Fortinet FortiAP-221B (FAP-221B)
From TechInfoDepot
Jump to navigationJump to searchabgn (AN600) | |
|---|---|
| access point | |
| WikiDevi.wi-cat.ru | |
| 3rd Party Firmware | |
| dd-wrt |
Status Unknown |
| OpenWrt | |
| Tomato any flavor |
Incompatible |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
Fortinet FAP-221B |
| FCC ID | |
| IC ID | |
| Type |
access point |
| CPU1 | |
| CPU1 Type |
MIPS 74Kc |
| CPU1 Speed |
560 MHz 32-bit |
| Flash1 Chip |
Macronix MX25L12845EMI-10G |
| Flash1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
| RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
| RAM1 Chip |
Winbond W9725G6JB-25 x 2 |
| ETH chip1 | |
| ETH chip2 |
Atheros AR8035-A |
| Ethernet Port Count |
1-1GbE-LAN |
| Wired Standard |
IEEE 802.3i/3u/3ab |
|
802dot11 OUI: none specified | |
| Stock bootloader |
U-Boot |
| Expansion IF types |
none specified |
| PoE |
802.3af, standard |
| Power |
12 VDC, 1.25 A |
| Connector type |
barrel |
| Serial Port (UART) |
yes, 3.3, (9600 8N1) |
| Other | |
|
| |
| Manuf/OEM/ODM | |
| 3rd Party Firmware Support | |
| Retail | |
| Availability | End of Life |
| FCC approval date | 06 January 2012 |
| UPC |
094922335579 (UPC DB, On eBay) |
| ASIN |
B00AM2NI14  |
| Country of manuf | Taiwan |
| Radio 1 | |
| Chip1 | |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
U.FL |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11b/g/n |
| 802.11n |
up to 300 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
| Radio 2 | |
| Chip1 |
Atheros AR9382 |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
U.FL |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11a/n |
| 802.11n |
up to 300 Mbps |
| 802.11a |
up to 54 Mbps |
| WiFi Operating Frequency |
5 GHz |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Fortinet device with specifications, see Fortinet.
Overview
"FAP-221B-0.30 LFP" is silkscreened on the board.
This device shares the same hardware as the Proxim ORINOCO AP-8100.
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 8MB FLASH / 64MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 8/64 warning for details. This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that you will not be able to install many packages, and that you might experience crashes due to OOM situations more or less often. See OpenWrt on 8/64 devices what you can do now. |
On the OpenWrt ToH (techdata entry)
OpenWrt Target: ath79
OpenWrt Subtarget: generic
OpenWrt Package architecture: mips_24kc
Support started version: 23.05.0
Current supported version: 23.05.5
OpenWrt Target: ath79
OpenWrt Subtarget: generic
OpenWrt Package architecture: mips_24kc
Support started version: 23.05.0
Current supported version: 23.05.5
Please insert instructions here
Categories:
- Fortinet
- Embedded system/access point
- Embedded System Atheros
- Embedded System AR9344
- Atheros
- Embedded System MIPS 74Kc
- Embedded System
- Embedded System AR8035-A
- Manuf Senao
- OpenWrt Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System AR9382
- Embedded System IEEE 802.11a/n
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- English Documentation
