IIJ SA-W2
From TechInfoDepot
Jump to navigationJump to searchabgn+ac (AC1600) | |
|---|---|
| WiFi Router | |
| Homepage | |
| 3rd Party Firmware | |
| dd-wrt |
Status Unknown |
| OpenWrt | |
| Tomato any flavor |
Incompatible |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
IIJ SA-W2 |
| FCC ID |
none specified |
| Type |
wireless router |
| CPU1 |
Marvell 88F6810 |
| CPU1 Speed |
1.6 GHz |
| Flash1 Chip |
Brand? Model? |
| Flash1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
| RAM1 Size |
256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> |
| RAM1 Chip |
Brand? Model? |
| ETH chip1 |
Marvell 88F6810 |
| Switch |
Marvell 88E6172 |
| Ethernet Port Count |
1-1GbE-WAN 4-1GbE-LAN |
| Wired Standard |
IEEE 802.3i/3u/3ab |
|
802dot11 OUI: none specified | |
| Expansion IF types |
USB 2.0 |
| USB ports |
2 |
| USB Hub Compatible |
Untested |
| PoE |
802.3af, standard |
| Power |
12 VDC, 3 A |
| Connector type |
barrel |
| Serial Port (UART) |
yes, (115200 8N1) |
| Other | |
|
| |
| 3rd Party Firmware Support | |
| Radio 1 | |
| Chip1 |
Atheros AR9287 |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
none specified |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11b/g/n |
| 802.11n |
up to 300 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
| Radio 2 | |
| Chip1 |
Qualcomm Atheros QCA9880 |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
none specified |
| MIMO status |
3x3:3 |
| Wireless Standard |
IEEE 802.11a/n/ac |
| 802.11ac |
up to 1300 Mbps |
| 802.11n |
up to 450 Mbps |
| 802.11a |
up to 54 Mbps |
| WiFi Operating Frequency |
5 GHz |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
| Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
On the OpenWrt ToH (techdata entry)
OpenWrt Target: mvebu
OpenWrt Subtarget: cortexa9
OpenWrt Package architecture: arm_cortex-a9_vfpv3
Support started version: ?
Current supported version: snapshot
OpenWrt Target: mvebu
OpenWrt Subtarget: cortexa9
OpenWrt Package architecture: arm_cortex-a9_vfpv3
Support started version: ?
Current supported version: snapshot
Please insert instructions here
Categories:
- IIJ
- Embedded system/wireless router
- Embedded System Marvell
- Embedded System 88F6810
- Marvell
- Embedded System 88E6172
- OpenWrt Supported
- Embedded System Atheros
- Embedded System AR9287
- Atheros
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System Qualcomm Atheros
- Embedded System QCA9880
- Qualcomm Atheros
- Embedded System IEEE 802.11a/n/ac
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- Embedded System
- English Documentation
