Hewlett Packard Enterprise 1920-24G (JG926A)
From TechInfoDepot
Jump to navigationJump to search3rd Party Firmware | |
---|---|
dd-wrt |
Status Unknown |
OpenWrt | |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
Hewlett Packard Enterprise 1920-24G |
Model part number |
JG926A |
CPU1 |
Realtek RTL8382M |
CPU1 Type |
MIPS 4KEc |
CPU1 Speed |
500 MHz |
Flash1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
RAM1 Size |
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> |
ETH chip1 |
Realtek RTL8382M |
ETH chip2 |
Realtek RTL8218B |
ETH chip3 |
Realtek RTL8218B |
ETH chip4 |
Realtek RTL8214FC |
Switch |
Realtek RTL8382M |
Ethernet Port Count |
24-1GbE |
Ethernet connector |
8P8C |
Wired Standard |
IEEE 802.3i/3u/3ab |
Auto-MDIX |
unspecified |
Switch Class |
managed |
Ethernet OUI: none specified | |
Expansion IF types |
SFP |
SFP ports |
4 |
Stock bootloader |
U-Boot |
PoE |
802.3at, standard |
Power |
100-240 VAC ~ 50/60 Hz, ? A |
Connector type |
C13 |
Serial Port (UART) |
yes, RS232, 38400 / 8N1 |
| |
3rd Party Firmware Support | |
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
For a list of all currently documented Hewlett Packard Enterprise device with specifications, see Hewlett Packard Enterprise.
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
OpenWrt Target: realtek
OpenWrt Subtarget: rtl838x
Support started version: ?
Current supported version: snapshot
On the OpenWrt Wiki
OpenWrt Target: realtek
OpenWrt Subtarget: rtl838x
Support started version: ?
Current supported version: snapshot
Please insert instructions here