NanoPi Fire 3
| Single-board computer | |
| Homepage | |
|---|---|
| 3rd Party Firmware | |
| dd-wrt |
Status Unknown |
| OpenWrt |
Status Unknown |
| Tomato any flavor |
Incompatible |
| Platform | |
| Brand • Model • Rev |
FriendlyARM NanoPi Fire 3 |
| Type |
single-board computer |
| CPU1 |
Samsung S5P6818 |
| CPU1 Type |
ARM Cortex-A53 |
| CPU1 Speed |
1.4 GHz ( 8 cores ) |
| Flash1 Chip |
Brand? Model? |
| Flash1 Size |
0 MiB0 B <br />0 Kib <br />0 KiB <br />0 Mib <br />0 GiB <br /> |
| RAM1 Size |
1 GiB 1,024 MiB <br />1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br /> (DDR3 SDRAM) |
| RAM1 Chip |
Samsung KB4G1646D-BCK0 x 2 |
| ETH chip1 |
Samsung S5P6818 |
| ETH chip2 |
Realtek RTL8211E |
| Ethernet Port Count |
1-1GbE-LAN |
| Wired Standard |
IEEE 802.3i/3u/3ab |
|
| |
| Stock bootloader |
U-Boot 2016.01 |
| Stock FW OS |
Linux 4.4.172 Ubuntu 16.04 |
| Expansion IF types |
USB 2.0, MicroSD Card slot |
| USB ports |
1 |
| SD/MMC Slots |
1 |
| USB Hub Compatible |
Untested |
| Power |
5 VDC, 2 A |
| Connector type |
USB Female Micro-B |
| Serial Port (UART) |
yes, 4-pin header, populated, 3.3V TTL, (115200 8N1), |
|
Flags: MicroSD Card slot, Micro HDMI 1.4a, DVP Camera Interface, RTC w/ battery backup, GPIO, I2C, SPI | |
|
Additional chips | |
| Other | |
|
Default IP address: acquired via DHCP | |
| Retail | |
| (Est.) release date | November 2017 |
| (Est.) initial retail price (in USD): | $35 |
| Country of manuf | China |
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
For a list of all currently documented Samsung chipsets with specifications, see Samsung.
For a list of all currently documented FriendlyARM device with specifications, see FriendlyARM.
Overview
Specifications
- CPU: Samsung S5P6618 (Nexell) @1.4GHz
- SoC: Octa-core ARM (Cortex-A53)
- Memory: 1GB (DDR3) SDRAM (2x Samsung K4B4G1646D)
- Onboard Storage: TF card (64GB)/MMC card slot
- Ports: 1x GbE LAN, 1x USB 2.0
