GlobalScale ESPRESSObin v5
From TechInfoDepot
Jump to navigationJump to search| single-board computer | |||||||||||||||||
| Homepage | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3rd Party Firmware | |||||||||||||||||
| dd-wrt | |||||||||||||||||
| OpenWrt | |||||||||||||||||
| Tomato any flavor |
Incompatible | ||||||||||||||||
| Gargoyle |
Status Unknown | ||||||||||||||||
| Platform | |||||||||||||||||
| Brand • Model • Rev |
GlobalScale ESPRESSObin v5 | ||||||||||||||||
| Type |
single-board computer | ||||||||||||||||
| CPU1 |
Marvell 88F3720 | ||||||||||||||||
| CPU1 Type |
ARMv8 Cortex-A53 | ||||||||||||||||
| CPU1 Speed |
1.0 GHz ( 2 cores ) | ||||||||||||||||
| Flash1 Chip |
Winbond Model? | ||||||||||||||||
| Flash1 Size |
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> | ||||||||||||||||
| RAM1 Size |
2 GiB 2,048 MiB <br />2,147,483,648 B <br />16,777,216 Kib <br />2,097,152 KiB <br />16,384 Mib <br /> | ||||||||||||||||
| RAM1 Chip |
Micron MT41K512M16HA-107 x 2 | ||||||||||||||||
| ETH chip1 |
Marvell 88F3720 | ||||||||||||||||
| Switch |
Marvell 88E6341 | ||||||||||||||||
| Ethernet Port Count |
1-1GbE-WAN 2-1GbE-LAN | ||||||||||||||||
| Wired Standard |
IEEE 802.3i/3u/3ab | ||||||||||||||||
|
| |||||||||||||||||
| Stock bootloader |
U-Boot 2015.01 armada-17.02.0-g8128e91 | ||||||||||||||||
| Stock FW OS |
Linux 4.4.8 Buildroot | ||||||||||||||||
| Expansion IF types |
USB 3.0, USB 2.0, Mini PCIe, SATA 3.0, Micro SD Card slot | ||||||||||||||||
| Mini PCIe slots |
1 | ||||||||||||||||
| USB ports |
2 | ||||||||||||||||
| SD/MMC Slots |
1 | ||||||||||||||||
| SATA Ports |
1 | ||||||||||||||||
| USB Hub Compatible |
Untested | ||||||||||||||||
| Power |
12 VDC, 2 A | ||||||||||||||||
| Connector type |
barrel | ||||||||||||||||
| Serial Port (UART) |
yes, microUSB, (115200 8N1), | ||||||||||||||||
| JTAG Port |
yes, 10-pin header, populated, J2 | ||||||||||||||||
|
Additional chips | |||||||||||||||||
| Other | |||||||||||||||||
|
| |||||||||||||||||
| 3rd Party Firmware Support | |||||||||||||||||
| Retail | |||||||||||||||||
| (Est.) release date | June 2017 | ||||||||||||||||
| (Est.) initial retail price (in USD): | $79 | ||||||||||||||||
| ASIN |
B06Y3V2FBK  | ||||||||||||||||
| |||||||||||||||||
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
For a list of all currently documented GlobalScale device with specifications, see GlobalScale.
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram. DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 4/32 warning for details. |
| This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now. |
| OpenWrt support for this device has ended in 2022. 19.07.10 was the last official build for 4/32 devices. |
On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
OpenWrt Target: mvebu
OpenWrt Subtarget: cortexa53
OpenWrt Package architecture: aarch64_cortex-a53
Support started version: 18.06.0
Current supported version: 23.05.5
On the OpenWrt Wiki
OpenWrt Target: mvebu
OpenWrt Subtarget: cortexa53
OpenWrt Package architecture: aarch64_cortex-a53
Support started version: 18.06.0
Current supported version: 23.05.5
Please insert instructions here
