Linksys E4200 v2
abgn (AN900) | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Maximum Performance Dual-Band N Router | |||||||||||||
Support | |||||||||||||
Wikipedia | |||||||||||||
InfoDepot Wiki | |||||||||||||
WikiDevi.wi-cat.ru | |||||||||||||
3rd Party Firmware | |||||||||||||
dd-wrt |
Not Supported | ||||||||||||
OpenWrt | |||||||||||||
Tomato any flavor |
Incompatible | ||||||||||||
Gargoyle |
Not Supported | ||||||||||||
Platform | |||||||||||||
Brand • Model • Rev |
Linksys E4200 v2 | ||||||||||||
Serial number prefix |
01C106, 01C116, 01C136 | ||||||||||||
FCC ID | |||||||||||||
IC ID | |||||||||||||
Type |
wireless router | ||||||||||||
CPU1 |
Marvell 88F6282 | ||||||||||||
CPU1 Type |
ARMv5 (ARMADA 300) | ||||||||||||
CPU1 Speed |
1.2 GHz | ||||||||||||
Flash1 Chip |
SK hynix H5PS1G63EFR-S6C | ||||||||||||
Flash1 Size |
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (NAND) | ||||||||||||
RAM1 Size |
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> | ||||||||||||
RAM1 Chip |
SK hynix H27U1G8F2BTR-BC | ||||||||||||
ETH chip1 |
Marvell 88F6282 | ||||||||||||
Switch |
Marvell 88E6171R | ||||||||||||
Ethernet Port Count |
1-1GbE-WAN 4-1GbE-LAN | ||||||||||||
Wired Standard |
IEEE 802.3i/3u/3ab | ||||||||||||
Stock bootloader |
U-Boot | ||||||||||||
Stock FW OS |
Linux | ||||||||||||
Expansion IF types |
USB 2.0 | ||||||||||||
USB ports |
1 | ||||||||||||
USB Hub Compatible |
Untested | ||||||||||||
Power |
12 VDC, 2 A | ||||||||||||
Connector type |
barrel | ||||||||||||
Serial Port (UART) |
yes, 6-pin header, (115200 8N1) | ||||||||||||
JTAG Port |
yes | ||||||||||||
Additional chips | |||||||||||||
Other | |||||||||||||
Default IP address: 192.168.1.1 | |||||||||||||
Manuf/OEM/ODM |
Wistron NeWeb RGWM04 .0GA | ||||||||||||
3rd Party Firmware Support | |||||||||||||
Retail | |||||||||||||
Availability | End of Life | ||||||||||||
FCC approval date | 22 September 2011 | ||||||||||||
UPC |
745883594900 (UPC DB, On eBay) | ||||||||||||
ASIN | B0068ALV8Q | ||||||||||||
Country of manuf | China | ||||||||||||
Radio 1 | |||||||||||||
Chip1 |
Marvell 88W8366 | ||||||||||||
Chip2 |
Marvell 88W8063 | ||||||||||||
Wireless interface OUI |
58:6D:8F, C0:C1:C0 | ||||||||||||
Antenna Connector Type |
U.FL | ||||||||||||
MIMO status |
3x3:3 | ||||||||||||
Wireless Standard |
IEEE 802.11b/g/n | ||||||||||||
802.11n |
up to 450 Mbps | ||||||||||||
802.11g |
up to 54 Mbps | ||||||||||||
802.11b |
up to 11 Mbps | ||||||||||||
WiFi Operating Frequency |
2.4 GHz | ||||||||||||
Radio 2 | |||||||||||||
Chip1 |
Marvell 88W8366 | ||||||||||||
Chip2 |
Marvell 88W8063 | ||||||||||||
Wireless interface OUI |
58:6D:8F, C0:C1:C0 | ||||||||||||
Antenna Connector Type |
U.FL | ||||||||||||
MIMO status |
3x3:3 | ||||||||||||
Wireless Standard |
IEEE 802.11a/n | ||||||||||||
802.11n |
up to 450 Mbps | ||||||||||||
802.11a |
up to 54 Mbps | ||||||||||||
WiFi Operating Frequency |
5 GHz | ||||||||||||
| |||||||||||||
|
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
For a list of all currently documented Linksys device with specifications, see Linksys.
Overview
"48RGWM04.0GA" and "Manufactured for CISCO" are silkscreened on the board.
- Wistron NeWeb is the OEM.
The same hardware appears to be used with the later model Linksys EA4500.
Links of Interest
Reviews
- On SmallNetBuilder (source for this page)
Forum threads
Blogs
- Hacking Linksys E4200v2 firmware (binwalk dump)
Firmware
- (based on and extending work from the following)
- Installing Debian on the Linksys E4200v2
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
On the OpenWrt Wiki
On the OpenWrt Forum
OpenWrt Target: kirkwood
OpenWrt Subtarget: generic
OpenWrt Package architecture: arm_xscale
Support started version: 15.05
Current supported version: 23.05.5
Unsupported Functions:
WPA3
Comment:
3x3, no DFS support
Please insert instructions here
JTAG-Serial Info
Serial
Serial Pinouts
The serial port is marked as J5 on the board. There are 6 pads in a row.
If you take pin 1 to be the square pad, you will find the following pinout:
P1 - ? P2 - ? P3 - RX P4 - ? P5 - TX P6 - GND
Pictures
- Linksys
- Embedded system/wireless router
- Embedded System Marvell
- Embedded System 88F6282
- Marvell
- Embedded System ARMv5
- Embedded System (ARMADA 300)
- Embedded System 88E6171R
- Manuf Wistron NeWeb
- OpenWrt Supported
- Embedded System 88W8366
- Embedded System 88W8063
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System IEEE 802.11a/n
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- Embedded System
- English Documentation