Extreme Networks WS-AP3915i
From TechInfoDepot
Jump to navigationJump to searchabgn+ac (AC1200) | |
---|---|
EEE 802.11ac 1.20 Gbit/s Wireless Access Point | |
Homepage | |
Support | |
3rd Party Firmware | |
dd-wrt |
Status Unknown |
OpenWrt | |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
Extreme Networks WS-AP3915i |
FCC ID |
none specified |
Type |
access point |
CPU1 |
Qualcomm IPQ4029 |
CPU1 Type |
ARMv7 Cortex-A7 |
CPU1 Speed |
716 MHz ( 4 cores ) |
Flash1 Chip |
Macronix MX25L25635E |
Flash1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (SPI NOR) |
RAM1 Size |
512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (DDR3) |
RAM1 Chip |
Brand? Model? |
ETH chip1 |
Qualcomm IPQ4029 |
Ethernet Port Count |
1-1GbE-LAN |
Wired Standard |
IEEE 802.3i/3u/3ab |
802dot11 OUI: none specified | |
Stock bootloader |
U-Boot |
Expansion IF types |
none specified |
PoE |
802.3af, standard |
Power |
12 VDC, 1 A |
Serial Port (UART) |
yes |
Other | |
| |
3rd Party Firmware Support | |
Retail | |
(Est.) release date | 27 July 2021 |
Newegg | 9SIAJZYFDD6322 |
Radio 1 | |
Chip1 |
Qualcomm IPQ4029 |
Wireless interface OUI |
none specified |
Antenna Connector Type |
none specified |
MIMO status |
2x2:2 |
Wireless Standard |
IEEE 802.11b/g/n |
802.11n |
up to 300 Mbps |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
Radio 2 | |
Chip1 |
Qualcomm IPQ4029 |
Wireless interface OUI |
none specified |
Antenna Connector Type |
none specified |
MIMO status |
2x2:2 |
Wireless Standard |
IEEE 802.11a/n/ac |
802.11ac |
up to 867 Mbps |
802.11n |
up to 300 Mbps |
802.11a |
up to 54 Mbps |
WiFi Operating Frequency |
5 GHz |
For a list of all currently documented Qualcomm chipsets with specifications, see Qualcomm.
For a list of all currently documented Extreme Networks device with specifications, see Extreme Networks.
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
On the OpenWrt ToH (techdata entry)
On the OpenWrt Forum
OpenWrt Target: ipq40xx
OpenWrt Subtarget: generic
OpenWrt Package architecture: arm_cortex-a7_neon-vfpv4
Support started version: 23.05.0
Current supported version: 23.05.5
On the OpenWrt Forum
OpenWrt Target: ipq40xx
OpenWrt Subtarget: generic
OpenWrt Package architecture: arm_cortex-a7_neon-vfpv4
Support started version: 23.05.0
Current supported version: 23.05.5
Please insert instructions here
Categories:
- Extreme Networks
- Embedded system/access point
- Embedded System Qualcomm
- Embedded System IPQ4029
- Qualcomm
- Embedded System ARMv7
- Embedded System Cortex-A7
- OpenWrt Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System IEEE 802.11a/n/ac
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- Embedded System
- English Documentation