EnGenius EAP900

abgn (AN900)
Dual Band N900 Indoor Access Point
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Status Unknown
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	EnGenius EAP900
FCC ID	A8J-EAP900
IC ID	10103A-EAP900
Type	access point
CPU1	Qualcomm Atheros QCA9558
CPU1 Type	MIPS 74Kc
CPU1 Speed	720 MHz
Flash1 Chip	Macronix Model?
Flash1 Size	? MiB
RAM1 Size	128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br />
RAM1 Chip	Nanya NT5TU32M16DG-AC x 2
ETH chip1	Qualcomm Atheros QCA9558
ETH chip2	Atheros AR8035-A
Ethernet Port Count	1-1GbE-LAN
Wired Standard	IEEE 802.3i/3u/3ab
802dot11 OUI: 88:DC:96 (20 E, 21 W) Ethernet OUI: 88:DC:96 (20 E, 21 W)
Expansion IF types	none specified
PoE	802.3af, standard
Power	12 VDC, 2 A
Connector type	barrel
Other
Default SSID: EnGeniusXXXXXX-2.4G (2 addl. devices) , EnGeniusXXXXXX-5G (2 addl. devices) Default IP address: 192.168.1.1 the IP 192.168.1.1 is used by 1324 additional devices of which 21 are EnGenius devices Default login user: admin Default login password: admin admin:admin credentials used by 1342 additional devices of which 50 are EnGenius devices
Manuf/OEM/ODM	Senao
Retail
FCC approval date	25 September 2013
Country of manuf	Taiwan
Radio 1
Chip1	Qualcomm Atheros QCA9558
Wireless interface OUI	88:DC:96
Antenna Connector Type	U.FL
MIMO status	3x3:3
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 450 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
Radio 2
Radio2 module	EnGenius EMP5608H
Radio2 module IF	Mini PCIe (oversized)
Chip1	Atheros AR9580
Wireless interface OUI	88:DC:96
Antenna Connector Type	U.FL
MIMO status	3x3:3
Wireless Standard	IEEE 802.11a/n
802.11n	up to 450 Mbps
802.11a	up to 54 Mbps
WiFi Operating Frequency	5 GHz

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.

For a list of all currently documented EnGenius device with specifications, see EnGenius.

• 450 Mbps - 3SS 5GHz 802.11n (40MHz chan.),

• 450 Mbps - 3SS 2.4GHz 802.11n (40MHz chan.) = AN900 class

Overview

Per the FCC photos...

• "EAP900-0.30 LFP" is silkscreened on the main board.
  • The 2G radio is using three Skyworks (SiGe) SE2576L / 2576L 2.4GHz PAMs.
• "EMP5608H" and "0.20 LFP" is silkscreened on the 5G wireless module.
  • The 5G module is using three Skyworks (SiGe) SE5003L / 5003L 5GHz PAMs
• This device appears to be using QCA9558-AT4A.
• The power adapter shown in a Powertron Electronics Corp. PA1024-2HUB / PA1024-120HUB200 (100-240VAC ~ 50-60 Hz, 0.6A -> 12VDC, 2.0A - 24W max.).

An additional model of EAP900H (noted as a high-power model) is referenced in the FCC docs.

The FCC docs note the tested model as EAP900. The devices are stated to be electrically identical and differing only in name for marketing purpose (hmm..).

Default settings are per the FCC manual.

Default SSID patterns are shown as EnGeniusXXXXXX-2.4G and EnGeniusXXXXXX-5G. This is presumed to be correct.

The manual shows 88:DC:96 OUIs in use. Again, it's presumed to be in use.