Netgear EX3800
From TechInfoDepot
Jump to navigationJump to searchabgn+ac (AC750) | |
---|---|
AC 750 WiFi Range Extender Essentials Edition | |
Support | |
Wikipedia | |
3rd Party Firmware | |
dd-wrt |
Status Unknown |
OpenWrt | |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
Netgear EX3800 |
FCC ID | |
Type |
range extender |
CPU1 | |
CPU1 Type |
MIPS 24KEc |
CPU1 Speed |
580 MHz 32-bit |
Flash1 Chip |
Macronix MX25l6405D |
Flash1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> |
RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
RAM1 Chip |
Brand? Model? |
ETH chip1 | |
Ethernet Port Count |
1-100MbE-LAN |
Wired Standard |
IEEE 802.3i/3u |
802dot11 OUI: none specified | |
Stock bootloader |
U-Boot |
Expansion IF types |
none specified |
Power |
100-240 VAC ~ 50/60 Hz, 0.1 A |
Serial Port (UART) |
yes, 4-pin header |
Flags: DFS | |
Other | |
| |
Manuf/OEM/ODM |
Foxconn U12H319 |
3rd Party Firmware Support | |
Retail | |
FCC approval date | 10 March 2016 |
Country of manuf | China |
Radio 1 | |
Chip1 | |
Wireless interface OUI |
none specified |
Antenna Connector Type |
U.FL |
MIMO status |
2x2:2 |
Wireless Standard |
IEEE 802.11b/g/n |
802.11n |
up to 300 Mbps |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
Radio 2 | |
Chip1 |
MediaTek MT7612EN |
Wireless interface OUI |
none specified |
Antenna Connector Type |
U.FL |
MIMO status |
1x1:1 |
Wireless Standard |
IEEE 802.11a/n/ac |
802.11ac |
up to 433 Mbps |
802.11n |
up to 150 Mbps |
802.11a |
up to 54 Mbps |
WiFi Operating Frequency |
5 GHz |
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented Netgear device with specifications, see Netgear.
Overview
This is an EX3700 with a mains output socket, with regional variants.
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 8MB FLASH / 64MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 8/64 warning for details. This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that you will not be able to install many packages, and that you might experience crashes due to OOM situations more or less often. See OpenWrt on 8/64 devices what you can do now. |
On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
OpenWrt Target: ramips
OpenWrt Subtarget: mt7620
OpenWrt Package architecture: mipsel_24kc
Support started version: 18.06.0
Current supported version: 23.05.5
Comment:
The Netgear EX3800 is essentially an EX3700 with a mains output socket.
On the OpenWrt Wiki
OpenWrt Target: ramips
OpenWrt Subtarget: mt7620
OpenWrt Package architecture: mipsel_24kc
Support started version: 18.06.0
Current supported version: 23.05.5
Comment:
The Netgear EX3800 is essentially an EX3700 with a mains output socket.
Please insert instructions here
Categories:
- Netgear
- Embedded system/range extender
- Embedded System MediaTek
- Embedded System MT7620A
- MediaTek
- Embedded System MIPS 24KEc
- Embedded System
- Manuf Foxconn
- OpenWrt Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System MT7612EN
- Embedded System IEEE 802.11a/n/ac
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- English Documentation