Linksys EA7500

multiple revisions of this device, use caution

abgn+ac (AC1900)
Max-Stream AC1900 MU-MIMO Gigabit Wi-Fi Router
Homepage	Product page
Support	Support page
Wikipedia	Linksys routers
WikiDevi.wi-cat.ru	Linksys EA7500
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Supported
Tomato any flavor	Incompatible
Gargoyle	Status Unknown
Platform
Brand • Model • Rev	Linksys EA7500 v1
FCC ID	Q87-EA7500
IC ID	3839A-EA7500
Type	wireless router
CPU1	Qualcomm IPQ8064
CPU1 Type	ARMv7-A Cortex-A15
CPU1 Speed	1.4 GHz ( 2 cores )
Flash1 Chip	Spansion S34MS01G200BHI000
Flash1 Size	128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (NAND)
RAM1 Size	256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br />
RAM1 Chip	Winbond W631GU6KB-15 x 2
ETH chip1	Qualcomm IPQ8064
Switch	Qualcomm Atheros QCA8337
Ethernet Port Count	1-1GbE-WAN 4-1GbE-LAN
Wired Standard	IEEE 802.3i/3u/3ab
802dot11 OUI: none specified
Stock bootloader	U-Boot 1.1.4
Stock FW OS	Linux 3.4.103
Expansion IF types	USB 3.0, USB 2.0
USB ports	2
USB Hub Compatible	Untested
Power	12 VDC, 3.5 A
Connector type	barrel
Serial Port (UART)	yes, 3.3, (115200 8N1)
Flags: Wave2, MU-MIMO, 256QAM
Additional chips 2.4GHz RF Power Amplifier IC;Skyworks;SE2623L;SKY, 2623L, 502AP;3; 5GHz RF Power Amplifier Module;Skyworks;SKY85405;SKY85405, 517GZ, 1517 MY;3;
Other
3rd Party Firmware Support	OpenWrt • (List | Dev | DLs)
Retail
FCC approval date	12 November 2015
(Est.) initial retail price (in USD):	$180
ASIN	B019WAQMVY ,  multiple uses
Country of manuf	China
Radio 1
Chip1	Qualcomm Atheros QCA9983
Wireless interface OUI	none specified
Antenna Connector Type	U.FL, RP-SMA
MIMO status	3x3:3
Wireless Standard	IEEE 802.11b/g/n
N-QAM	up to 600 Mbps
802.11n	up to 450 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
Radio 2
Chip1	Qualcomm Atheros QCA9982
Wireless interface OUI	none specified
Antenna Connector Type	U.FL, RP-SMA
MIMO status	3x3:3
Wireless Standard	IEEE 802.11a/n/ac
802.11ac	up to 1300 Mbps
802.11n	up to 450 Mbps
802.11a	up to 54 Mbps
WiFi Operating Frequency	5 GHz
FCC ID Linksys EA7400 Q87-EA7500
CPU1 brand Radio1 chip1 brand Radio2 chip1 brand Linksys EA7500 Qualcomm Qualcomm Atheros Qualcomm Atheros Linksys EA7500 v2 MediaTek MediaTek MediaTek Linksys EA7500 v3 MediaTek MediaTek MediaTek

For a list of all currently documented Qualcomm chipsets with specifications, see Qualcomm.
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.

For a list of all currently documented Linksys device with specifications, see Linksys.

• 1300 Mbps - 3SS 5GHz 802.11ac (80MHz chan.),

• 600 Mbps - 3SS 2.4GHz 802.11n (40MHz chan., 256-QAM) = AC1900 class

Overview

• Wi-Fi Certified : WFA62240 (as of 11/06/2015)

Links of Interest

Reviews

• Linksys EA7500 AC1900 Wi-Fi Router Reviewed on SmallNetBuilder

Flashing

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)
On the OpenWrt Forum
OpenWrt Target: ipq806x
OpenWrt Subtarget: generic
OpenWrt Package architecture: arm_cortex-a15_neon-vfpv4
Support started version: 21.02.0
Current supported version: 23.05.5

Please insert instructions here

JTAG-Serial Info

Serial

Serial Pinouts

Serial connector JM1:

Pin	Function
1	3V3
2	TX
3	RX
4	-
5	GND

Some componnents may be unsoldered. To use uart 3V3-logic is required to mount:

Componnent	Value
RM327	3KOhm 0201 resistor
RM328	3KOhm 0201 resistor
QA5	N-FET transistor, eg. SI2312
QA6	N-FET transistor, eg. SI2312

Boot log

Boot log • >>

U-Boot .07 [Standard IPQ806X.LN,r40331] (Nov 05 2015 - 14:44:22) CBT U-Boot ver: 1.1.4 smem ram ptable found: ver: 0 len: 5 DRAM: 235 MiB NAND: SF: Unsupported manufacturer 00 ipq_spi: SPI Flash not found (bus/cs/speed/mode) = (0/0/48000000/0) 128 MiB MMC: PCI0 Link Intialized PCI1 Link Intialized In: serial Out: serial Err: serial cdp: get part failed for 0:HLOS Net: MAC1 addr:0:3:7f:ba:db:1 athrs17_reg_init: complete athrs17_vlan_config ...done S17c init done MAC2 addr:0:3:7f:ba:db:2 eth0 Warning: eth0 MAC addresses don't match: Address in SROM is 00:03:7f:ba:db:01 Address in environment is 00:06:3b:01:41:00 , eth1 Updating boot_count ... done Hit any key to stop autoboot: 0 MMC Device 0 not found MMC Device 0 not found Loading from nand0, offset 0xf80000 Image Name: Linux-3.4.103 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1897480 Bytes = 1.8 MiB Load Address: 41508000 Entry Point: 41508000 Automatic boot of image at addr 0x44000000 ... Image Name: Linux-3.4.103 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1897480 Bytes = 1.8 MiB Load Address: 41508000 Entry Point: 41508000 Verifying Checksum ... OK Loading Kernel Image ... OK OK mtdids not defined, no default present info: "mtdparts" not set Using machid 0x1260 from environment Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Linux version 3.4.103 (root@build-vm) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 SMP PREEMPT Thu Feb 15 17:25:15 PST 2018 [ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine: Linksys EA7500 WiFi Router. [ 0.000000] msm_reserve_memory: 0x44600000, 0x200000 [ 0.000000] memory pool 3 (start 4fc00000 size 400000) initialized [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] smem_find(137, 80): wrong size 72 [ 0.000000] socinfo_init: v6, id=202, ver=2.0, raw_id=2064, raw_ver=2064, hw_plat=0, hw_plat_ver=65536 [ 0.000000] accessory_chip=0 hw_plat_subtype=0 [ 0.000000] PERCPU: Embedded 8 pages/cpu @c0a4b000 s11072 r8192 d13504 u32768 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 58154 [ 0.000000] Kernel command line: console=ttyHSL1,115200n8 init=/sbin/init rootfstype=squashfs ubi.mtd=14,2048 ubi.block=0,0 root=/dev/ubiblock0_0 rootwait ro [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 49MB 180MB = 229MB total [ 0.000000] Memory: 223660k/229804k available, 10836k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xcf000000 - 0xff000000 ( 768 MB) [ 0.000000] lowmem : 0xc0000000 - 0xceb00000 ( 235 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0519000 (5188 kB) [ 0.000000] .init : 0xc0600000 - 0xc0702b40 (1035 kB) [ 0.000000] .data : 0xc0704000 - 0xc07a1160 ( 629 kB) [ 0.000000] .bss : 0xc07a1184 - 0xc0849e4c ( 676 kB) [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:1689 [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 31240ns, wraps every 134175798ms [ 0.000000] Console: colour dummy device 80x30 [ 0.150421] Calibrating delay using timer specific routine.. 12.55 BogoMIPS (lpj=62799) [ 0.150452] pid_max: default: 32768 minimum: 301 [ 0.150921] Mount-cache hash table entries: 512 [ 0.152389] CPU: Testing write buffer coherency: ok [ 0.152608] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.152639] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available [ 0.152764] Setting up static identity map for 0x418cbd80 - 0x418cbe08 [ 0.155076] CPU1: Booted secondary processor [ 0.155139] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.155232] Brought up 2 CPUs [ 0.155263] SMP: Total of 2 processors activated (25.11 BogoMIPS). [ 0.171571] dummy: [ 0.172258] NET: Registered protocol family 16 [ 0.173102] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver [ 0.175413] meminfo_init: smem ram ptable found: ver: 0 len: 5 [ 0.175445] Found 1 memory banks grouped into 8 memory regions [ 0.175757] gpiochip_add: registered GPIOs 0 to 151 on device: msmgpio [ 0.176538] smem_find(137, 80): wrong size 72 [ 0.176569] socinfo_init: v6, id=202, ver=2.0, raw_id=2064, raw_ver=2064, hw_plat=0, hw_plat_ver=65536 [ 0.176569] accessory_chip=0 hw_plat_subtype=0 [ 0.176632] msm_rpm_init: RPM firmware 3.0.16777342 [ 0.184442] clk_tbl_nss - loaded [ 0.211184] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.211184] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.211621] msm_dmov_memcpy_init: Success [ 0.218712] sps:BAM 0x12244000 enabled: ver:0x5, number of pipes:20 [ 0.218744] sps:BAM 0x12244000 is registered. [ 0.218994] sps:sps is ready. [ 0.260855] msm_pcie_setup: link initialized [ 0.261230] PCI host bridge to bus 0000:00 [ 0.261262] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fefffff] [ 0.261793] PCI: bus0: Fast back to back transfers disabled [ 0.261793] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.262605] PCI: bus1: Fast back to back transfers disabled [ 0.300968] msm_pcie_setup: link initialized [ 0.301312] PCI host bridge to bus 0000:02 [ 0.301343] pci_bus 0000:02: root bus resource [mem 0x2e000000-0x31efffff] [ 0.301811] PCI: bus2: Fast back to back transfers disabled [ 0.301811] pci 0000:02:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.302530] PCI: bus3: Fast back to back transfers disabled [ 0.421305] msm_pcie_setup: link initialization failed [ 0.421524] pci 0000:02:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff] [ 0.421555] pci 0000:03:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit] [ 0.421587] pci 0000:02:00.0: PCI bridge to [bus 03-03] [ 0.421618] pci 0000:02:00.0: bridge window [mem 0x2e000000-0x2e1fffff] [ 0.421680] PCI: enabling device 0000:02:00.0 (0140 -> 0143) [ 0.421743] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff] [ 0.421774] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit] [ 0.421805] pci 0000:00:00.0: PCI bridge to [bus 01-01] [ 0.421836] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff] [ 0.421868] PCI: enabling device 0000:00:00.0 (0140 -> 0143) [ 0.448391] bio: create slab <bio-0> at 0 [ 0.449953] SCSI subsystem initialized [ 0.451827] spi_qsd spi_qsd.5: master is unqueued, this is deprecated [ 0.454170] spi_qsd spi_qsd.6: master is unqueued, this is deprecated [ 0.458481] Switching to clocksource gp_timer [ 0.480537] NET: Registered protocol family 2 [ 0.490253] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.490877] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.490971] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.491065] TCP: Hash tables configured (established 8192 bind 8192) [ 0.491096] TCP: reno registered [ 0.491096] UDP hash table entries: 128 (order: 0, 4096 bytes) [ 0.491127] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes) [ 0.491565] NET: Registered protocol family 1 [ 0.492970] Detected 5 counters on the L2CC PMU. [ 0.494001] smd: register irq failed on wcnss_a11 [ 0.494033] smd: deregistering IRQs [ 0.494064] SMD: smd_core_platform_init() failed [ 0.494814] Partition(from smem) SBL1 -- Offset:0 Size:2 [ 0.494845] Partition(from smem) MIBIB -- Offset:2 Size:a [ 0.494845] Partition(from smem) SBL2 -- Offset:c Size:a [ 0.494876] Partition(from smem) SBL3 -- Offset:16 Size:14 [ 0.494876] Partition(from smem) DDRCONFIG -- Offset:2a Size:9 [ 0.494907] Partition(from smem) SSD -- Offset:33 Size:9 [ 0.494907] Partition(from smem) TZ -- Offset:3c Size:14 [ 0.494939] Partition(from smem) RPM -- Offset:50 Size:14 [ 0.494970] Partition(from smem) ART -- Offset:64 Size:a [ 0.494970] Partition(from smem) APPSBL -- Offset:6e Size:8 [ 0.495001] get_nand_partitions: partition name=rootfs found. [ 0.495001] Overlaying Olympus partition [ 0.495032] Olympus partition u_env -- Offset:76 Size:2 [ 0.495032] Olympus partition s_env -- Offset:78 Size:2 [ 0.495032] Olympus partition devinfo -- Offset:7a Size:2 [ 0.495064] Olympus partition kernel -- Offset:7c Size:140 [ 0.495064] Olympus partition rootfs -- Offset:94 Size:128 [ 0.495064] Olympus partition alt_kernel -- Offset:1bc Size:140 [ 0.495095] Olympus partition alt_rootfs -- Offset:1d4 Size:128 [ 0.495095] Olympus partition sysdiag -- Offset:2fc Size:8 [ 0.495095] Olympus partition syscfg -- Offset:304 Size:0 [ 0.495126] get_bootconfig_partition: magic not found [ 0.508653] acpuclk-ipq806x acpuclk-ipq806x: SPEED BIN: 0 [ 0.508684] acpuclk-ipq806x acpuclk-ipq806x: ACPU PVS: 1 [ 0.515338] acpuclk-ipq806x acpuclk-ipq806x: CPU0: 6 frequencies supported [ 0.515370] acpuclk-ipq806x acpuclk-ipq806x: CPU1: 6 frequencies supported [ 0.516900] msm_rpm_log_probe: OK [ 0.535363] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.535363] jffs2: version 2.2. (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) © 2001-2006 Red Hat, Inc. [ 0.536707] msgmni has been set to 436 [ 0.538019] io scheduler noop registered [ 0.538050] io scheduler deadline registered (default) [ 0.540018] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 0.543392] msm_serial_hs.0: ttyHS0 at MMIO 0x12490000 (irq = 227) is a MSM HS UART [ 0.544048] msm_serial_hs module loaded [ 0.544236] msm_serial_hsl: detected port #1 [ 0.544361] msm_serial_hsl.1: ttyHSL1 at MMIO 0x16340000 (irq = 184) is a MSM [ 0.544798] msm_serial_hsl: console setup on port #1 [ 1.353108] console [ttyHSL1] enabled [ 1.357200] msm_serial_hsl: driver initialized [ 1.366135] ahci ahci.0: forcing PORTS_IMPL to 0x1 [ 1.369978] ahci ahci.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode [ 1.377819] ahci ahci.0: flags: ncq sntf pm led clo only pmp pio slum part ccc apst [ 1.386941] scsi0 : ahci_platform [ 1.390034] ata1: SATA max UDMA/133 mmio [mem 0x29000000-0x2900017f] port 0x100 irq 241 [ 1.399875] msm_nand_probe: phys addr 0x1ac00000 [ 1.403530] msm_nand_probe: dmac 0x3 [ 1.407122] msm_nand_probe: allocated dma buffer at ffdfc000, dma_addr 4f5c0000 [ 1.415807] status: e00020 [ 1.417494] nandid: 1580a101 maker 01 device a1 [ 1.422524] ONFI probe : Found an ONFI compliant device S34MS01G2 [ 1.429303] Found a supported NAND device [ 1.433114] NAND Controller ID : 0x4030 [ 1.436925] NAND Device ID : 0x1580a101 [ 1.440893] Buswidth : 8 Bits [ 1.443798] Density : 128 MByte [ 1.447016] Pagesize : 2048 Bytes [ 1.450359] Erasesize: 131072 Bytes [ 1.453764] Oobsize : 64 Bytes [ 1.456888] CFG0 Init : 0xa8d408c0 [ 1.460418] CFG1 Init : 0x0004745c [ 1.463855] ECCBUFCFG : 0x00000203 [ 1.468103] Creating 19 MTD partitions on "msm_nand": [ 1.472414] 0x000000000000-0x000000040000 : "SBL1" [ 1.480193] 0x000000040000-0x000000180000 : "MIBIB" [ 1.488191] 0x000000180000-0x0000002c0000 : "SBL2" [ 1.496126] 0x0000002c0000-0x000000540000 : "SBL3" [ 1.505810] 0x000000540000-0x000000660000 : "DDRCONFIG" [ 1.514214] 0x000000660000-0x000000780000 : "SSD" [ 1.521868] 0x000000780000-0x000000a00000 : "TZ" [ 1.531365] 0x000000a00000-0x000000c80000 : "RPM" [ 1.541049] 0x000000c80000-0x000000dc0000 : "ART" [ 1.549047] 0x000000dc0000-0x000000ec0000 : "APPSBL" [ 1.556950] 0x000000ec0000-0x000000f00000 : "u_env" [ 1.563730] 0x000000f00000-0x000000f40000 : "s_env" [ 1.570509] 0x000000f40000-0x000000f80000 : "devinfo" [ 1.577444] 0x000000f80000-0x000003780000 : "kernel" [ 1.639362] 0x000001280000-0x000003780000 : "rootfs" [ 1.697125] 0x000003780000-0x000005f80000 : "alt_kernel" [ 1.738612] ata1: SATA link down (SStatus 0 SControl 300) [ 1.763792] 0x000003a80000-0x000005f80000 : "alt_rootfs" [ 1.820024] 0x000005f80000-0x000006080000 : "sysdiag" [ 1.827772] 0x000006080000-0x000008000000 : "syscfg" [ 1.877069] UBI: attaching mtd14 to ubi0 [ 1.880037] UBI: physical eraseblock size: 131072 bytes (128 KiB) [ 1.886223] UBI: logical eraseblock size: 126976 bytes [ 1.891721] UBI: smallest flash I/O unit: 2048 [ 1.896282] UBI: VID header offset: 2048 (aligned 2048) [ 1.902311] UBI: data offset: 4096 [ 2.195220] UBI: max. sequence number: 2 [ 2.210871] UBI: attached mtd14 to ubi0 [ 2.213683] UBI: MTD device name: "rootfs" [ 2.218806] UBI: MTD device size: 37 MiB [ 2.223586] UBI: number of good PEBs: 296 [ 2.228178] UBI: number of bad PEBs: 0 [ 2.232677] UBI: number of corrupted PEBs: 0 [ 2.237050] UBI: max. allowed volumes: 128 [ 2.241674] UBI: wear-leveling threshold: 4096 [ 2.246329] UBI: number of internal volumes: 1 [ 2.250796] UBI: number of user volumes: 1 [ 2.255170] UBI: available PEBs: 0 [ 2.259731] UBI: total number of reserved PEBs: 296 [ 2.264479] UBI: number of PEBs reserved for bad PEB handling: 2 [ 2.270509] UBI: max/mean erase counter: 1/0 [ 2.274695] UBI: image sequence number: 1211679096 [ 2.279631] UBI: background thread "ubi_bgt0d" started, PID 668 [ 2.287191] UBI: ubiblock0_0 created from ubi0:0(squashfs) [ 2.323711] GPIO Bitbanged MDIO: probed [ 2.328928] PPP generic driver version 2.4.2 [ 2.332802] NET: Registered protocol family 24 [ 2.336644] PPTP driver version 0.8.5 [ 2.347141] cpuidle: using governor ladder [ 2.350827] cpuidle: using governor menu [ 2.356888] Netfilter messages via NETLINK v0.30. [ 2.360824] nf_conntrack version 0.5.0 (3494 buckets, 13976 max) [ 2.367478] ctnetlink v0.93: registering with nfnetlink. [ 2.371946] nf_conntrack_rtsp v0.7 loading [ 2.376038] ip_set: protocol 6 [ 2.379881] gre: GRE over IPv4 demultiplexor driver [ 2.383848] ip_gre: GRE over IPv4 tunneling driver [ 2.390721] nf_nat_rtsp v0.7 loading [ 2.393345] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.399281] TCP: cubic registered [ 2.403717] NET: Registered protocol family 10 [ 2.409934] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 2.414839] IPv6 over IPv4 tunneling driver [ 2.422086] NET: Registered protocol family 17 [ 2.425741] Bridge firewalling registered [ 2.429803] Ebtables v2.0 registered [ 2.433239] L2TP core driver, V2.0 [ 2.436488] PPPoL2TP kernel driver, V2.0 [ 2.440424] L2TP netlink interface [ 2.443798] 8021q: 802.1Q VLAN Support v1.8 [ 2.448172] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0 [ 2.455670] Registering SWP/SWPB emulation handler [ 2.460481] clock_late_init: Removing enables held for handed-off clocks [ 2.476132] ipq_nss_get_mac_addr: MAC[0]: ff:ff:ff:ff:ff:ff [ 2.480974] ipq_nss_get_mac_addr: MAC[1]: ff:ff:ff:ff:ff:ff [ 2.486472] ipq_nss_get_mac_addr: MAC[2]: ff:ff:ff:ff:ff:ff [ 2.492064] ipq_nss_get_mac_addr: MAC[3]: ff:ff:ff:ff:ff:ff [ 2.497532] no pmic restart interrupt specified [ 2.503498] msm_cache_dump_probe: could not register L2 buffer ret = -22. [ 2.513277] VFS: Mounted root (squashfs filesystem) readonly on device 254:0. [ 2.520024] Freeing init memory: 1032K ********************************************************************************* _ _ __ _ __ _____ __ __ _____ | | | || \ | | / // ____]\ \ / // ____]TM | | | || \ | | / /| (___ \ V /| (____ | | | || |\ \| |\ \ \____ \ \ / \____ \ | |_____ | || | \ | \ \ ____) | | | ____) | |_______||_||_| \__| \_\[____ / |_| [_____/ (c) 2013 Belkin International, Inc. and/or its affiliates. All rights reserved. Booting macan (firmware version 1.1.4.186518) ********************************************************************************* [utopia][init] System Initialization [utopia][init] Creating /proc [utopia][init] Creating /sys [utopia][init] Creating /dev [utopia][init] Creating /tmp [utopia][init] Allocating 50M for /tmp [utopia][init] Prepairing /dev/pts [utopia][init] Setting /tmp and /var permissions [utopia][init] Starting udev.. [ 3.171290] bdutil board utility kernel module, version 1.4 [ 3.176444] bdutil board utility kernel module boardId (0) [ 3.181318] bdutil board utility LEDs kernel module, version 1.3 Attempting mount of ubifs syscfg partition UBI device number 1, total 252 LEBs (31997952 bytes, 30.5 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB) [utopia][init] Using persistent syscfg data from /var/config/syscfg [utopia][init] Starting system logging [utopia][init] Starting sysevent subsystem [utopia][init] Enabling DesignWare USB3 DRD Core drivers [utopia][init] Loading QCA NSS and GMAC drivers net.netfilter.nf_conntrack_acct = 1 [utopia][init] Late loading usb drivers [utopia][init] Setting any unset system values to default [utopia][init] no persistence config file (/var/config/pstcfg) found setting up MAC addresses for all interface based on C0:56:27:39:AA:B0 NTP Servers do not need to be updated checking for interactive script start up... Updating BootCount Page[6]:3000 ... Done attempting to sync sysinfo.cgi auth credentials [utopia][init] Loading LEDS and Buttons drivers [utopia][init] Setup link to WiFi firmware and board data (EU) [utopia][init] Using EU region for WiFi firmware and board data NSS Auto scaling disabled dev.nss.ipv4cfg.ipv4_conn = 4096 dev.nss.ipv6cfg.ipv6_conn = 4096 inserting ecm.ko and fpbypass.ko for QCA Sat Mar 14 05:57:00 UTC 2020 macan login: wan, sysevent received: wan-start=NULL Lighttpd Model Base: EA7500 Generating Rainier lighttpd config Build temporary www configuration directory: TSLIIHauhEfGE wifi, sysevent received: lan-started (Sat Mar 14 06:57:05 CET 2020) wifi, service_start() Power cycle Ethernet ports. [utopia][init] Loading GMAC and WLAN drivers Registering Service myrouter._http._tcp.local port 80 Got a reply for myrouter._http._tcp.local.: Name now registered and active [utopia][init] Creating wifi devices ath0 ath1 [utopia][init] setting WiFi Red CE settings wifi, wifi_physical_start(ath0) wifi, setting obss rssi threshold (ath0) Auto channel wifi, wifi_virtual_start(ath0) wifi, wifi_user_start(ath0) wifi_user, ath0 TxBF enabled wifi, primary AP: ath0 is up wifi, wifi_guest_start(ath0) wifi, guest ath2 is disabled, do not start wifi guest wifi, wifi_physical_start(ath1) wifi, setting obss rssi threshold (ath1) wifi, wifi_virtual_start(ath1) wifi, wifi_user_start(ath1) Not ready for JNAP. Sleeping for 15 seconds... iwconfig: unknown command "5" wifi_user, ath1 TxBF enabled wifi_user, ath1 MU-MIMO enabled wifi, primary AP: ath1 is up wifi, wifi_guest_start(ath1) wifi, guest ath3 is disabled, do not start wifi guest wifi, start_hostapd() Configuration file: /tmp/hostapd-ath0.conf Configuration file: /tmp/hostapd-ath1.conf mediaserver got event: mediaserver-stop ath0: Could not connect to kernel driver Using interface ath0 with hwaddr c0:56:27:39:aa:b1 and ssid "Linksys" ath0: interface state UNINITIALIZED->ENABLED ath0: AP-ENABLED ath1: Could not connect to kernel driver Using interface ath1 with hwaddr c0:56:27:39:aa:b2 and ssid "Linksys 5" ath1: interface state UNINITIALIZED->ENABLED ath1: AP-ENABLED [utopia] Not setting ppp_clamp_mtu alljoyn service_init fastpath, sysevent received: qos_enabled Restarting nfqrecv service... net.bridge.bridge-nf-call-ip6tables = 1 net.bridge.bridge-nf-call-iptables = 1 dev.nss.general.redirect = 1 [utopia] Not setting ppp_clamp_mtu on dslite protocol udhcpc (v1.19.4) started wan, sysevent received: phylink_wan_state=up Sending discover... Sending discover... Sending select for 192.168.74.142... Lease of 192.168.74.142 obtained, lease time 43200 device_registration: Received event: wan-started Sat Mar 14 05:57:48 2020 xrac Device is not associated, exiting... data_uploader service started device_registration: Service started mediaserver got event: mediaserver-stop Starting smbd ... [fw.sh] fwup_checked_after_boot: 0 [fwupd] version: 1.1.5.190349 [fwupd] status details:"" [fw.sh] fwup_forced_update: 0 QoS auto-prioritize [info]: No networkID; skipping auto-priority update