Linksys WRTU54G-TM
bg (G54) | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wireless-G Broadband Router with 2 Phone Ports | |||||||||||||
Support | |||||||||||||
Wikipedia | |||||||||||||
3rd Party Firmware | |||||||||||||
dd-wrt |
Status Unknown | ||||||||||||
OpenWrt | |||||||||||||
Tomato any flavor |
Incompatible | ||||||||||||
Gargoyle |
Status Unknown | ||||||||||||
Platform | |||||||||||||
Brand • Model • Rev |
Linksys WRTU54G-TM | ||||||||||||
Serial number prefix |
QMF0 | ||||||||||||
FCC ID | |||||||||||||
IC ID | |||||||||||||
Type |
wireless router, analog phone gateway | ||||||||||||
CPU1 |
Infineon ADM8668FX | ||||||||||||
CPU1 Type |
MIPS 4Kc | ||||||||||||
CPU1 Speed |
200 MHz | ||||||||||||
Flash1 Chip |
Macronix MX29LV640DBTC-90G | ||||||||||||
Flash1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> | ||||||||||||
RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> | ||||||||||||
RAM1 Chip |
Mira P3V56S40ETP-G6 x 2 | ||||||||||||
ETH chip1 |
Infineon ADM8668FX | ||||||||||||
Switch |
Infineon ADM6996M | ||||||||||||
VOIP Ports |
2 | ||||||||||||
Ethernet Port Count |
1-WAN 4-100MbE-LAN | ||||||||||||
Wired Standard |
IEEE 802.3i/3u | ||||||||||||
Stock bootloader |
U-Boot 2.1.4 | ||||||||||||
Stock FW OS |
Linux 2.4.31 | ||||||||||||
Expansion IF types |
none specified | ||||||||||||
Power |
12 VDC, 1.5 A | ||||||||||||
Connector type |
barrel 5.5 mm (OD) 2.1 mm (ID) 10 mm (LEN) | ||||||||||||
Serial Port (UART) |
yes, (115200 8N1) | ||||||||||||
Flags: boot log | |||||||||||||
Additional chips | |||||||||||||
Other | |||||||||||||
Default SSID: @HomeXXXX (2 addl. devices) | |||||||||||||
Manuf/OEM/ODM | |||||||||||||
3rd Party Firmware Support | |||||||||||||
Retail | |||||||||||||
Availability | End of Life | ||||||||||||
FCC approval date | 07 August 2007 | ||||||||||||
UPC |
745883575350 (UPC DB, On eBay) | ||||||||||||
ASIN | B003UBJZ6G | ||||||||||||
Country of manuf | China | ||||||||||||
Radio 1 | |||||||||||||
Chip1 |
Ralink RT2561S | ||||||||||||
Chip2 |
Ralink RT2527 | ||||||||||||
Wireless interface OUI |
00:1E:E5, 00:21:29, 00:22:6B | ||||||||||||
Antenna Connector Type |
U.FL, RP-SMA | ||||||||||||
Wireless Standard |
IEEE 802.11b/g | ||||||||||||
802.11g |
up to 54 Mbps | ||||||||||||
802.11b |
up to 11 Mbps | ||||||||||||
WiFi Operating Frequency |
2.4 GHz | ||||||||||||
|
For a list of all currently documented Infineon (Lantiq) chipsets with specifications, see Infineon.
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
For a list of all currently documented Linksys device with specifications, see Linksys.
- • 54 Mbps - 2.4GHz 802.11g = G54 class
Overview
2010-12-16 final firmware version 1.00.25
WRTU54G-TM serial numbers appear to start with QMF0.
"613-180173R" is silkscreened on the board.
- This is presumed to be a Tecom P/N.
The default SSID is @HomeXXXX where XXXX is the last two octets of the wireless interface MAC address (upper case letters).
The power adapter included with the device is a PSA18R-120P (12V, 1.5A).
Links of Interest
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 8MB FLASH / 64MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 8/64 warning for details. This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that you will not be able to install many packages, and that you might experience crashes due to OOM situations more or less often. See OpenWrt on 8/64 devices what you can do now. |
On the OpenWrt Forum
Support started version: 12.09
Current supported version: 12.09
Please insert instructions here
JTAG-Serial Info
Serial
Serial Pinouts
JP2 1 [VCC] 2 [TxD] 3 [RxD] 4 [GND]
Boot log |
---|
07e?4 (v1.00.02) U-Boot 2.1.4 (Jan 28 2008 - 14:56:42) DRAM: 64 MB Flash: 8 MB In: serial Out: serial Err: serial Net: adm8668_net Hit any key to stop autoboot: 0 ## Booting image at b0040000 ... Check vendor string... Image Name: ADM8668 Linux Kernel(2.4.31) Created: 2010-05-26 0:52:58 UTC Image Type: MIPS Linux Kernel Image (gzip compressed) Data Size: 5664704 Bytes = 5.4 MB Load Address: 00002000 Entry Point: 80222040 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Starting kernel ... LINUX/8668 started... CPU revision is: 0001800b Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes. Primary data cache 8kB, 2-way, linesize 16 bytes. Linux version 2.4.31-ADM8668 (root@localhost.localdomain) (gcc version 3.3.6) #1.00.25 17:51:34 PDT 05/25/2010 Can't analyze prologue code at 8001f824 adm8668_setup() starts. System has PCI BIOS Determined physical RAM map: memory: 03d88000 @ 00278000 (usable) On node 0 totalpages: 16384 zone(0): 16384 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: rootfstype=squashfs root=/dev/mtdblock1 console=/dev/ttyS0 CPU clock: 200 MHz Using 100.000 MHz high precision timer. Syam before calibrate_delay Calibrating delay loop... 199.47 BogoMIPS Syam after calibrate_delay MIPS CPU counter frequency is fixed at 100000000 Hz Memory: 62296k/63008k available (2160k kernel code, 712k reserved, 124k data, 104k init, 0k highmem) Dentry cache hash table entries: 8192 (order: 4, 65536 bytes) Inode cache hash table entries: 4096 (order: 3, 32768 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 16384 (order: 4, 65536 bytes) Checking for 'wait' instruction... available. POSIX conformance testing by UNIFIX The GAN WDT version is 0.0.1 The Built TIME is 17:52:43 Autoconfig PCI channel 0x8025c9f8 Scanning bus 00, I/O 0x12600000:0x12800000, Mem 0x16000000:0x1e000000 00:00.0 Class 0600: 1317:8688 Mem unavailable -- skipping I/O at 0x12600000 [size=0x100000] 00:01.0 Class 0280: 1814:0301 Mem at 0x16000000 [size=0x8000] ADM8668 PCI FIXUP PCI_BIOS_FIXUP Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd Squashfs 2.2 (released 2005/07/03) (C) 2002-2004, 2005 Phillip Lougher pty: 256 Unix98 ptys configured HDLC line discipline: version $Revision: 1.1.1.1 $, maxframe=4096 N_HDLC line discipline registered. NOR flash vendor: 0xc2 device: 0x22cb Backup segment is working! ADM8668 proc initialization okay! adm1: Infineon-ADMtek onchip network rev 0 at 0x11600000, 00:1E:E5:B7:0E:32, IRQ 8. adm0: Infineon-ADMtek onchip network rev 0 at 0x11a00000, 00:1E:E5:B7:0E:31, IRQ 7. SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256). RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize loop: loaded (max 8 devices) PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered SCSI subsystem driver Revision: 1.00 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 *RT61*<7>===> RT61_init_one *RT61*<7>Driver version-1.1.0.0 *RT61*<7>ra0: at 0x16000000, VA 0xb6000000, IRQ 14. *RT61*<7><=== RT61_init_one usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb_hcd_arc_probe : ehci_hcd USB Base Address: b1200100<6>usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 1 port detected NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 4096 bind 8192) Linux IP multicast router 0.06 plus PIM-SM ip_conntrack version 2.1 (512 buckets, 4096 max) - 600 bytes per conntrack ip_conntrack_rtsp v0.01 loading ip_nat_rtsp v0.01 loading ip_tables: (C) 2000-2002 Netfilter core team ipt_time loading NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Ethernet Bridge 008 for NET4.0 ADM8668 NOR flash device: 800000 at 10000000 ADM8668 NOR flash device: Found 1 x16 devices at 0x0 in 16-bit bank Amd/Fujitsu Extended Query Table at 0x0040 number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. Creating 2 MTD partitions on "ADM8668 NOR flash device": 0x00030000-0x001b0000 : "Kernel Image" 0x00200000-0x00600000 : "LZMA Image" ADM8668 NOR flash device initialized VFS: Mounted root (squashfs filesystem) readonly. Freeing prom memory: 0kb freed Freeing unused kernel memory: 104k freed init started: BusyBox v1.00 (2010.05.26-00:45+0000) multi-call binary Algorithmics/MIPS FPU Emulator v1.5 Starting RAWACCESS device driver... Using /lib/modules/ifx_raw_acs (raw_acs)Init raw_acs successfully! Vendor: 0xc2 Device: 0x22cb Flash size: 800000 hub.c: new USB device ehci_hcd-1, assigned address 2 usb.c: USB device 2 (vend/prod 0x8e6/0x3480) is not claimed by any active driver. rawdev opened! (raw_acs)flash_read (b0020000) Read RAW_INFO... Read 19685 bytes from flash (fd: 3) 18229 bytes...Uncompressed to...124221 bytes Write 13270 bytes to /nv/rc.conf Write 352 bytes to /nv/udhcpd.leases Write 3600 bytes to /nv/umastatus1.log Write 203 bytes to /nv/prd_config.txt Write 414 bytes to /nv/rc.static Write 960 bytes to /nv/11e_info Write 21018 bytes to /nv/LICENSE Write 14582 bytes to /nv/rc.filter Write 1297 bytes to /nv/RT61AP.dat Write 1469 bytes to /nv/rc.wlanmac Write 4208 bytes to /nv/ccmapper.conf Write 5120 bytes to /nv/kineto_ps_01 Write 28864 bytes to /nv/nas_1.conf Write 28864 bytes to /nv/nas_2.conf Read data completely! rawdev opened! Set raw access addr: 201f0000(raw_acs)ioctl: RAWDRV_IOCSRAWACSADDR (raw_acs)Raw Access Addr: 201f0000 rawdev opened! (raw_acs)flash_read (b05f0000) Read RAW_INFO... Read 6003 bytes from flash (fd: 3) Data Not Compressed! Write 4547 bytes to /tmp/crt.pem Read data completely! rawdev opened! Set raw access addr: 1fc20000(raw_acs)ioctl: RAWDRV_IOCSRAWACSADDR (raw_acs)Raw Access Addr: 1fc20000 The rc.conf is up-to-day. The rc.conf is up-to-day. The rc.conf is up-to-day. The rc.conf is up-to-day. The rc.conf is up-to-day. The rc.conf is up-to-day. The rc.conf is up-to-day. The rc.conf is up-to-day. The rc.conf is up-to-day. The rc.conf is up-to-day. Starting GAN-VINETIC Board driver... Using ./BSP_GAN_driver Warning: loading BSP_GAN_driver will taint the kernel: no license See http://www.tux.org/lkml/#export-tainted for information about tainted modules Vinetic Board Driver(Included SPI driver) Version : 1.0.0 Starting VINETIC device driver... Using ./drv_vinetic Warning: loading drv_vinetic will taint the kernel: no license See http://www.tux.org/lkml/#export-tainted for information about tainted modules VINETIC device driver, version 1.1.17.3 <6>(c) Copyright 2006, Infineon Technologies AG Using /lib/modules/swmod.o Loading ADM6996 driver... Kernel module version: v1.0 Driver version: v2.0beta3 Date code: 2008-11-20 Setting default ADM6996 registers... ADM6996 proc initialization okay! Set queue 1 to priority 2 Set queue 2 to priority 4 Set queue 3 to priority 8 Version: CCMAPPER_LIGHT_V1.00 <7>WARN: No ring configuration in BBD => default ring config is programmed <7>WARN: No dc threshold configuration in BBD => default threshold configuration is programmed Sherlock Debug nEdspVers != 0x0200 Using /usr/nas/klinux.o Warning: loading klinux will taint the kernel: no license See http://www.tux.org/lkml/#export-tainted for information about tainted modules Using /usr/nas/sio_ring.o Warning: loading sio_ring will taint the kernel: no license See http://www.tux.org/lkml/#export-tainted for information about tainted modules Using /usr/nas/io_lchan.o Warning: loading io_lchan will taint the kernel: no license See http://www.tux.org/lkml/#export-tainted for information about tainted modules Using /usr/nas/io_lphone.o Warning: loading io_lphone will taint the kernel: no license See http://www.tux.org/lkml/#export-tainted for information about tainted modules Using /usr/nas/io_lapp.o Warning: loading io_lapp will taint the kernel: no license See http://www.tux.org/lkml/#export-tainted for information about tainted modules Using /lib/modules/kbutton.o Loading ADM8668 kbutton driver: Version 1.02 Using /lib/modules/ip_conntrack_proto_gre.o TMO Pairing Version : 1.0.3 Using /lib/modules/ip_conntrack_pptp.o ip_conntrack_pptp version 1.9 loaded Using /lib/modules/ip_nat_proto_gre.o Using /lib/modules/ip_nat_pptp.o ip_nat_pptp version 1.5 loaded Tue Apr 17 17:29:00 UTC 2012 Initialize Ralink Wlan ... Setting Pairing LED to : ON-Green *RT61*<7>===> NICLoadFirmware *RT61*<7>NICLoadFirmware: CRC ok, ver=1.2 *RT61*<7><=== NICLoadFirmware (src=/etc/Wireless/RT61AP/RT2561S.bin, status=0) *RT61*<7>--> RTMPAllocAdapterBlock *RT61*<7><-- RTMPAllocAdapterBlock *RT61*<7>--> RTMPAllocDMAMemory *RT61*<7>TxRing[0]: total 96 entry allocated *RT61*<7>TxRing[1]: total 96 entry allocated *RT61*<7>TxRing[2]: total 96 entry allocated *RT61*<7>TxRing[3]: total 96 entry allocated *RT61*<7>TxRing[4]: total 96 entry allocated *RT61*<7>MGMT Ring: total 32 entry allocated *RT61*<7>Rx Ring: total 96 entry allocated *RT61*<7><-- RTMPAllocDMAMemory *RT61*<7><--> NICInitTxRxRingAndBacklogQueue *RT61*<7>--> MLME Initialize *RT61*<7><-- MLME Initialize *RT61*<7>--> PortCfgInit *RT61*<7><-- PortCfgInit *RT61*<7>--> NICInitializeAdapter *RT61*<7>--> NICInitializeAsic *RT61*<7>BBP version = 22 *RT61*<7><-- NICInitializeAsic *RT61*<7><-- NICInitializeAdapter *RT61*<7>CountryRegion=5 *RT61*<7>CountryRegionABand=7 *RT61*<7>CountryCode= *RT61*<7>SSID[0]=FlowersEstateFreeInternetService *RT61*<7>PhyMode=0 *RT61*<7>I/F(ra0) TxRate=(6c,60,48,30,16,0b,04,02,00,00,00,00) *RT61*<7>Channel=6 *RT61*<7>BasicRate=15 *RT61*<7>BeaconPeriod=100 *RT61*<7>DtimPeriod=1 *RT61*<7>TxPower=100 *RT61*<7>BGProtection=2 *RT61*<7>OLBCDetection=0 *RT61*<7>TxAntenna=1 *RT61*<7>RxAntenna= *RT61*<7>TxPreamble=0 *RT61*<7>RTSThreshold=2347 *RT61*<7>FragThreshold=2346 *RT61*<7>TxBurst=0 *RT61*<7>PktAggregate=1 *RT61*<7>TurboRate=0 *RT61*<7>I/F(ra0) WmmCapable=1 *RT61*<7>I/F(ra0) DLSCapable=0 *RT61*<7>APAifsn[0]=3 *RT61*<7>APAifsn[1]=7 *RT61*<7>APAifsn[2]=1 *RT61*<7>APAifsn[3]=1 *RT61*<7>APCwmin[0]=4 *RT61*<7>APCwmin[1]=4 *RT61*<7>APCwmin[2]=3 *RT61*<7>APCwmin[3]=2 *RT61*<7>APCwmax[0]=6 *RT61*<7>APCwmax[1]=10 *RT61*<7>APCwmax[2]=4 *RT61*<7>APCwmax[3]=3 *RT61*<7>APTxop[0]=0 *RT61*<7>APTxop[1]=0 *RT61*<7>APTxop[2]=94 *RT61*<7>APTxop[3]=47 *RT61*<7>APACM[0]=0 *RT61*<7>APACM[1]=0 *RT61*<7>APACM[2]=0 *RT61*<7>APACM[3]=0 *RT61*<7>BSSAifsn[0]=3 *RT61*<7>BSSAifsn[1]=7 *RT61*<7>BSSAifsn[2]=2 *RT61*<7>BSSAifsn[3]=2 *RT61*<7>BSSCwmin[0]=4 *RT61*<7>BSSCwmin[1]=4 *RT61*<7>BSSCwmin[2]=3 *RT61*<7>BSSCwmin[3]=2 *RT61*<7>BSSCwmax[0]=10 *RT61*<7>BSSCwmax[1]=10 *RT61*<7>BSSCwmax[2]=4 *RT61*<7>BSSCwmax[3]=3 *RT61*<7>BSSTxop[0]=0 *RT61*<7>BSSTxop[1]=0 *RT61*<7>BSSTxop[2]=94 *RT61*<7>BSSTxop[3]=47 *RT61*<7>BSSACM[0]=0 *RT61*<7>BSSACM[1]=0 *RT61*<7>BSSACM[2]=0 *RT61*<7>BSSACM[3]=0 *RT61*<7>AckPolicy[0]=0 *RT61*<7>AckPolicy[1]=0 *RT61*<7>AckPolicy[2]=0 *RT61*<7>AckPolicy[3]=0 *RT61*<7>APSDCapable=1 *RT61*<7>I/F(ra0) NoForwarding=0 *RT61*<7>NoForwardingBTNBSSID=0 *RT61*<7>I/F(ra0) HideSSID=0 *RT61*<7>ShortSlot=1 *RT61*<7>AutoChannelAtBootup=0 *RT61*<7>MaxTxPowerLevel=16 *RT61*<7>IEEE8021X=0 *RT61*<7>IEEE80211H=0 *RT61*<7>CSPeriod=10 *RT61*<7>PreAuth=0 *RT61*<7>RTMPMakeRSNIE IF(ra0): RSNIE_Len[0]=6, RSNIE_Len[1]=0 *RT61*<7>I/F(ra0) AuthMode=4 *RT61*<7>RTMPMakeRSNIE IF(ra0): RSNIE_Len[0]=22, RSNIE_Len[1]=0 *RT61*<7>I/F(ra0) EncrypType=4 *RT61*<7>ReKeyMethod=0 *RT61*<7>ReKeyInterval=3600 *RT61*<7>PMKCachePeriod=60000 *RT61*<7>I/F(ra0) WPAPSK_KEY=white202 *RT61*<7>strong RSSI=0, CCA=0, fixed R17 at 0x41, R62=4 *RT61*<7>I/F(ra0) WPAPSK Key => 9f:6d:17:ac:71:84:b0:4f:c5:48:b2:5b:3d:92:68:81: f7:cc:5a:9d:e6:f7:c4:f2:fa:fd:1e:0d:65:39:a1:32: *RT61*<7>I/F(ra0) DefaultKeyID(0~3)=1 *RT61*<7>I/F(ra0) Key1Str=f933e98d7a and type=Hex *RT61*<7>I/F(ra0) Key2Str=9456cc6905 and type=Hex *RT61*<7>I/F(ra0) Key3Str=8ecdaf99de and type=Hex *RT61*<7>I/F(ra0) Key4Str=f52d7e4f7a and type=Hex *RT61*<7>HSCounter=0 *RT61*<7>AccessPolicy0=0 *RT61*<7>AccessControlList0=Get 0 Mac Address *RT61*<7>--> NICReadEEPROMParameters *RT61*<7>MBSSID[0] MAC=00:1e:e5:b7:0e:30 *RT61*<7>E2PROM: Version = 1, FAE release #0 *RT61*<7>E2PROM: G Tssi[-4 .. +4] = 255 255 255 255 - 255 -255 255 255 255, step=255, tuning=0 *RT61*<7>E2PROM: A Tssi[-4 .. +4] = 255 255 255 255 - 255 -255 255 255 255, step=255, tuning=0 *RT61*<7>E2PROM: RF freq offset=0x11, RF programming seq=0 *RT61*<7>TxPowerDelta Config (Delta=2, Sign=0, Enable=1) *RT61*<7><-- NICReadEEPROMParameters *RT61*<7>country code=5/7, RFIC=1, PHY mode=0, support 14 channels *RT61*<7>channel #1 *RT61*<7>channel #2 *RT61*<7>channel #3 *RT61*<7>channel #4 *RT61*<7>channel #5 *RT61*<7>channel #6 *RT61*<7>channel #7 *RT61*<7>channel #8 *RT61*<7>channel #9 *RT61*<7>channel #10 *RT61*<7>channel #11 *RT61*<7>channel #12 *RT61*<7>channel #13 *RT61*<7>channel #14 *RT61*<7>IF(ra0) RTMPSetPhyMode(=0) *RT61*<7>I/F(ra0) TxRate=(6c,60,48,30,16,0b,04,02,00,00,00,00) *RT61*<7>--> NICInitAsicFromEEPROM *RT61*<7>RFIC=3, LED mode=26 *RT61*<7><-- NICInitAsicFromEEPROM *RT61*<7>---> ApInitialize *RT61*<7><--- ApInitialize *RT61*<7>---> ApStartUp *RT61*<7>IF(ra0) CapabilityInfo=411, WepStatus=4 *RT61*<7>IF(ra0)-AP AuthMode=4, IEEE802.1x is 0, Pairwise Key Table in-used *RT61*<7>AsicRemoveSharedKeyEntry: #0 *RT61*<7>AsicRemoveSharedKeyEntry: #1 *RT61*<7>AsicRemoveSharedKeyEntry: #2 *RT61*<7>AsicRemoveSharedKeyEntry: #3 *RT61*<7>AsicSetEdcaParm *RT61*<7>AP [Cnt#0]: AIFSN CWmin CWmax TXOP(us) ACM *RT61*<7> AC_BE 3 4 6 0 0 *RT61*<7> AC_BK 7 4 10 0 0 *RT61*<7> AC_VI 1 3 4 3008 0 *RT61*<7> AC_VO 1 2 3 1504 0 *RT61*<7>STA : AIFSN CWmin CWmax TXOP(us) ACM *RT61*<7> AC_BE 3 4 10 0 0 *RT61*<7> AC_BK 7 4 10 0 0 *RT61*<7> AC_VI 2 3 4 3008 0 *RT61*<7> AC_VO 2 2 3 1504 0 *RT61*<7>AsicSwitchChannel(RF=3, Pwr=14) to #6, R1=0x95002ccc, R2=0x9500478e, R3=0x95069c55, R4=0x950d1a1f *RT61*<7>UpdateBasicRateBitmap::(BasicRateBitMap=f)(82,84,8b,96,0c,12,18,24,30,48,60,6c) *RT61*<7>IF(ra0) MlmeUpdateTxRates (MaxDesire=54 Mbps, MaxSupport=54 Mbps, MaxTxRate=54 Mbps, Rate Switching =1) *RT61*<7> MlmeUpdateTxRates (RtsRate=11 Mbps, MlmeRate=1 Mbps, BasicRateBitmap=0x015f) *RT61*<7>MakeBssBeacon(ra0)(FrameLen=103,TimIELocateInBeacon=103,CapInfoLocateInBeacon=34) *RT61*<7>SW interrupt MCU (cmd=0x60, token=0xff, arg1,arg0=0x00,0x00) *RT61*<7>--->AsicEnableBssSync(INFRA mode) *RT61*<7>--->Disable TSF synchronization *RT61*<7>SW interrupt MCU (cmd=0x50, token=0xff, arg1,arg0=0x3f,0x3a) *RT61*<7>MlmePeriodicExec: no traffic, Reset AsicBbpTuning *RT61*<7>Reset AsicBbpTuning, BBP_R62=4, OneSecFalseCCACnt=263 *RT61*<7>SW interrupt MCU (cmd=0x50, token=0xff, arg1,arg0=0x3f,0x7a) *RT61*<7>LOG#0 00:1e:e5:b7:0e:30 restart access point *RT61*<7><--- ApStartUp (sec_csr4=0x1) *RT61*<7>==> Set_Debug_Proc ******************* Ralink Wlan is ready. device adm0 entered promiscuous mode device ra0 entered promiscuous mode adm0: Promiscuous mode enabled. adm0: Promiscuous mode enabled. adm0: Promiscuous mode enabled. br0: port 2(ra0) entering learning state br0: port 1(adm0) entering learning state Killall luma applications... Run luma applicaitons... LUMA Agent starting... LUMA LogP starting... Starting DHCP Client .... udhcpc (v0.9.9-pre) started Sending discover... Sending discover... Sending discover... No lease, forking to background. Setting Hostname: . br0: port 2(ra0) entering forwarding state br0: topology change detected, propagating br0: port 1(adm0) entering forwarding state br0: topology change detected, propagating [: reconfig: unknown operand [: rerun: unknown operand [: rerun: unknown operand Failure parsing line 8 of /etc/udhcpd.conf udhcpd (v0.9.9-pre) started Unable to open /var/lib/misc/udhcpd.leases for reading rawdev opened! (WRITE) addr: 0200, value: b100 (WRITE) addr: 0220, value: b100 (WRITE) addr: 0240, value: b100 (WRITE) addr: 0260, value: b100 NV Daemon Version : 1.1.0 Daemon Successfully forked (pid: 431) rawdev opened! /nv/rc.conf: 13263 bytes /nv/nas_2.conf: 28864 bytes /nv/nas_1.conf: 28864 bytes /nv/kineto_ps_01: 5120 bytes /nv/ccmapper.conf: 4208 bytes /nv/rc.wlanmac: 1469 bytes /nv/RT61AP.dat: 1288 bytes /nv/rc.filter: 14582 bytes /nv/LICENSE: 21018 bytes /nv/11e_info: 960 bytes /nv/rc.static: 414 bytes /nv/prd_config.txt: 203 bytes /nv/umastatus1.log: 3600 bytes Files: 13 (raw_acs)ioctl: RAWDRV_IOCRSRAWACS (raw_acs)Raw Access Addr: 1fc20000 Got 13263 bytes from /nv/rc.conf Got 28864 bytes from /nv/nas_2.conf Got 28864 bytes from /nv/nas_1.conf Got 5120 bytes from /nv/kineto_ps_01 Got 4208 bytes from /nv/ccmapper.conf Got 1469 bytes from /nv/rc.wlanmac Got 1288 bytes from /nv/RT61AP.dat Got 14582 bytes from /nv/rc.filter Got 21018 bytes from /nv/LICENSE Got 960 bytes from /nv/11e_info Got 414 bytes from /nv/rc.static Got 203 bytes from /nv/prd_config.txt Got 3600 bytes from /nv/umastatus1.log 123853 bytes...Compressed to...18212 bytes Copy 1456 bytes to buffer (raw_acs)Write 19668 Write 19668 bytes to rawdev! Store /nv/* to flash completely! Please press Enter to activate this console. |
Pictures
- Linksys
- Embedded system/wireless router
- Embedded system/analog phone gateway
- Embedded System Infineon
- Embedded System ADM8668FX
- Infineon
- Embedded System MIPS 4Kc
- Embedded System
- Embedded System ADM6996M
- Manuf Tecom
- OpenWrt Supported
- Embedded System Ralink
- Embedded System RT2561S
- Ralink
- Embedded System RT2527
- Embedded System IEEE 802.11b/g
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- English Documentation