NAG SNR-CPE-W4N (rev.M)

From TechInfoDepot
Jump to navigationJump to search
multiple revisions of this device, use caution
bgn (N300)
N300 Wireless Router
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Status Unknown
Tomato any flavor
Incompatible
Gargoyle
Status Unknown
Platform
BrandModelRev
NAG SNR-CPE-W4N (rev.M)
FCC ID
none specified
Board ID
BL-RM7620N-V1.2
Type
wireless router, CPE
CPU1
CPU1 Type
MIPS 24KEc
CPU1 Speed
580 MHz
Flash1 Chip
Brand? Model?
Flash1 Size
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (SPI)
RAM1 Size
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br />
RAM1 Chip
ESMT M13S5121632A-5T
ETH chip1
Switch
Ethernet Port Count
1-100MbE-WAN
4-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: F8:F0:82 (4 E, 4 W)
Ethernet OUI: F8:F0:82 (4 E, 4 W)

Stock bootloader
U-Boot
Stock FW OS
Linux 3.4.113 Wive-NG-MT
Expansion IF types
none specified
Power
12 VDC, 1 A
Connector type
barrel
Serial Port (UART)
yes, 4-pin header, J2
Other

Default SSID: Wive-NG-MT (2 addl. devices)
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1310 additional devices
of which 4 are NAG devices
Default login user: Admin
Default login password: Admin
Admin:Admin credentials used by 16 additional devices
of which 4 are NAG devices

Manuf/OEM/ODM
LB-LINK BL-RM7620N V1.2
3rd Party Firmware Support
Retail
(Est.) release date May 2017
Country of manuf China
Radio 1
Chip1
Wireless interface OUI
F8:F0:82
Antenna Connector Type
none specified
MIMO status
2x2:2
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 300 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz
 CPU1 brandRadio1 chip1 brandRadio1 chip2 brand
NAG SNR-CPE-MD1MediaTekMediaTek
NAG SNR-CPE-ME1MediaTekMediaTek
NAG SNR-CPE-W4NRalinkRalink
NAG SNR-CPE-W4N (rev.M)MediaTekMediaTek
NAG SNR-CPE-W4N-3GRalinkRalink

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.

300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Overview

Future support available with Wive-NG (sfstudio) • (Blog | List)

Wive-NG-MT on Wi-CAT (RU)

The bootloader used is assumed to be U-Boot.

Default SSIDs Wive-NG-MT.

Links of Interest

Forum threads

See also

List of Wive-ng firmware supported devices