NXP LS1043ARDB
From TechInfoDepot
Jump to navigationJump to search| Single Board Computer | |
 | |
| Homepage | |
|---|---|
| 3rd Party Firmware | |
| dd-wrt |
Status Unknown |
| OpenWrt | |
| Tomato any flavor |
Incompatible |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
NXP LS1043ARDB |
| Type |
single-board computer |
| CPU1 |
NXP LS1043A |
| CPU1 Type |
ARMv8 Cortex-A53 |
| CPU1 Speed |
1.6 GHz ( 4 cores ) |
| Flash1 Chip |
Brand? Model? |
| Flash1 Size |
512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (NAND) |
| Flash2 Size |
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (NOR) |
| RAM1 Size |
2 GiB 2,048 MiB <br />2,147,483,648 B <br />16,777,216 Kib <br />2,097,152 KiB <br />16,384 Mib <br /> (DDR4) |
| RAM1 Chip |
Brand? Model? |
| ETH chip1 |
NXP LS1043A |
| Switch |
NXP LS1043A |
| Ethernet Port Count |
4-1GbE-LAN |
| Wired Standard |
IEEE 802.3i/3u/3ab |
|
| |
| Stock bootloader |
U-Boot |
| Expansion IF types |
PCIe, Mini PCIe, USB 2.0, USB 3.0 |
| Mini PCIe slots |
2 |
| USB ports |
3 |
| USB Hub Compatible |
Untested |
| Serial Port (UART) |
yes, (115200 8N1) |
| JTAG Port |
yes |
| Other | |
|
| |
| 3rd Party Firmware Support | |
For a list of all currently documented NXP (Freescale) SoC's with specifications, see NXP.
For a list of all currently documented NXP device with specifications, see NXP.
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
On the OpenWrt ToH (techdata entry)
OpenWrt Target: layerscape
OpenWrt Subtarget: armv8_64b
OpenWrt Package architecture: aarch64_generic
Support started version: 17.01.0
Current supported version: 23.05.5
OpenWrt Target: layerscape
OpenWrt Subtarget: armv8_64b
OpenWrt Package architecture: aarch64_generic
Support started version: 17.01.0
Current supported version: 23.05.5
Please insert instructions here
