Huawei AP6010DN-AGN
From TechInfoDepot
Jump to navigationJump to searchabgn (AN600) | |
|---|---|
| access point | |
| 3rd Party Firmware | |
| dd-wrt |
Status Unknown |
| OpenWrt | |
| Tomato any flavor |
Incompatible |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
Huawei AP6010DN-AGN |
| FCC ID | |
| IC ID | |
| Type |
access point |
| CPU1 | |
| CPU1 Type |
MIPS 74Kc |
| CPU1 Speed |
not specified 32-bit |
| Flash1 Chip |
Brand? Model? |
| Flash1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
| RAM1 Size |
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> |
| RAM1 Chip |
SK hynix Model? x 2 |
| ETH chip1 | |
| Ethernet Port Count |
1-1GbE-LAN |
| Wired Standard |
IEEE 802.3i/3u/3ab |
|
802dot11 OUI: none specified | |
| Stock bootloader |
U-Boot |
| Expansion IF types |
none specified |
| PoE |
802.3af, standard |
| Power |
12 VDC, 2 A |
| Connector type |
barrel |
| Serial Port (UART) |
yes, (9600 8N1) |
|
Flags: enterprise class | |
| Other | |
|
| |
| 3rd Party Firmware Support | |
| Retail | |
| FCC approval date | 05 November 2012 |
| Country of manuf | China |
| Radio 1 | |
| Chip1 | |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
none specified |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11b/g/n |
| 802.11n |
up to 300 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
| Radio 2 | |
| Chip1 |
Atheros AR9582 |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
U.FL |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11a/n |
| 802.11n |
up to 300 Mbps |
| 802.11a |
up to 54 Mbps |
| WiFi Operating Frequency |
5 GHz |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Huawei device with specifications, see Huawei.
Overview
This device is presumably using an AR9344 or similar Atheros WiSoC.
"H86D21D1D200 VER.B" appears to be silkscreened on the board in the FCC photos.
The 5GHz radio appears to be using two Skyworks SE5003L (/ SiGe 5003L) 5GHz power amplifiers. The 2.4GHz radio appears to be using two Skyworks SE2565T (/ SiGe 2565T) 2.4GHz power amplifiers.
Links of Interest
- 32MB Flash, 128MB RAM
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
| Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
On the OpenWrt ToH (techdata entry)
OpenWrt Target: ath79
OpenWrt Subtarget: generic
OpenWrt Package architecture: mips_24kc
Support started version: ?
Current supported version: snapshot
OpenWrt Target: ath79
OpenWrt Subtarget: generic
OpenWrt Package architecture: mips_24kc
Support started version: ?
Current supported version: snapshot
Please insert instructions here
Categories:
- Huawei
- Embedded system/access point
- Embedded System Atheros
- Embedded System AR9344
- Atheros
- Embedded System MIPS 74Kc
- Embedded System
- OpenWrt Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System AR9582
- Embedded System IEEE 802.11a/n
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- English Documentation
