Loopcomm LP-8186
From TechInfoDepot
Jump to navigationJump to searchbg (G54) | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
wireless router | |||||||||||||
3rd Party Firmware | |||||||||||||
dd-wrt |
Status Unknown | ||||||||||||
OpenWrt |
Status Unknown | ||||||||||||
Tomato any flavor |
Incompatible | ||||||||||||
Platform | |||||||||||||
Brand • Model • Rev |
Loopcomm LP-8186 | ||||||||||||
FCC ID | |||||||||||||
Type |
wireless router | ||||||||||||
CPU1 | |||||||||||||
CPU1 Type |
Lexra LX5280 | ||||||||||||
CPU1 Speed |
180 MHz | ||||||||||||
Flash1 Chip |
Macronix Model? | ||||||||||||
Flash1 Size |
? MiB | ||||||||||||
RAM1 Size |
? MiB | ||||||||||||
RAM1 Chip |
Brand? Model? | ||||||||||||
ETH chip1 | |||||||||||||
Switch |
Realtek RTL8305SC | ||||||||||||
Ethernet Port Count |
1-WAN 4-100MbE-LAN | ||||||||||||
Wired Standard |
IEEE 802.3i/3u | ||||||||||||
802dot11 OUI: none specified | |||||||||||||
Expansion IF types |
none specified | ||||||||||||
Power |
12 VAC ~ ? Hz, 1 A | ||||||||||||
Connector type |
barrel | ||||||||||||
Other | |||||||||||||
Default IP address: 192.168.1.254 | |||||||||||||
Retail | |||||||||||||
FCC approval date | 10 December 2008 | ||||||||||||
Country of manuf | Taiwan | ||||||||||||
Radio 1 | |||||||||||||
Chip1 | |||||||||||||
Chip2 |
Realtek Model? | ||||||||||||
Wireless interface OUI |
none specified | ||||||||||||
Antenna Connector Type |
RP-SMA | ||||||||||||
Wireless Standard |
IEEE 802.11b/g | ||||||||||||
802.11g |
up to 54 Mbps | ||||||||||||
802.11b |
up to 11 Mbps | ||||||||||||
WiFi Operating Frequency |
2.4 GHz | ||||||||||||
|
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
For a list of all currently documented Loopcomm device with specifications, see Loopcomm.
- • 54 Mbps - 2.4GHz 802.11g = G54 class
Overview
"LP8186_20822_V1.0" appears to be silkscreened on the board in the FCC photos.
The power adapter shown in the FCC photos is a DVE DV-121AACS (120VAC ~ 60Hz, 23W -> 12VAC, 1.0A).