Netgear WAX620
From TechInfoDepot
Jump to navigationJump to searchabgn+ac+ax (AX3600) | |
|---|---|
| AX3600 Dual Band PoE Multi-Gig WiFi 6 Access Point | |
 | |
| Homepage | |
| Wikipedia | |
| 3rd Party Firmware | |
| dd-wrt |
Status Unknown |
| OpenWrt | |
| Tomato any flavor |
Incompatible |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
Netgear WAX620 |
| FCC ID | |
| Type |
access point |
| CPU1 |
Qualcomm IPQ8072A |
| CPU1 Type |
ARM Cortex-A53 |
| CPU1 Speed |
1.689 GHz ( 4 cores ) 64-bit |
| Flash1 Chip |
Macronix MX30UF2G18AC |
| Flash1 Size |
512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (NAND) |
| RAM1 Size |
1 GiB 1,024 MiB <br />1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br /> (DDR4 600 MHz) |
| RAM1 Chip |
Brand? Model? |
| ETH chip1 |
Qualcomm IPQ8072A |
| ETH chip2 |
Qualcomm QCA8081 |
| Ethernet Port Count |
1-2.5GbE-LAN |
| Wired Standard |
IEEE 802.3i/3u/3ab/3bz |
|
802dot11 OUI: none specified | |
| Stock bootloader |
U-Boot |
| Expansion IF types |
none specified |
| PoE |
802.3at, 802.3af, standard |
| Power |
12 VDC, 2.5 A |
| Serial Port (UART) |
yes, 3.3, unpopulated, (115200 8N1) |
| Other | |
|
| |
| 3rd Party Firmware Support | |
| Radio 1 | |
| Chip1 |
Qualcomm QCN5024 |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
none specified |
| MIMO status |
4x4:4 |
| Wireless Standard |
IEEE 802.11b/g/n/ax |
| 802.11ax |
up to 1148 Mbps |
| 802.11n |
up to 600 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
| Radio 2 | |
| Chip1 |
Qualcomm QCN5054 |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
none specified |
| MIMO status |
4x4:4 |
| Wireless Standard |
IEEE 802.11a/n/ac/ax |
| 802.11ax |
up to 2402 Mbps |
| 802.11ac |
up to 1733 Mbps |
| 802.11n |
up to 600 Mbps |
| 802.11a |
up to 54 Mbps |
| WiFi Operating Frequency |
5 GHz |
For a list of all currently documented Qualcomm chipsets with specifications, see Qualcomm.
For a list of all currently documented Netgear device with specifications, see Netgear.
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
| Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
On the OpenWrt ToH (techdata entry)
OpenWrt Target: qualcommax
OpenWrt Subtarget: ipq807x
OpenWrt Package architecture: aarch64_cortex-a53
Support started version: ?
Current supported version: snapshot
OpenWrt Target: qualcommax
OpenWrt Subtarget: ipq807x
OpenWrt Package architecture: aarch64_cortex-a53
Support started version: ?
Current supported version: snapshot
Please insert instructions here
Categories:
- Netgear
- Embedded system/access point
- Embedded System Qualcomm
- Embedded System IPQ8072A
- Qualcomm
- Embedded System ARM
- Embedded System Cortex-A53
- Embedded System QCA8081
- OpenWrt Supported
- Embedded System QCN5024
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n/ax
- Embedded System QCN5054
- Embedded System IEEE 802.11a/n/ac/ax
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- Embedded System
- English Documentation
