Linksys WAP300N

From TechInfoDepot
Jump to navigationJump to search
abgn (AN600)
Wireless-N Access Point
Support
Wikipedia
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Status Unknown
Tomato any flavor
Incompatible
Platform
BrandModelRev
Linksys WAP300N
FCC ID
IC ID
Type
access point
CPU1
Ralink RT6856
CPU1 Type
MIPS 34KEc
CPU1 Speed
not specified
Flash1 Chip
Brand? Model?
Flash1 Size
? MiB
RAM1 Size
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br />
RAM1 Chip
Winbond W9751G6KB-25
ETH chip1
Ralink RT6856
Ethernet Port Count
1-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: none specified

Expansion IF types
none specified
Power
12 VDC, 0.5 A
Connector type
barrel
Other

Default IP address: 10.100.1.1
the IP 10.100.1.1 is used by 2 additional devices
of which 2 are Linksys devices
Default login user: blank
Default login password: admin
blank:admin credentials used by 278 additional devices
of which 135 are Linksys devices

Manuf/OEM/ODM
Retail
FCC approval date 05 December 2012
(Est.) release date 30 April 2013
UPC 745883597208
(UPC DB, On eBay)
ASIN B00BK0YRZS Flag of the United States.svg
Country of manuf Taiwan
Radio 1
Chip1
Ralink RT5592
Wireless interface OUI
none specified
Antenna Connector Type
RP-SMA
MIMO status
2x2:2
Wireless Standard
IEEE 802.11a/b/g/n
802.11n
up to 300/300 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
802.11a
up to 54 Mbps
WiFi Operating Frequency
2.4 or 5 GHz

For a list of all currently documented Ralink chipsets with specifications, see Ralink.

For a list of all currently documented Linksys device with specifications, see Linksys.

300 Mbps - 2SS 5GHz 802.11n (40MHz chan.),
300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = AN600 class

Overview

The Cisco logo and "0500-2130741000" is silkscreened on the board in the FCC photos.

The FCC test report would seem to indicate that this device is using RT5592. It is presumed to be using this chip..

Per the manual..

  • the device will attempt to acquire an IP address via DHCP by default. if it fails, the IP will be set to 10.100.1.1.