Extreme Networks WS-AP3935e
From TechInfoDepot
Jump to navigationJump to searchabgn+ac (AC2600) | |
---|---|
802.11ac Wave 2 Indoor Access Point | |
Support | |
3rd Party Firmware | |
dd-wrt |
Status Unknown |
OpenWrt | |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
Extreme Networks WS-AP3935e |
FCC ID |
none specified |
Type |
access point |
CPU1 |
Qualcomm Atheros IPQ8068 |
CPU1 Type |
ARMv7 Cortex-A15 |
CPU1 Speed |
1.4 GHz ( 2 cores ) |
Flash1 Chip |
Macronix MX30UF4G28AB |
Flash1 Size |
512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (NAND) |
Flash2 Chip |
Spansion S25FL256S1 |
Flash2 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (NOR) |
RAM1 Size |
512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> |
RAM1 Chip |
Nanya NT5CC256M16DP-DI |
ETH chip1 |
Qualcomm Atheros IPQ8068 |
ETH chip2 |
Atheros AR8035 |
ETH chip3 |
Atheros AR8033 |
Ethernet Port Count |
2-1GbE-LAN |
Wired Standard |
IEEE 802.3i/3u/3ab |
802dot11 OUI: none specified | |
Stock bootloader |
U-Boot |
Expansion IF types |
none specified |
PoE |
802.3at, 802.3af, standard |
Power |
12 VDC, 1 A |
Connector type |
barre |
Serial Port (UART) |
yes, 3.3, (115200 8N1) |
Other | |
| |
3rd Party Firmware Support | |
Radio 1 | |
Chip1 |
Qualcomm Atheros QCA9990 |
Wireless interface OUI |
none specified |
Antenna Connector Type |
none specified |
MIMO status |
4x4:4 |
Wireless Standard |
IEEE 802.11b/g/n |
N-QAM |
up to 800 Mbps |
802.11n |
up to 600 Mbps |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
Radio 2 | |
Chip1 |
Qualcomm Atheros QCA9990 |
Wireless interface OUI |
none specified |
Antenna Connector Type |
none specified |
MIMO status |
4x4:4 |
Wireless Standard |
IEEE 802.11a/n/ac |
802.11ac |
up to 1733 Mbps |
802.11n |
up to 600 Mbps |
802.11a |
up to 54 Mbps |
WiFi Operating Frequency |
5 GHz |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.
For a list of all currently documented Extreme Networks device with specifications, see Extreme Networks.
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
On the OpenWrt ToH (techdata entry)
OpenWrt Target: ipq806x
OpenWrt Subtarget: generic
OpenWrt Package architecture: arm_cortex-a15_neon-vfpv4
Support started version: ?
Current supported version: snapshot
OpenWrt Target: ipq806x
OpenWrt Subtarget: generic
OpenWrt Package architecture: arm_cortex-a15_neon-vfpv4
Support started version: ?
Current supported version: snapshot
Please insert instructions here
Categories:
- Extreme Networks
- Embedded system/access point
- Embedded System Qualcomm Atheros
- Embedded System IPQ8068
- Qualcomm Atheros
- Embedded System ARMv7
- Embedded System Cortex-A15
- Embedded System AR8035
- Embedded System Atheros
- Atheros
- Embedded System AR8033
- OpenWrt Supported
- Embedded System QCA9990
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System IEEE 802.11a/n/ac
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- Embedded System
- English Documentation