NEC Aterm WG600HP
From TechInfoDepot
Jump to navigationJump to searchabgn | |
|---|---|
| wireless router | |
| Homepage | |
| 3rd Party Firmware | |
| dd-wrt |
Status Unknown |
| OpenWrt | |
| Tomato any flavor |
Incompatible |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
NEC Aterm WG600HP |
| FCC ID |
none specified |
| Type |
wireless router |
| CPU1 | |
| CPU1 Type |
MIPS 74Kc |
| CPU1 Speed |
not specified |
| Flash1 Chip |
Brand? Model? |
| Flash1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> |
| RAM1 Size |
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> |
| RAM1 Chip |
Brand? Model? |
| ETH chip1 | |
| Switch |
Atheros AR8327 |
| Ethernet Port Count |
1-1GbE-WAN 4-1GbE-LAN |
| Wired Standard |
IEEE 802.3i/3u/3ab |
|
802dot11 OUI: none specified | |
| Stock bootloader |
U-Boot |
| Expansion IF types |
USB 2.0 |
| USB ports |
1 |
| USB Hub Compatible |
Untested |
| Power |
12 VDC, 1.5 A |
| Connector type |
barrel |
| Serial Port (UART) |
yes, 3.3, 9600 / 8N1 |
| Other | |
|
| |
| 3rd Party Firmware Support | |
| Radio 1 | |
| Chip1 | |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
none specified |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11b/g/n |
| 802.11n |
up to 300 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
| Radio 2 | |
| Chip1 |
Atheros AR9382 |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
none specified |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11a/n |
| 802.11n |
up to 300 Mbps |
| 802.11a |
up to 54 Mbps |
| WiFi Operating Frequency |
5 GHz |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented NEC device with specifications, see NEC.
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
| Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
| This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 8MB FLASH / 64MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 8/64 warning for details. This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that you will not be able to install many packages, and that you might experience crashes due to OOM situations more or less often. See OpenWrt on 8/64 devices what you can do now. |
On the OpenWrt ToH (techdata entry)
OpenWrt Target: ath79
OpenWrt Subtarget: tiny
OpenWrt Package architecture: mips_24kc
Support started version: ?
Current supported version: snapshot
Comment:
USB NEC uPD720114
OpenWrt Target: ath79
OpenWrt Subtarget: tiny
OpenWrt Package architecture: mips_24kc
Support started version: ?
Current supported version: snapshot
Comment:
USB NEC uPD720114
Please insert instructions here
Categories:
- NEC
- Embedded system/wireless router
- Embedded System Atheros
- Embedded System AR9344
- Atheros
- Embedded System MIPS 74Kc
- Embedded System
- Embedded System AR8327
- OpenWrt Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System AR9382
- Embedded System IEEE 802.11a/n
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- English Documentation
- New Entry
