Mocet IG7500

bgn (N300)
wireless router,analog phone gateway
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Status Unknown
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	Mocet IG7500
FCC ID	none specified
Type	wireless router, analog phone gateway
CPU1	Brand? Model?
Flash1 Chip	Brand? Model?
Flash1 Size	? MiB
RAM1 Size	? MiB
RAM1 Chip	Brand? Model?
ETH chip1	Brand? Model?
Switch	IC+ IP175D
Ethernet Port Count	1-WAN 4-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: none specified
Expansion IF types	USB 2.0, microSD, Mini PCIe
Mini PCIe slots	1
USB ports	2
SD/MMC Slots	1
USB Hub Compatible	Untested
Power	12 VDC, 1.5 A
Connector type	barrel
Other
Default login user: admin1234 Default login password: 123456 admin1234:123456 credentials used by 1 additional devices of which 0 are Mocet devices
Manuf/OEM/ODM	Tecom
Radio 1
Radio1 module	Wistron NeWeb DNXA-97
Radio1 module IF	Mini PCIe (half)
Chip1	Atheros AR9287
Wireless interface OUI	none specified
Antenna Connector Type	none specified
MIMO status	2x2:2
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented IC+ chipsets with specifications, see IC+.

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Overview

"613-181023R R02" is silkscreened on the board in the FCC photos. "48DNXA04.0GA" and "2010/03/17" is silkscreened on the wireless module (Wistron NeWeb manuf., aka Unex DNXA-97).

Possible 00:19:15 OUI (on the FCC sample label, possibly ethernet only) or 90:A4:DE (FCC manual, probably WLAN only)

Default credentials are from the FCC submitted manual. The manual specifies the default IP as 192.168.1.1 but shows an IP of 172.17.215.72 in the sample password prompt. The default SSID pattern may be IG7500_XXXXX.

Gigabit WAN, 10/100 LAN?