Hewlett Packard Enterprise 560 (J9846A)

From TechInfoDepot
Jump to navigationJump to search
abgn+ac (AC1750)
access point
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Tomato any flavor
Incompatible
Gargoyle
Status Unknown
Platform
BrandModelRev
Hewlett Packard Enterprise 560 (J9846A)
FCC ID
none specified
Type
access point
CPU1
Freescale P1020
CPU1 Type
Power
CPU1 Speed
800 MHz ( 2 cores ) 32-bit
Flash1 Chip
Micron 2CA1
Flash1 Size
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (NAND)
RAM1 Size
256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (DDR3)
RAM1 Chip
Micron MT41J64M16JT-15E:G
ETH chip1
Freescale P1020
Ethernet Port Count
1-1GbE-LAN
Wired Standard
IEEE 802.3i/3u/3ab

802dot11 OUI: none specified

Expansion IF types
none specified
PoE
802.3at, standard
Power
? VDC, ? A
Other
3rd Party Firmware Support
OpenWrt • (List | Dev | DLs)
Radio 1
Chip1
Brand? Model?
Wireless interface OUI
none specified
Antenna Connector Type
none specified
MIMO status
3x3:3
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 450 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz
Radio 2
Chip1
Brand? Model?
Wireless interface OUI
none specified
Antenna Connector Type
none specified
MIMO status
3x3:3
Wireless Standard
IEEE 802.11a/n/ac
802.11ac
up to 1300 Mbps
802.11n
up to 450 Mbps
802.11a
up to 54 Mbps
WiFi Operating Frequency
5 GHz

For a list of all currently documented Freescale (NXP) SoC's with specifications, see Freescale.

For a list of all currently documented Hewlett Packard Enterprise device with specifications, see Hewlett Packard Enterprise.

1300 Mbps - 3SS 5GHz 802.11ac (80MHz chan.),
450 Mbps - 3SS 2.4GHz 802.11n (40MHz chan.) = AC1750 class

Flashing

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)
On the OpenWrt Forum
OpenWrt Target: mpc85xx
OpenWrt Subtarget: p1020
OpenWrt Package architecture: powerpc_8540
Support started version: ?
Current supported version: 23.05.5

Please insert instructions here