EnGenius ESR1750

From TechInfoDepot
Jump to navigationJump to search
abgn+ac (AC1750)
Dual Band Wireless AC1750 Router
with Gigabit Ports, USB, Quantum Beam, and EnShare
ESR1750.png
Homepage
WikiDevi.wi-cat.ru
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Tomato any flavor
Incompatible
Gargoyle
Status Unknown
Platform
BrandModelRev
EnGenius ESR1750
FCC ID
IC ID
Type
wireless router
CPU1
Qualcomm Atheros QCA9558
CPU1 Type
MIPS 74Kc
CPU1 Speed
720 MHz
Flash1 Chip
Macronix MX25L12845EMI-10G
Flash1 Size
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Size
256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br />
RAM1 Chip
Nanya NT5TU64M16DG-AC x 2
ETH chip1
Qualcomm Atheros QCA9558
Switch
Qualcomm Atheros QCA8337N
Ethernet Port Count
1-1GbE-WAN
4-1GbE-LAN
Wired Standard
IEEE 802.3i/3u/3ab

802dot11 OUI: 88:DC:96 (20 E, 20 W)
Ethernet OUI: 88:DC:96 (20 E, 20 W)

Stock bootloader
U-Boot 1.0.0
Stock FW OS
Linux 2.6.31 LSDK-10.1.45
Expansion IF types
USB 2.0, Mini PCIe
Mini PCIe slots
1
USB ports
1
USB Hub Compatible
Untested
Power
12 VDC, 1.5 A
Connector type
barrel
Serial Port (UART)
yes, 4-pin header; 3.3V TTL, (115200 8N1)

Additional chips
2.4GHz High-Power High-Gain Power Amplifier;Silicon Storage Technology;SST12LP15A;;3;
3A, 23V Step-Down Converter;M3Tek;IT76630M;;1;

Other

Default SSID: EnGeniusXXXXX
Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 795 additional devices
of which 27 are EnGenius devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1332 additional devices
of which 50 are EnGenius devices

Manuf/OEM/ODM
3rd Party Firmware Support
OpenWrt • (List | Dev | DLs)
Retail
Availability End of Life
End of Life date 2015
FCC approval date 27 December 2013
(Est.) release date August 2013
UPC 655216006447
(UPC DB, On eBay)
ASIN B00E5CL6HK Flag of the United States.svg
Country of manuf Taiwan
Radio 1
Chip1
Qualcomm Atheros QCA9558
Wireless interface OUI
88:DC:96
Antenna Connector Type
U.FL
MIMO status
3x3:3
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 450 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz
Radio 2
Radio2 module
Radio2 module IF
Mini PCIe
Chip1
Qualcomm Atheros QCA9880-BR4A
Wireless interface OUI
88:DC:96
Antenna Connector Type
U.FL
MIMO status
3x3:3
Wireless Standard
IEEE 802.11a/n/ac
802.11ac
up to 1300 Mbps
802.11n
up to 450 Mbps
802.11a
up to 54 Mbps
WiFi Operating Frequency
5 GHz
 FCC ID
EnGenius ESR1200A8JESR1200
 FCC ID
EnGenius ESR900A8JESR900

For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.

For a list of all currently documented EnGenius device with specifications, see EnGenius.

1300 Mbps - 3SS 5GHz 802.11ac (80MHz chan.),
450 Mbps - 3SS 2.4GHz 802.11n (40MHz chan.) = AC1750 class

Overview

"ESR1750-0.20 LFP" is silkscreened on the mainboard in the FCC photos.

"PAC3300-0.20 LFP 94V-0 1343" is silkscreened on the wireless module.

The FCC ID on the label on at least some of these devices appears to be A8JESR900 <??>.

The newer A8JESR1750 FCC ID was issued before the end of 2013.

The filings for this FCC ID do indeed mention the ESR1750 and ESR1200 within the test report...

but only 802.11n (and lower) rates seem to be tested (there is no mention of 80MHz / VHT modes)
and the photos cover the ESR900 only (w/ its 3x3 11an AR9580 radio).

Additional specifications, per EnGenius's product page, follow...

  • Weight: 0.5 lbs
  • Diameter: 6.36"
  • Height: 1.64"

Default settings (including the SSID formats and the presumed used 88:DC:96 OUI) are per the FCC sample label.

Links of Interest

Reviews

- 2.4 GHz Power Amp SST 12LP15A (x3)
- 5 GHz Power Amp marked 15E37TV (x3)

Additional external links

Flashing

Flashing dd-wrt

Supported by dd-wrt as of = ?

Please insert instructions here

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
Support started version: 14.07
Current supported version: 18.06.9

Please insert instructions here

JTAG-Serial Info

Serial

Bootlog

U-Boot 1.0.0 (May 23 2013 - 17:15:24)
Product Name: ESR1200_1750
ap136 - Scorpion 1.0
DRAM:256 MB
Now running in RAM - U-Boot at: 8ffc8000
Flash Manuf Id 0xc2, DeviceId0 0x20, DeviceId1 0x18
Flash size 16MB, sector count = 256
In:    serial
Out:   serial
Err:   serial
reset_switch:
reset_usb:
Multi Net:

ath_gmac_enet_initialize...
athrs_sgmii_res_cal: cal value = 0xe
No valid address in Flash. Using fixed address
ath_gmac_enet_initialize: reset mask:c02200
Scorpion  ----> S17 PHY *
: cfg1 0x80000000 cfg2 0x7114
eth0: 00:03:7f:09:0b:ad
athrs17_reg_init: SUPPORT_QCA8337
athrs17_reg_init: QCA8337 ID=1302
athrs17_reg_init: complete
eth0 up
eth0
athrs17_disable_all_port
Setting 0x18116290 to 0x60c0214f

Please choose the operation:
   1: Load system code to SDRAM via TFTP.
   3: Boot system code via Flash (default).
 0

3: System Boot system code via Flash.
athrs17_set_portvlan_isolated complete
## Booting image at 9f040000 ...
   Image Name:   Linux Kernel Image
   Created:      2013-08-15   6:59:16 UTC
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    1867435 Bytes =  1.8 MB
   Load Address: 80002000
   Entry Point:  802ad4d0
   Verifying Checksum at 0x9f040040 ...OK
   Uncompressing Kernel Image ... OK

Starting kernel ...

Booting QCA955x
init started: BusyBox v1.7.5 (2013-08-15 14:50:11 CST)
starting pid 807, tty '/dev/console': '/sbin/config_init'
mknod: /dev/ttyS0: File exists
mknod: /dev/ttyS1: File exists
Config Init version: 1.1.0.23 date: 2013/08/15
Tue Jan  1 00:00:00 UTC 2013
ln: /lib/./modules: File exists
starting pid 867, tty '/dev/ttyS0': '/sbin/config_term'
[sysUtil] Hardware ID - 01010062
[sysUtil] Load vendor[1] information

************************************************************************
*                                  ESR1750                             *
************************************************************************

KernelApp/Ramdisk Ver:1.1.0.23                   Date:2013/08/15
password: