EnGenius ECB9500
From TechInfoDepot
Jump to navigationJump to searchbgn (N300) | |||||
---|---|---|---|---|---|
Wireless N 300Mbps Access Point/Bridge/Repeater/Router with Gigabit and 802.3af PoE | |||||
Homepage | |||||
InfoDepot Wiki | |||||
3rd Party Firmware | |||||
dd-wrt | |||||
OpenWrt |
Status Unknown | ||||
Tomato any flavor |
Incompatible | ||||
Gargoyle |
Status Unknown | ||||
Platform | |||||
Brand • Model • Rev |
EnGenius ECB9500 | ||||
FCC ID | |||||
IC ID | |||||
Board ID |
7016A0193020 | ||||
Type |
access point, bridge, repeater | ||||
CPU1 |
Ralink RT2880 | ||||
CPU1 Type |
MIPS 4KEc | ||||
CPU1 Speed |
266 MHz | ||||
Flash1 Chip |
STMicro M29W64DFT | ||||
Flash1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> | ||||
RAM1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> | ||||
RAM1 Chip |
EtronTech EM639165TS-6G x 2 | ||||
ETH chip1 |
Ralink RT2880 | ||||
ETH chip2 |
Marvell 88E1116 | ||||
Ethernet Port Count |
1-1GbE-LAN | ||||
Wired Standard |
IEEE 802.3/3u/3ab | ||||
Stock bootloader |
U-Boot 1.1.3 | ||||
Stock FW OS |
Linux 2.4.30 | ||||
Expansion IF types |
none specified | ||||
PoE |
802.3af, standard | ||||
Power |
12 VDC, 1 A | ||||
Connector type |
barrel | ||||
Serial Port (UART) |
yes, 6-pin header, (57600 8N1), 3.3V TTL | ||||
Other | |||||
Default IP address: 192.168.1.2 | |||||
Manuf/OEM/ODM |
Senao ECB-9750 | ||||
3rd Party Firmware Support | |||||
Retail | |||||
FCC approval date | 07 July 2009 | ||||
UPC |
655216003804 (UPC DB, On eBay) | ||||
ASIN | B001UHPR1O | ||||
Country of manuf | Taiwan | ||||
Radio 1 | |||||
Chip1 |
Ralink RT2880 | ||||
Chip2 |
Ralink RT2820 | ||||
Wireless interface OUI |
00:02:6F | ||||
Antenna Connector Type |
U.FL, RP-TNC | ||||
MIMO status |
2x3:2 | ||||
Wireless Standard |
IEEE 802.11b/g/n | ||||
802.11n |
up to 300 Mbps | ||||
802.11g |
up to 54 Mbps | ||||
802.11b |
up to 11 Mbps | ||||
WiFi Operating Frequency |
2.4 GHz | ||||
|
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
For a list of all currently documented EnGenius device with specifications, see EnGenius.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Overview
"ECB-9750-1.20 LFP" and "7016A0193020" is silkscreened
- on the board in the FCC photos (Senao).
The default SSID may be EnGeniusXXXXXX.
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing dd-wrt
DD-WRT Activation Required. |
Supported by dd-wrt as of = ECB9750 build - 25.12.08
Please insert instructions here
Pictures
Categories:
- EnGenius
- Embedded system/access point
- Embedded system/bridge
- Embedded system/repeater
- Embedded System Ralink
- Embedded System RT2880
- Ralink
- Embedded System MIPS 4KEc
- Embedded System
- Embedded System 88E1116
- Embedded System Marvell
- Marvell
- Manuf Senao
- DD-WRT Supported
- Embedded System RT2820
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- DD-WRT Activation Required
- English Documentation