Embarq EQ-660R
From TechInfoDepot
Jump to navigationJump to searchEQ-660R ADSL Router | |
WikiDevi.wi-cat.ru | |
---|---|
3rd Party Firmware | |
dd-wrt | |
OpenWrt |
Incompatible |
Tomato any flavor |
Incompatible |
Platform | |
Brand • Model • Rev |
Embarq EQ-660R |
Type |
dsl modem |
CPU1 | |
CPU1 Type |
MIPS 4KEc |
CPU1 Speed |
212 MHz |
Flash1 Chip |
Macronix MX29LV160CBTC-70G |
Flash1 Size |
2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> |
RAM1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
RAM1 Chip |
Winbond W9864G6GH-7 |
ETH chip1 | |
Ethernet Port Count |
1-100MbE-LAN |
Wired Standard |
IEEE 802.3i/3u |
Stock bootloader |
Bootbase V1.03 |
Stock FW OS |
ZyNOS V3.40(ACZ.8) |
Expansion IF types |
none specified |
Power |
9 VAC ~ ? Hz, 1 A |
Connector type |
barrel |
Serial Port (UART) |
yes, internal, 5-pin header, populated, 3.3V TTL, (9600 8N1), J1 |
Other | |
| |
Manuf/OEM/ODM | |
Retail | |
(Est.) release date | July 2007 |
ASIN | B002YBK9FY |
Country of manuf | China |
For a list of all currently documented Texas Instruments (TI) chipsets with specifications, see Texas Instruments.
Overview
The ZyXEL logo, "45-401-000471", "Made in China", and a date code of 0722 is silkscreened on one EQ-660R's board.
JTAG-Serial Info
Serial
Serial Pinouts
The same pinout is used by the ZyXEL HomeSafe 100W (HS-100W).
[3.3] (TxD) (RxD) (GND) J1
Credentials
The default console password is 1234.
Boot log w/ reset
Bootbase Version: V1.03 | 05/25/2005 03:15:00 RAM: Size = 16384 Kbytes FLASH: AMD 16M *1 ZyNOS Version: V3.40(ACZ.8) | 06/11/2007 20:38:00 Press any key to enter debug mode within 3 seconds. ............................................................ Restore default Romfile............. Console speed will be changed to 9600 bps Copyright (c) 1994 - 2004 ZyXEL Communications Corp. initialize ch = 0, ethernet address: 00:19:cb:28:32:40 Wan Channel init ........ done ................................................................................................... done Press ENTER to continue...