MikroTik Routerboard RB-2xx
From TechInfoDepot
Jump to navigationJump to searchsingle-board computer | |
WikiDevi.wi-cat.ru | |
---|---|
3rd Party Firmware | |
dd-wrt | |
OpenWrt |
Incompatible |
Tomato any flavor |
Incompatible |
Gargoyle |
Incompatible |
Platform | |
Brand • Model • Rev |
MikroTik Routerboard RB-2xx |
Type |
single-board computer |
CPU1 |
AMD Geode SC1100 |
CPU1 Type |
x86-64 x86 |
CPU1 Speed |
266 MHz 32-bit |
Flash1 Chip |
Brand? Model? |
Flash1 Size |
2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> |
RAM1 Size |
256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (SO-DIMM) |
RAM1 Chip |
Brand? Model? |
ETH chip1 |
Brand? Model? |
Switch |
National Semiconductor DP83816 |
Ethernet Port Count |
2-100MbE-LAN |
Wired Standard |
IEEE 802.3/3u |
| |
Expansion IF types |
PCI, USB 1.1, cf-card, IDE-port |
Mini PCI slots |
1 |
USB ports |
1 |
Compact Flash Slots |
1 |
IDE Ports |
1 |
USB Hub Compatible |
Untested |
PoE |
802.3af, standard |
Power |
20-56 VDC, ? A |
Flags: ide port, hardware watchdog, temp. sensor | |
Other | |
| |
3rd Party Firmware Support |
AMD Geode not currently documented.
For a list of all currently documented NSC (Fairchild) SoC's with specifications, see NSC.
For a list of all currently documented MikroTik device with specifications, see MikroTik.
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing dd-wrt
Supported by dd-wrt as of = x86 version, write image via physdiskwrite to cf-card
Please insert instructions here