NXP FRWY-LS1046A
From TechInfoDepot
Jump to navigationJump to searchSingle Board Computer | |
Homepage | |
---|---|
3rd Party Firmware | |
dd-wrt |
Status Unknown |
OpenWrt | |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
NXP FRWY-LS1046A |
Type |
single-board computer |
CPU1 |
Freescale (NXP) LS1046A |
CPU1 Type |
ARM Cortex-A72 |
CPU1 Speed |
1.6 GHz ( 4 cores ) |
Flash1 Chip |
Brand? Model? |
Flash1 Size |
512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (NAND) |
Flash2 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
RAM1 Size |
4 GiB 4,096 MiB <br />4,294,967,296 B <br />33,554,432 Kib <br />4,194,304 KiB <br />32,768 Mib <br /> |
RAM1 Chip |
Brand? Model? |
ETH chip1 |
Freescale (NXP) LS1046A |
Switch |
Freescale (NXP) LS1046A |
Ethernet Port Count |
4-1GbE-LAN |
Wired Standard |
IEEE 802.3i/3u/3ab |
| |
Stock bootloader |
U-Boot |
Expansion IF types |
M.2 Type-E NGFF slot, USB 3.0 |
USB ports |
2 |
M.2 Slots |
2 |
USB Hub Compatible |
Untested |
Power |
12 VDC, 5 A |
Connector type |
barrel |
Serial Port (UART) |
yes, 5, (115200 8N1) |
JTAG Port |
yes |
Other | |
| |
3rd Party Firmware Support |
For a list of all currently documented Freescale (NXP) SoC's with specifications, see Freescale.
For a list of all currently documented NXP device with specifications, see NXP.
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
On the OpenWrt ToH (techdata entry)
OpenWrt Target: layerscape
OpenWrt Subtarget: armv8_64b
OpenWrt Package architecture: aarch64_generic
Support started version: 21.02.0
Current supported version: 23.05.5
OpenWrt Target: layerscape
OpenWrt Subtarget: armv8_64b
OpenWrt Package architecture: aarch64_generic
Support started version: 21.02.0
Current supported version: 23.05.5
Please insert instructions here