0x807374B0 - 0x8079B4B0 (409600)
Stack:      0x8079B4B0 - 0x8079D4B0 (8192)
Text:       0x80700000 - 0x8073345C (210012)
------init2
Device eth0:  hwaddr E4-F4-C6-F3-B7-F5, ipaddr 192.168.1.250, mask 255.255.255.0
        gateway not set, nameserver not set
flag:1
led init
clear ret=0xf80
outen ret=0xf80
set ret=0xb80
0
Please press Ctrl-C to stop autoboot
xxx ui_cmd_go 
flag:1
Loader:raw Filesys:tftp Dev:eth0 File:: Options:(null)
Loading: Failed.
Could not load :: Timeout occured
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: .... 1662976 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
==flag m:0
CPU ProcId is: 0x00019749, options: 0x000021cd
Primary instruction cache 32kb, linesize 32 bytes (4 ways)
Primary data cache 32kb, linesize 32 bytes (4 ways)

Linux version 2.4.20 (ken.gao@dni-l-sw02) (gcc version 3.2.3 
with Broadcom modifications) #1 Thu Mar 28 10:38:41 EDT 2013
Found a 4MB ST compatible serial flash
Determined physical RAM map:
 memory: 01000000 @ 00000000 (usable)
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200
CPU: BCM53572 rev 1 at 300 MHz
Calibrating delay loop... 149.91 BogoMIPS
Memory: 14372k/16384k available (1383k kernel code, 2012k reserved, 108k data, 112k init, 0k highmem)
Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
Checking for 'wait' instruction...  unavailable.
POSIX conformance testing by UNIFIX
PCI: no core
PCI: Fixing up bus 0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0xb8000300 (irq = 8) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
pflash: found no supported devices
sflash: squash filesystem with lzma found at block 698

Creating 7 MTD partitions on "sflash":
0x00000000-0x00020000 : "boot"
0x00020000-0x003b0000 : "linux"
0x000ae9dc-0x003b0000 : "rootfs"
0x003b0000-0x003d0000 : "language_table"
0x003d0000-0x003e0000 : "pot"
0x003e0000-0x003f0000 : "nvram2"
0x003f0000-0x00400000 : "nvram"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 2048)
Linux IP multicast router 0.06 plus PIM-SM
ip_conntrack version 2.1 (128 buckets, 2048 max) - 368 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_time loading
BCM fast NAT: INIT
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
netlink_kernel_create ok
802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 112k freed
nvram2_get
nvram2_get over
Using /lib/modules/2.4.20/kernel/drivers/net/ctf/ctf.o
Using /lib/modules/2.4.20/kernel/drivers/net/emf/emf.o
Using /lib/modules/2.4.20/kernel/drivers/net/igs/igs.o
Using /lib/modules/2.4.20/kernel/drivers/net/et/et.o
insmod: bcm57xx.o: no module by that name found
Using /lib/modules/2.4.20/kernel/drivers/net/wl/wl.o
Hit enter to continue...wl0.1: No such device
The abbreviation of English is Eng!
Failed to fread data from /dev/mtd/3!
Didn't find the language table we need!
gui_region = English
region = English, download_region =  
 Update string table successfully, memory usage: 80KB.
The httpd server is running ...
led control running....
POT is Running...
The POT-(Get/Set) Demo is Running ...
WARNING: console log level set to 1
eth1: Operation not permitted
wlconf: PHYTYPE: 4
eth1: Invalid argument
eth1: Invalid argument
eth1: Invalid argument
eth1: Operation not supported
NET: Setting wl0.1 hw addr to E4:F4:C6:F3:B7:F5
NET: Error setting hw for wl0.1; returned -1
bcns:0
con_flag:0
info, udhcp client (v0.9.8) started
killall: wps_monitor: no process killed
killall: wps_ap: no process killed
killall: wps_enr: no process killed
ses: No such file or directory
ses_cl: No such file or directory
The attached devices demo is Running ...
mac is E4F4C6F3B7F5
Hit enter to continue...connect: Network is unreachable
The telnetenable is running ...
Hit enter to continue...killall: udhcpd: no process killed
/usr/share/udhcpc/default.script: line 260: can't create /proc/switch_phy: nonexistent directory
cat: /tmp/link_status: No such file or directory
info, udhcp server (v0.9.8) started
eth0:the count is 0
wl0.1 the count is 0
Hit enter to continue...ap_at_count:0
-------0---------
rm: cannot remove `/tmp/phy_connection': No such file or directory
++++0++++
bcns:0
con_flag:0
rm: cannot remove `/tmp/ping_result': No such file or directory
bcns:0
con_flag:0