Microchip SAM9X60-EK
From TechInfoDepot
Jump to navigationJump to searchSingle Board Computer | |
3rd Party Firmware | |
---|---|
dd-wrt |
Status Unknown |
OpenWrt | |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
Microchip SAM9X60-EK |
Type |
single-board computer |
CPU1 |
Microchip SAM9X60 |
CPU1 Speed |
600 MHz |
Flash1 Chip |
Micron MT29F4G08ABAEA |
Flash1 Size |
512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (NAND) |
Flash2 Chip |
Microchip SST26VF064B |
Flash2 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (QSPI) |
RAM1 Size |
512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (DDR2) |
RAM1 Chip |
Winbond W972GG6KB-25 |
ETH chip1 |
Microchip SAM9X60 |
Ethernet Port Count |
1-100MbE-LAN |
Wired Standard |
IEEE 802.3i/3u |
| |
Expansion IF types |
SD, one PIO connector, one mikrobus connector, USB 2.0 |
USB ports |
3 |
SD/MMC Slots |
1 |
USB Hub Compatible |
Untested |
Power |
5 VDC, 1 A |
Connector type |
barrel |
Serial Port (UART) |
Yes |
JTAG Port |
Yes |
Other | |
| |
3rd Party Firmware Support |
For a list of all currently documented Microchip (SMSC) chipsets with specifications, see Microchip.
For a list of all currently documented Microchip device with specifications, see Microchip.
Overview
Hardware
- SoC: SAM9X60 - RAM: Winbond W972GG6KB-25 (2Gbit DDR2) - NAND Flash: Micron MT29F4G08ABAEA - QSPI Flash: Microchip SST26VF064B - EEPROM: Microchip 24AA02E48 - SDMMC: One standard 4-bit SD card interface - USB: two stacked Type-A connectors with power switches, one micro-B USB device - CAN: 2 interfaces (Microchip MCP2542) - Ethernet: one 10/100Mbps - WiFi/BT: one optional WiFi/Bluetooth interface - Audio: one ClassD port - Display: one 24-bit LCD interface - Camera: one 12-bit image sensor interface - IO: one IO expander (Microchip MCP23008) - Debug ports: one J-Link-OB + CDC, one JTAG interface - Leds: one RGB LED - Buttons: 4 push button switches - Expansion: one PIO connector, one mikrobus connector - Power management: two power regulators, two power consumption measurement devices
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
On the OpenWrt ToH (techdata entry)
OpenWrt Target: at91
OpenWrt Subtarget: sam9x
OpenWrt Package architecture: arm_arm926ej-s
Support started version: 22.03.0
Current supported version: 23.05.5
OpenWrt Target: at91
OpenWrt Subtarget: sam9x
OpenWrt Package architecture: arm_arm926ej-s
Support started version: 22.03.0
Current supported version: 23.05.5
Please insert instructions here