NXP FRDM-LS1012A
From TechInfoDepot
Jump to navigationJump to searchSingle Board Computer | |
3rd Party Firmware | |
---|---|
dd-wrt |
Status Unknown |
OpenWrt | |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
NXP FRDM-LS1012A |
Type |
single-board computer |
CPU1 |
NXP LS1012A |
CPU1 Speed |
800 MHz |
Flash1 Chip |
Brand? Model? |
Flash1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (QSPI NOR) |
RAM1 Size |
512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (DDR3) |
RAM1 Chip |
Brand? Model? |
ETH chip1 |
NXP LS1012A |
Ethernet Port Count |
2-1GbE-LAN |
Wired Standard |
IEEE 802.3i/3u/3ab |
| |
Stock bootloader |
U-Boot |
Expansion IF types |
USB 3.0 |
USB ports |
1 |
USB Hub Compatible |
Untested |
Power |
5 VDC, 2 A |
Connector type |
USB Female Micro-B |
Other | |
| |
3rd Party Firmware Support | |
Retail | |
Availability | End of Life |
End of Life date | 2024 |
For a list of all currently documented NXP (Freescale) SoC's with specifications, see NXP.
For a list of all currently documented NXP device with specifications, see NXP.
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
On the OpenWrt ToH (techdata entry)
OpenWrt Target: layerscape
OpenWrt Subtarget: armv8_64b
OpenWrt Package architecture: aarch64_generic
Support started version: 21.02.0
Current supported version: 23.05.5
OpenWrt Target: layerscape
OpenWrt Subtarget: armv8_64b
OpenWrt Package architecture: aarch64_generic
Support started version: 21.02.0
Current supported version: 23.05.5
Please insert instructions here