MikroTik RouterBOARD RB952Ui-5ac2nD (hAP ac lite)
From TechInfoDepot
Jump to navigationJump to searchabgn+ac (AC1200) | |
|---|---|
| WiFi AP | |
.png) | |
| Homepage | |
| 3rd Party Firmware | |
| dd-wrt |
Status Unknown |
| OpenWrt | |
| Tomato any flavor |
Incompatible |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
MikroTik RouterBOARD RB952Ui-5ac2nD (hAP ac lite) |
| FCC ID | |
| Type |
access point |
| CPU1 |
Qualcomm Atheros QCA9531 |
| CPU1 Type |
MIPS 24Kc |
| CPU1 Speed |
650 MHz |
| Flash1 Chip |
Brand? Model? |
| Flash1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
| RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
| RAM1 Chip |
Brand? Model? |
| ETH chip1 |
Qualcomm Atheros QCA9531 |
| Switch |
Qualcomm Atheros QCA9531 |
| Ethernet Port Count |
1-100MbE-WAN 4-100MbE-LAN |
| Wired Standard |
IEEE 802.3i/3u |
|
802dot11 OUI: none specified | |
| Stock bootloader |
RouterBOOT |
| Expansion IF types |
USB 2.0 |
| USB ports |
1 |
| USB Hub Compatible |
Untested |
| PoE |
Passive |
| Power |
10-28 VDC, ? A |
| Connector type |
barrel |
| Other | |
|
| |
| 3rd Party Firmware Support | |
| Radio 1 | |
| Chip1 |
Qualcomm Atheros QCA9531 |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
none specified |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11b/g/n |
| 802.11n |
up to 300 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
| Radio 2 | |
| Chip1 |
Qualcomm Atheros QCA9887 |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
none specified |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11a/n/ac |
| 802.11ac |
up to 867 Mbps |
| 802.11n |
up to 300 Mbps |
| 802.11a |
up to 54 Mbps |
| WiFi Operating Frequency |
5 GHz |
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.
For a list of all currently documented MikroTik device with specifications, see MikroTik.
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 8MB FLASH / 64MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 8/64 warning for details. This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that you will not be able to install many packages, and that you might experience crashes due to OOM situations more or less often. See OpenWrt on 8/64 devices what you can do now. |
On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
OpenWrt Target: ar71xx-ath79
OpenWrt Subtarget: mikrotik
OpenWrt Package architecture: mips_24kc
Support started version: 18.06.0
Current supported version: 23.05.5
On the OpenWrt Wiki
OpenWrt Target: ar71xx-ath79
OpenWrt Subtarget: mikrotik
OpenWrt Package architecture: mips_24kc
Support started version: 18.06.0
Current supported version: 23.05.5
Please insert instructions here
Categories:
- MikroTik
- Embedded system/access point
- Embedded System Qualcomm Atheros
- Embedded System QCA9531
- Qualcomm Atheros
- Embedded System MIPS 24Kc
- Embedded System
- OpenWrt Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System QCA9887
- Embedded System IEEE 802.11a/n/ac
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- English Documentation
