Gemtek WHRTC-100GW

bg (G54)
Home Plug Wireless 802.11g Router
Homepage	Product page
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Incompatible
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	Gemtek WHRTC-100GW
FCC ID	MXF-HR930819G
Type	wireless router, Powerline Access Point
CPU1	Broadcom BCM4712
CPU1 Type	MIPS BMIPS3300
CPU1 Speed	200 MHz
CPU2	Conexant CX90010-11
Flash1 Chip	Intel TE28F160C3BD70
Flash1 Size	2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br />
RAM1 Size	? MiB
RAM1 Chip	Brand? Model?
ETH chip1	Broadcom BCM4712
Switch	Marvell 88E6063
Ethernet Port Count	1-WAN 4-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: none specified
Expansion IF types	none specified
Power	110-120 VAC ~ 50/60 Hz, 0.1 A
Connector type	C7
Flags: HomePlug 1.0
Other
Default SSID: default (101 addl. devices) Default IP address: 10.0.0.2 the IP 10.0.0.2 is used by 9 additional devices of which 0 are Gemtek devices Default login user: admin Default login password: admin admin:admin credentials used by 1340 additional devices of which 2 are Gemtek devices
Manuf/OEM/ODM	Gemtek
Retail
FCC approval date	28 December 2004
Radio 1
Chip1	Broadcom BCM4712
Chip2	Broadcom BCM2050
Wireless interface OUI	none specified
Antenna Connector Type	none specified
Wireless Standard	IEEE 802.11b/g
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
Radio cor_rev	7
FCC ID TRENDnet TPL-111BR RYK-WHRB100 MXF-HR930819G

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Conexant chipsets with specifications, see Conexant.
For a list of all currently documented Marvell chipsets with specifications, see Marvell.

For a list of all currently documented Gemtek device with specifications, see Gemtek.

• 54 Mbps - 2.4GHz 802.11g = G54 class

Overview

"WHRTC-100GW_V03" and "ENG-103-8603" is silkscreened on the board in the FCC photos.

This device is using a SiGe SE2525L 2.4GHz power amplifier.

Default settings are per the FCC manual. They very well may be completely wrong.

The WWW interface's realm is noted as Wireless + HomePlug Design in the IE password prompt box for the web UI.

Links of Interest

Spec.