MikroTik/SFP module compatibility table
From TechInfoDepot
< MikroTik
Jump to navigationJump to searchCompatibility between MikroTik made SFP modules and MikroTik RouterBOARD hardware
Model | S-GPON -ONU |
S-RJ01 | S+RJ10 | S-85D LC05D |
S-31D LC20D |
S-3553 LC20D |
S+85D LC03D |
S+31D LC10D |
S+2332 LC10D |
SFP+ (1m/3m DAC) |
CCR1072-1G-8S+ | + | + | + | + | + | + | + | + | + | + |
CCR1036-12G-4S | + | + | - | + | + | + | + | + | + | + |
CCR1036-8G-2S+ | + | + | + | + | + | + | + | + | + | + |
CCR1016-12S-1S+ | + 1 | + 1 | + | + 1 | + 1 | + 1 | + | + | + | + |
CCR1009-7G-1C | + | + | - | + | + | + | + | + | + | + |
CCR1009-8G-1S-1S+ | + | + | + | + | + | + | + | + | + | + |
CCR1009-7G-1C-1S+ | + | + | + | + | + | + | + | + | + | + |
CRS125-24G-1S | + | + | - | + | + | + | + | + | + | + |
CSS/CRS326-24G-2S+ | + | + | + | + | + | + | + | + | + | + |
CSS/CRS317-1G-16S+ | + | + | + 3 | + | + | + | + | + | + | + |
CRS226-24G-2S+ | + 2 | - | + | + 2 | + 2 | + 2 | + | + | + | + |
CRS212-1G-10S-1S+ | + 1 | + 1 | + | + 1 | + 1 | + 1 | + | + | + | + |
CRS210-8G-2S+ | + 2 | - | + | + 2 | + 2 | + 2 | + | + | + | + |
CRS112-8G-4S/8P-4S | + | + | - | + | + | + | + | + | + | + |
CRS109-8G-1S | + | + | - | + | + | + | + | + | + | + |
CRS106-1C-5S / FiberBox |
+ | + | - | + | + | + | + | + | + | + |
RB3011 | + | + | - | + | + | + | + | + | + | + |
RB2011 | + | + | - | + | + | + | + | + | + | + |
RB260 | + | + | - | + | + | + | + | + | + | + |
RB922 / RB921 |
+ | + | - | + | + | + | + | + | + | + |
RB953GS | + | + | - | + | + | + | + | + | + | + |
hAP AC | + | + | - | + | + | + | + | + | + | + |
hEX PoE / PowerBox Pro |
+ | + | - | + | + | + | + | + | + | + |
FTC | + | + | - | + | + | + | + | + | + | + |
Legend | ||
Color codes: | Not supported | Check notes below |
NOTES:
- 1 CCR1016-12S-1S+ / CRS212-1G-10S-1S+ - SFP+1 interface does not work on any other
- link speed than 10G (does not support 1.25G fiber optic transceivers)
- 2 CRS226 / CRS210 - Only SFP+1 interface supports SFP 1.25G fiber optic transceivers,
- SFP+2 works only with 10G transceivers/links.
- 3 CSS317 / CRS317 - Power controller supports up to 14 simultaneous S+RJ10 modules.
Proper support for S-RJ01 modules on CCR1072-1G-8S+ is enabled only staring with v6.34rc software builds. |
S-RJ01
Table that states in what link rates if mounted in specific MikroTik devices S-RJ01 module will be able to work.
Model | 1000 | 100 | 10 |
RB3011 | + | + | + |
RB922 | + | + | + |
RB921 | + | + | + |
hAP ac | + | + | + |
hEX PoE | + | + | + |
RB953 | +/+ | +/- | +/- |
RB2011 | + | - | - |
RB260 | + | - | - |
FTC | + | - | - |
CRS106 | + | + | + |
CRS112 | + | + | + |
CRS125/CRS109 | + | + | + |
CRS212 | + | + | + |
CRS226/CRS210 | - | - | - |
CSS326/CRS326 | + | - | + |
CSS317/CRS317 | + | - | + |
CCR1009 | +/+ | +/+ | +/+ |
CCR1016-12S-1S+ | + | + | + |
CCR1036-12G-4S | + | + | + |
CCR1036-8G-2S+ | + | + | + |
CCR1072-1G-8S+ | + | + | + |
Notes:
- Rate works fine: +
- Rate does not work: -
- RB953: SFP2/SFP1
- CCR1009: SFP+/SFP
S+RJ10
Speed | Cable type | S+RJ10 to other brand | S+RJ10 to S+RJ10 |
---|---|---|---|
10BASE-T | Cat5e/6 | 100m | 100m |
100BASE-T | Cat5e/6 | 100m | 100m |
1000BASE-T | Cat5e/6 | 100m | 200m |
2.5GBASE-T | Cat5e/6 UTP | 100m | 170m |
2.5GBASE-T | Cat5e/6 STP | 100m | 200m |
5GBASE-T | Cat5e/6 | 100m | 100m |
10GBASE-T | Cat6/7 | 30m | 30m |
SFP+ interface compatibility settings with 1G links
For MikroTik devices with SFP+ interface that support both 10G and 1G link rate following settings are needed
- to be set on both linked devices for required interfaces. In order to get them working in 1G link rate.
- auto-negotiation disabled
- port speed 1G
- FD
Devices which SFP+ ports support 1G links:
- CCR1072-1G-8S+ - All SFP+ interfaces can be used in 1G mode if required.
- CCR1036-8G-2S+ - All SFP+ interfaces can be used in 1G mode if required.
- CCR1009-8G-1S-1S+ - All SFP+ interfaces can be used in 1G mode if required.
- CCR1009-7G-1C-1S+ - All SFP+ interfaces can be used in 1G mode if required.
- CSS326-24G-2S+RM - All SFP+ interfaces can be used in 1G mode if required.
- CRS226-24G-2S+ - Only SFP+1 supports 1G link speed, SFP+2 is for 10G links only.
- CRS210-8G-2S+ - Only SFP+1 supports 1G link speed, SFP+2 is for 10G links only.
Devices which SFP+ interfaces can be used only for 10G links:
- CCR1016-12S-1S+
- CRS212-1G-10S-1S+
SFP interface compatibility with 100M fiber links
Combo interface SFP part on below mentioned devices is compatible with fast ethernet fiber links.
Compatible devices:
- CCR1009-7G-1C
- CCR1009-7G-1C-1S+
- CRS106-1C-5S
S-GPON-ONU
Confirmed OLT device manufacturers that work with this GPON ONT module.
- ZTE
- Huawei
- Alcatel-Lucent
- Calix
- Adtran
- BDCOM
Some basic configuration examples for quick test:
- Huawei
- ZTE
- Adtran
Article: GPON module basic test examples
OSPF over S-GPON-ONU
To get OSPF network information forwarding working over GPON-ONU module NBMA network configuration must be used.