IBoss Home Wireless G

bg (G54)
iBoss Home Parental Control Advanced Internet Content Filter and Wireless-G Router
WikiDevi.wi-cat.ru	IBoss Home Wireless G
3rd Party Firmware
dd-wrt	Incompatible
OpenWrt	Incompatible
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	iBoss HomeWireless G
FCC ID	NDD9562040507
Type	wireless router
CPU1	Realtek RTL8186
CPU1 Type	Lexra LX5280
CPU1 Speed	180 MHz
Flash1 Chip	Macronix MX29LV320CBTC-70G
Flash1 Size	4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br />
RAM1 Size	16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Chip	Mezza Z2V64S40DTP-G75
ETH chip1	Realtek RTL8186
Switch	Realtek RTL8305SC
Ethernet Port Count	1-WAN 4-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: 00:0E:2E (2 E, 12 W) Ethernet OUI: 00:0E:2E (2 E, 12 W)
Expansion IF types	none specified
Power	12 VDC, 1 A
Connector type	barrel
Other
Default SSID: iboss-XXXXXX Default IP address: 192.168.1.1 the IP 192.168.1.1 is used by 1324 additional devices of which 0 are iBoss devices
Manuf/OEM/ODM	Edimax BR-6204Wg v2
Retail
FCC approval date	16 August 2005
(Est.) release date	November 2007
(Est.) initial retail price (in USD):	$129.95
Country of manuf	China
Radio 1
Chip1	Realtek RTL8186
Chip2	Realtek RTL8225
Wireless interface OUI	00:0E:2E
Antenna Connector Type	RP-SMA
Wireless Standard	IEEE 802.11b/g
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
FCC ID CompUSA 54Mbps Wireless Broadband Router (333628) NDD9562040507 Edimax BR-6204Wg / BR-6304Wg / EW-7209APg v1 NDD9562040507

For a list of all currently documented Realtek chipsets with specifications, see Realtek.

• 54 Mbps - 2.4GHz 802.11g = G54 class

Overview

"1244-00000445-01Z Rev.A" is silkscreened on the board (or at least one board).

Per the manual, to reset the device to factory defaults...

• power off the unit
• reconnect the power
• upon connecting the power, wait for the power LED to start blinking, then wait for the power LED to go solid
• hold the reset button for 15 seconds
• release power button
• wait for up to 3 min

The FCC ID on the device label is NDD9562040507.. but it would seem that it should instead be NDD9562040608 (the FCC ID of the v2, which shares the same silkscreened text on the board).

The phantom-334455 SSID would seem to be relevant to this device..

Links of Interest

Product page (via archive.org)
Manual