Netgear MBR624GU
bg (G54) | |||||
---|---|---|---|---|---|
3G Broadband Wireless Router | |||||
Support | |||||
Wikipedia | |||||
3rd Party Firmware | |||||
dd-wrt |
Status Unknown | ||||
OpenWrt |
Status Unknown | ||||
Tomato any flavor |
Incompatible | ||||
Platform | |||||
Brand • Model • Rev |
Netgear MBR624GU | ||||
FCC ID | |||||
Type |
wireless router | ||||
CPU1 |
Conexant CX94610 | ||||
CPU1 Type |
ARM1026EJ-S | ||||
CPU1 Speed |
264 MHz | ||||
Flash1 Chip |
Macronix MX29LV640EBTI-70G | ||||
Flash1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> | ||||
RAM1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> | ||||
RAM1 Chip |
Winbond W9812G6IH-6 x 2 | ||||
ETH chip1 |
Conexant CX94610 | ||||
Switch |
Marvell 88E6060 | ||||
Ethernet Port Count |
4-100MbE-LAN | ||||
Wired Standard |
IEEE 802.3i/3u | ||||
Stock bootloader |
PP Boot v1.5 | ||||
Stock FW OS |
Linux 2.6.11.12 | ||||
Expansion IF types |
none specified | ||||
Power |
12 VDC, 1 A | ||||
Connector type |
barrel | ||||
Serial Port (UART) |
yes, internal, 6-pin header, unpopulated, 3.3V TTL, (38400 8N1), J2 | ||||
Additional chips | |||||
Other | |||||
Default SSID: NETGEAR-3G (2 addl. devices) | |||||
Manuf/OEM/ODM |
Foxconn U12L060 | ||||
Retail | |||||
FCC approval date | 24 June 2008 | ||||
(Est.) release date | 23 November 2008 | ||||
UPC |
606449061215 (UPC DB, On eBay) | ||||
ASIN | B001LYSVE6 | ||||
Country of manuf | China | ||||
Radio 1 | |||||
Chip1 |
Conexant CX94610 | ||||
Chip2 |
Conexant Model? | ||||
Wireless interface OUI |
00:22:3F, 00:24:B2, C0:3F:0E | ||||
Antenna Connector Type |
U.FL | ||||
Wireless Standard |
IEEE 802.11b/g | ||||
802.11g |
up to 54 Mbps | ||||
802.11b |
up to 11 Mbps | ||||
WiFi Operating Frequency |
2.4 GHz | ||||
|
For a list of all currently documented Conexant chipsets with specifications, see Conexant.
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
For a list of all currently documented Netgear device with specifications, see Netgear.
- • 54 Mbps - 2.4GHz 802.11g = G54 class
Overview
The RF chip may be a CX50221 or CX50321.
Manuf. by Foxconn / Hon Hai / Ambit, model U12L060T12.
Links of Interest
GPL Source to firmware version 6.01.30.64WW
JTAG-Serial Info
Serial
Info derived from
boot log |
---|
FSB v0.06 PLL w ln p08 zi Solos 461x PP boot v1.5 BootCode Version : 8.1.2 SDRAM size = 0x2000000 Processor clock speed 264.0MHz Entered console ... Nmrp request. cd Solos 461x Network boot v1.19 (00000000) (FLASH) MAC 00:24:B2:96:0F:F2 IP 192.168.1.1 SDRAM 0x02000000 bytes Phy reset line on GPIO 4 Boot from Ethernet Port FSB v0.06 PLL Normal mode p08 zi Solos 461x PP boot v1.5 BootCode Version : 8.1.2 SDRAM size = 0x2000000 Processor clock speed 264.0MHz Finding flashfs partition...kernel should be : length = 0 , checksum = FFFFFFFF. rootfs should be : length = 29D000 , checksum = CE91B39B. checking kernel... checking rootfs... done. Image 'image' is a Linux kernel Trying to load initrd...none found Calling Configure_NVS_FromFile. Passing Linux kernel command line -> 'console=ttyS0 root=31:2 mem=31M ro mtdparts=phys_mapped_flash:128k(boot),1024k(kernel),6656k(squashfs),64k(pot),64k(nvram),64k(bdata),64k(dpf),64k(res1),-(res2) rootfstype=squashfs' LZMA 4.05 00bX*******usb_init(1433):gpio_val=0 *******usb_init(1437):gpio_val=1 *******usb_init(1440):gpio_val=0 Remounting /dev ;this is silly :-) Loading Conexant BSP... CX50221 WIRELESS CHIPSET! Loading Wireless ... Reading True PDA ... sh: cannot create /proc/sys/net/ipv4/neigh/br0/base_reachable_time: Directory nonexistent Reading board data... WSC UUID: 0x40f9b5f35214928333d34743ce4e1bd4 insmod: /lib/modules/2.6.11.12: Unknown error 2 insmod: /lib/modules: Unknown error 2 insmod: cdc-acm.ko: no module by that name found [WiFi] disable antenna diversity OID[255],LEN [0] ****Disable 802.11d**** rm: cannot remove `/var/paed/wps_ap_lock.txt': Unknown error 2 Simple config inital steps killall: paed: no process killed Start WiFi Protected Setup / Simple Config device wlan0 is already a member of a bridge; can't enslave it to bridge br0. Unknown signal 11 ioctl down: Unknown error 19 maybe_fork(56) info, udhcp server (v0.9.8) started error, unable to parse 'option wins ' error, unable to parse 'option domain ' ###ApUnLock### Info: No FWPT default policies. SIOCSIFMTU: Unknown error 19 POT integrity check OK. POT time is up. Writing PID ::: 340 Do Auto mount... sh: /usr/bin/setsmbftpconf: not found queryusb executed. DEVICE PIN: 71996509 ******* MODE: Access Point ******* wwan executed. Please press Enter to activate this console. received link state trap: [108] received link state trap: [108] |
cat /proc/cpuinfo
/ # cat /proc/cpuinfo Processor : ARM1026EJ-Sid(wb)B rev 2 (v5l) BogoMIPS : 263.78 Features : swp half thumb fastmult edsp java CPU implementer : 0x41 CPU architecture: 5TEJ CPU variant : 0x0 CPU part : 0xa26 CPU revision : 2 Cache type : write-back Cache clean : cp15 c7 ops Cache lockdown : format C Cache format : Harvard I size : 16384 I assoc : 4 I line length : 32 I sets : 128 D size : 8192 D assoc : 4 D line length : 32 D sets : 64 Hardware : Solos CX4615 Revision : 0000 Serial : 00000024b2960ff2
Pictures
- Netgear
- Embedded system/wireless router
- Embedded System Conexant
- Embedded System CX94610
- Conexant
- Embedded System ARM1026EJ-S
- Embedded System
- Embedded System Marvell
- Embedded System 88E6060
- Marvell
- Manuf Foxconn
- Embedded System IEEE 802.11b/g
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- English Documentation