Handlink AP-100

From TechInfoDepot
Jump to navigationJump to search
bgn (N300)
AP-100 Smart Wi-Fi Access Point
Homepage
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Status Unknown
Tomato any flavor
Incompatible
Platform
BrandModelRev
Handlink AP-100
FCC ID
Type
access point, CPE
CPU1
CPU1 Type
MIPS 74Kc
CPU1 Speed
560 MHz 32-bit
Flash1 Chip
Macronix MX25L6406EMI-12G
Flash1 Size
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br />
RAM1 Size
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br />
RAM1 Chip
EtronTech EM68A16CWQB-25H
ETH chip1
Ethernet Port Count
1-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: none specified

Expansion IF types
none specified
PoE
non-standard (otherwise unspecified)
Power
18 VDC, 0.66 A
Connector type
Ethernet (PoE)
Flags:
hg directional
Other

Default SSID: Superwifi Network X
Default IP address: 10.59.100.1
Default login user: admin
Default login password: admin
admin:admin credentials used by 1330 additional devices
of which 2 are Handlink devices

Manuf/OEM/ODM
Retail
FCC approval date 17 October 2013
Country of manuf Taiwan
Radio 1
Chip1
Wireless interface OUI
none specified
Antenna Connector Type
none specified
MIMO status
2x2:2
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 300 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz
 FCC ID
Altai WA1011N-G (C1n)UCC-WA1011N-G
TWS-AP-100

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.

300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class


Overview

"M01-"????"-X01" appears to be silkscreened on the board in the FCC photos.

CPU: Atheros AR9344-BC2A
RAM: EtronTech EM68A16CWQB-25H / Winbond W9725G6JB-25

This device is using two Skyworks ( / SiGe) SE2576L / 2576L 2.4GHz Power Amplifier modules.

The hardware of this device would appear to be the same (or very similar to) that of the Altai C1n Super WiFi CPE/AP.

Default settings are per the FCC manual.

The default SSID format is stated to be Superwifi Network + a space + a number between 0 and 7.
A 00:19:BE (Altai) OUI is shown as being used within the manual..