Neo Coolcam NIP-02
From TechInfoDepot
Jump to navigationJump to searchbgn (N150) | |
|---|---|
| camera | |
| 3rd Party Firmware | |
| dd-wrt |
Status Unknown |
| OpenWrt |
Status Unknown |
| Tomato any flavor |
Incompatible |
| Platform | |
| Brand • Model • Rev |
Neo Coolcam NIP-02 |
| FCC ID |
none specified |
| Type |
camera |
| CPU1 |
Ralink RT5350 |
| CPU1 Type |
MIPS 24KEc |
| CPU1 Speed |
360 MHz |
| Flash1 Chip |
Brand? Model? |
| Flash1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> |
| RAM1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
| RAM1 Chip |
Brand? Model? |
| ETH chip1 |
Ralink RT5350 |
| Ethernet Port Count |
1-100MbE-LAN |
| Wired Standard |
IEEE 802.3i/3u |
|
802dot11 OUI: none specified | |
| Expansion IF types |
none specified |
| Power |
? VDC, ? A |
| Connector type |
barrel |
|
| |
| Radio 1 | |
| Chip1 |
Ralink RT5350 |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
none specified |
| MIMO status |
1x1:1 |
| Wireless Standard |
IEEE 802.11b/g/n |
| 802.11n |
up to 150 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
- • 150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class
Overview
The difference between NIP-02 and NIP-09 is not clear. Apparently they use the same PCB.
- Manufacturer web site: [1]. Models:
- Neo Coolcam NIP-02 OGPW3A2
- Neo Coolcam NIP-09BHEW3A2Z3
- JTAG, pictures: [2]
- Detailed pictures: [3]
JTAG-Serial Info
Serial
Info derived from
| boot log |
|---|
Welcome to minicom 2.7
OPTIONS: I18n
Compiled on Jan 1 2014, 10:03:28.
Port /dev/ttyUSB0, 00:02:56
Press CTRL-A Z for help on special keys
U-Boot 1.1.3 (Dec 26 2012 - 17:31:39)
Board: Ralink APSoC DRAM: 32 MB
relocate_code Pointer at: 81fb4000
sysctl:40200300
spi_wait_nsec: 42
spi device id: c2 20 17 c2 20 (2017c220)
find flash: MX25L6405D
raspi_read: from:30000 len:1000
.raspi_read: from:30000 len:1000
.============================================
Ralink UBoot Version: 3.5.3.0
--------------------------------------------
ASIC 5350_MP (Port5<->None)
DRAM_CONF_FROM: Boot-Strapping
DRAM_TYPE: SDRAM
DRAM_SIZE: 256 Mbits
DRAM_WIDTH: 16 bits
DRAM_TOTAL_WIDTH: 16 bits
TOTAL_MEMORY_SIZE: 32 MBytes
Flash component: SPI Flash
Date:Dec 26 2012 Time:17:31:39
============================================
icache: sets:256, ways:4, linesz:32 ,total:32768
dcache: sets:128, ways:4, linesz:32 ,total:16384
##### The CPU freq = 360 MHZ ####
estimate memory size =32 Mbytes
Please choose the operation:
1: Load system code to SDRAM via TFTP.
2: Load system code then write to Flash via TFTP.
3: Boot system code via Flash (default).
4: Entr boot command line interface.
7: Load Boot Loader code then write to Flash via Serial.
9: Load Boot Loader code then write to Flash via TFTP.
You choosed 3
0
3: System Boot system code via Flash.
## Booting image at bc050000 ...
raspi_read: from:50000 len:40
. Image Name: Linux Kernel Image
Created: 2013-03-02 5:31:51 UTC
Image Type: MIPS Linux Kernel Image (lzma compressed)
Data Size: 4091840 Bytes = 3.9 MB
Load Address: 80000000
Entry Point: 802fd000
raspi_read: from:50040 len:3e6fc0
............................................................... Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 802fd000) ...
## Giving linux memsize in MB, 32
Starting kernel ...
LINUX started...
THIS IS ASIC
Linux version 2.6.21 (root@mailzxh-desktop) (gcc version 3.4.2) #697 Sat Mar 2 13:31:48 CST 2013
The CPU feqenuce set to 360 MHz
CPU revision is: 0001964c
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
Built 1 zonelists. Total pages: 8128
Kernel command line: console=ttyS1,57600n8 root=/dev/mtdblock5
Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 16kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
Cache parity protection disabled
cause = c080804c, status = 11000000
PID hash table entries: 128 (order: 7, 512 bytes)
calculating r4koff... 00057e40(360000)
CPU frequency 360.00 MHz
Using 180.000 MHz high precision timer.
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 29204k/32768k available (2653k kernel code, 3564k reserved, 402k data, 124k init, 0k highmem)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
Time: MIPS clocksource has been installed.
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
deice id : c2 20 17 c2 20 (2017c220)
MX25L6405D(c2 2017c220) (8192 Kbytes)
mtd .name = raspi, .size = 0x00800000 (8M) .erasesize = 0x00010000 (64K) .numeraseregions = 0
Creating 8 MTD partitions on "raspi":
0x00000000-0x00800000 : "ALL"
0x00000000-0x00030000 : "Bootloader"
0x00030000-0x00040000 : "Config"
0x00040000-0x00050000 : "Factory"
0x00050000-0x00150000 : "Kernel"
0x00150000-0x00480000 : "RootFS"
0x00480000-0x00780000 : "sys"
0x00780000-0x00800000 : "param"
Load Ralink DFS Timer Module
RT3xxx EHCI/OHCI init.
squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
squashfs: LZMA suppport for slax.org by jro
JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
io scheduler noop registered (default)
gpiomode:404055 addr:b0000000 by zqh
gpiomode:404059 by zqh1
Ralink gpio driver initialized
Enable Ralink GDMA Controller Module
GDMA IP Version=2
i2cdrv_major = 218
HDLC line discipline: version $Revision: 1.1.1.1 $, maxframe=4096
N_HDLC line discipline registered.
Ralink APSoC Hardware Watchdog Timer
Serial: 8250/16550 driver $Revision: 1.7 $ 2 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0xb0000500 (irq = 37) is a 16550A
serial8250: ttyS1 at I/O 0xb0000c00 (irq = 12) is a 16550A
loop: loaded (max 8 devices)
rdm_major = 254
Ralink APSoC Ethernet Driver Initilization. v2.1 256 rx/tx descriptors allocated, mtu = 1500!
NAPI enable, weight = 32, Tx Ring = 256, Rx Ring = 256
MAC_ADRH -- : 0x0000000a
MAC_ADRL -- : 0xeb1540ae
PROC INIT OK!
PPP generic driver version 2.4.2
PPP BSD Compression module registered
NET: Registered protocol family 24
PPPoL2TP kernel driver, V0.17
PPTP driver version 0.8.1
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Linux video capture interface: v2.00
=== SONiX UVC Like Driver(H264) Initial ===
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0_SONiX_v2.6.24.03)
block2mtd: version $Revision: 1.1.1.1 $
usbmon: debugfs is not available
rt3xxx-ehci rt3xxx-ehci: Ralink EHCI Host Controller
rt3xxx-ehci rt3xxx-ehci: new USB bus registered, assigned bus number 1
rt3xxx-ehci rt3xxx-ehci: irq 18, io mem 0x101c0000
rt3xxx-ehci rt3xxx-ehci: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
rt3xxx-ohci rt3xxx-ohci: RT3xxx OHCI Controller
rt3xxx-ohci rt3xxx-ohci: new USB bus registered, assigned bus number 2
rt3xxx-ohci rt3xxx-ohci: irq 18, io mem 0x101c1000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usb 1-1: new high speed USB device using rt3xxx-ehci and address 2
usb 1-1: configuration #1 chosen from 1 choice
uvcvideo: Found UVC 1.00 device USB 2.0 PC Camera (058f:3861)
uvcvideo: Failed to query (1) UVC control 1 (unit 4) : -145 (exp. 4).
uvcvideo: Failed to query (1) UVC control 1 (unit 3) : -32 (exp. 4).
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
Advanced Linux Sound Architecture Driver Version 1.0.14rc3 (Wed Mar 14 07:25:50 2007 UTC).
ALSA device list:
No soundcards found.
nf_conntrack version 0.5.0 (256 buckets, 131072 max)
ip_tables: (C) 2000-2006 Netfilter Core Team, Type=Restricted Cone
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 124k freed
init started: BusyBox v1.12.1 (2013-03-02 13:26:40 CST)
starting pid 16, tty '': '/etc_ro/rcS'
Algorithmics/MIPS FPU Emulator v1.5
devpts: called with bogus options
drivers/usb/core/inode.c: usbfs: unrecognised mount option "defaults" or missing value
drivers/usb/core/inode.c: usbfs: mount parameter error:
Welcome to
_______ _______ ___ __ ____ _ _ ___
| ___ \| __ || | |__|| \ | || | / /
| |___| || |__| || |__ __ | \| || |/ /
| _ /| _ || || || |\ || \
|__| \__\|__| |__||______||__||_| \____||_|\___\
=System Architecture Department=
gpio open
ralink gpio release by zqh
clr gpio
starting pid 32, tty '/dev/ttyS1': '/bin/sh'
BusyBox v1.12.1 (2013-03-02 13:26:40 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
# Started WatchDog Timer.
zqh socket fd=3
zqh bind(6666) address successful!
zqh socket fd=3
zqh bind(6666) address successful!
InitSystemParam 0
=========================read system param from file==================================
mac:00:6E:06:1D:2C:8B 30
wifimac:00:6E:06:1D:2C:8C 30
wifimac:00:6E:06:1D:2C:8C
ie param ppid 36
ie param ppid 39
daemon:===== wifi.c, line 311, WifiDriversInit(): insmod From kernal
rt2860v2_sta: module license 'unspecified' taints kernel.
=== pAd = c0095000, size = 534784 ===
<-- RTMPAllocAdapterBlock, Status=0
daemon:===== wifi.c, line 316, WifiDriversInit(): [insmod /lib/modules/2.6.21/kernel/drivers/netRX DESC a1e28000 size8
/wireless/rt2860v2_sta/rt2860v2_sta.ko mac=00:6E<-- RTMPAllocTxRxRingMemory, Status=0
:06:1D:2C:8C] OK
Key2Str is Invalid key length(0) or Type(1)
Key3Str is Invalid key length(0) or Type(1)
Key4Str is Invalid key length(0) or Type(1)
1. Phy Mode = 9
2. Phy Mode = 9
3. Phy Mode = 9
MCS Set = ff 00 00 00 01
<==== rt28xx_init, Status=0
0x1300 = 00064300
EthMacInit2
EthMacInit3
phy_tx_ring = 0x01f8d000, tx_ring = 0xa1f8d000
phy_rx_ring0 = 0x01f8e000, rx_ring0 = 0xa1f8e000
MAC_ADRH -- : 0x0000006e
MAC_ADRL -- : 0x061d2c8b
RT305x_ESW: Link Status Changed
EthMacInit4
switch reg write offset=14, value=5555
switch reg write offset=40, value=1001
switch reg write offset=44, value=1001
switch reg write offset=48, value=1001
switch reg write offset=4c, value=1
switch reg write offset=50, value=2001
switch reg write offset=70, value=ffffffff
switch reg write offset=98, value=7f7f
switch reg write offset=e4, value=7f
done.
EthMacInit5
EthMacInit5
switch reg write offset=14, value=5555
switch reg write offset=40, value=1001
switch reg write offset=44, value=1001
switch reg write offset=48, value=1001
switch reg write offset=4c, value=1
switch reg write offset=50, value=2001
switch reg write offset=70, value=ffffffff
switch reg write offset=98, value=7f7f
switch reg write offset=e4, value=7f
done.
eth is start
=====InitNetDrivers=======
daemon:===== network.c, line 383, DnsConfig(): Save to File, 1 = [8.8.8.8]
daemon:===== network.c, line 384, DnsConfig(): Save to File, 2 = [192.168.1.1]
pid 29
NetThreadProc
netstatsem post
=======network change=======
netok -1 link 0
net is work on wifi
wifistart1
route: ioctl 0x890c failed: No such process
wifistart2
wifistart3
wifistart4
wifistart5
--------------SaveSystemParam----------
bparam.stNetParam.szIpAddr = 192.168.1.9
link:0 status:0
netstatsem post end
start app update thread
start sys update thread
=======mac=======
00-6e-06-1d-2c-8b-
zqh socket fd=7
zqh bind(9123) address successful!
ipc param ppid 33
update socket init
update Socket proc is start
==== sysparam.c , line 308, InitSystemParam :read system.ini
user1: , pwd1:
user2: , pwd2:
user3: admin, pwd3:
zqh socket fd=4
zqh bind(8832) address successful!
zqh socket fd=5
zqh bind(6666) address successful!i2s enable:1
zqh socket fd=work in slave
audiohw_preinit by zqh
12Mhz
9
zqh bind(8813gpio open
) address successful!
zqh socket fd=10
zqh bind(8822) address successful!
zqh socket fd=11
zqh bind(8832) address successful!
ie param ppid 124
mac:00:6E:06:1D:2C:8B 30
wifimac:00:6E:06:1D:2C:8C 30
wifimac:00:6E:06:1D:2C:8C
sys_ver 5102008e
write date ok
curtime 1396908090
ie param ppid 124
fp == null
==== encrypt.c ralink gpio release by zqh
, line 1154clr gpio
, CheckChipOk :es8388 is ok
audio capture:128
audio play:129
=======mac=======
00-6e-06-1d-2c-8b-
============autio init=========
==== stream.c , line 391, VideoEnable :---VideoEnable(bysize=0)---Initing...
length: 921600 offset: 0
Buffer mapped at address 0x2af83000.
length: 921600 offset: 921600
Buffer mapped at address 0x2b064000.
length: 921600 offset: 1843200
Buffer mapped at address 0x2b145000.
length: 921600 offset: 2764800
Buffer mapped at address 0x2b226000.
video_enable
video enable
video enable ok
init capture ok
init thread ok
capture video:137
Socket proc is start pid=141
send live jpeg:142
send live jpeg:143
send live jpeg:144
send live jpeg:145
send video jpeg:146
send video jpeg:147
send video jpeg:148
send video jpeg:149
send live audio:150
send live audio:151
send live audio:152
send live audio:153
AudioPlayProc:154
send record file:155
send record file:156
send record file:157
send record file:158
upnpc : miniupnpc library test client. (c) 2006-2010 Thomas Bernard
Go to http://miniupnp.free.fr/ or http://miniupnp.tuxgpio open
family.org/
for more information.
start gpio check
start motion check
start alarm proc
==== dns.c , line 107, DnsSendAlarmProc :start alarm to DNS server...
web pid:176
init thread ok
========ipaddr 192.168.1.9===========
========port 81===========
FrameRate proc:177
p2p init proc
P2P cmd thread is start...
P2P media thread is start...
P2P play thread is start...
==== moto-new.c , line 4418, InitMoto :Init, alarminhappen = 0
==== moto-new.c , line 1318, ReadVertSteps :Read maxverttime = 100
==== moto-new.c , line 1372, GetVertTime :get vertime 0
==== moto-new.c , line 1026, ReadLevelSteps :Read maxleveltime = 1100
==== moto-new.c , line 1053, GetLevelTime :get levelime 717
P2P media thread is start...
P2P cmd thread is start...
check video stream 1 pbuf:/videostream.cgi?rate=11
video push socket 18 sit 0
==== dns.c , line 760, FactoryRegisterProc :FactoryRegisterProc
========version:20804===========
==== moto-new.c , line 4438, MotoCentProc :=====moto is start=====
==== moto-new.c , line 4439, MotoCentProc :moto start, read moto sit
==== moto-new.c , line 4440, MotoCentProc :presend = 1, speed = 10
start run ddns
iRet 0
bFlagInternet 1
bFlagHostResolved 1
bFlagServerHello 1
NAT_Type 2
PPPP_Share_Bandwidth(1) iRet 0
P2P init =1
No IGD UPnP Device found on the network !
iRet 0 upnp:/system/system/bin/upnpc-static -a
iRet 0
route mac is null
route mac is null
==== network.c , line 2897, Networkhread :Create Thread WfiCheckProc
==== network.c , line 2832, WfiCheckProc :===wifi check status===
==== capture.c , line 366, SetBrightness :size iRet=0, value=0
==== video.c , line 680, VideoParamInit :--------------VideoParamInit----------
set mirr flip=5
==== video.c , line 744, VideoParamInit :set mirr flip, Param = 5, Saturation = 5
write 5020
get main thread param
==== main.c , line 441, main :SystemVerion==================[ 81.2.0.142 ]==============
write 5020
--------------SaveSystemParam----------
bparam.stNetParam.szIpAddr = 192.168.1.9
sys_ver 5102008e
def key proc
get main thread param
==== date.c , line 141, NtpThreadProc :Call GetNtpTime
==== date.c , line 90, GetNtpTime :bparam.stDTimeParam.byIsNTPServer = 1
==== date.c , line 91, GetNtpTime :bparam.stDTimeParam.szNtpSvr = time.nist.gov
==== date.c , line 96, GetNtpTime :start connect timer server...=time.nist.gov
==== ntp.c , line 86, get_udp_arrival_local_timestamp:local time=>Mon Apr 7 22:02:51 2014
==== ntp.c , line 118, get_new_time :server time=>Mon Apr 7 22:04:31 2014
==== ntp.c , line 130, set_local_time :Set NEW Time
==== date.c , line 98, GetNtpTime :NTP=0
write date ok
|
