Edge-corE OAP100

abgn+ac (AC1200)
Outdoor Wi-Fi 5 Access Point
Homepage	Product page
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Partial Support
Tomato any flavor	Incompatible
Gargoyle	Status Unknown
Platform
Brand • Model • Rev	Edge-corE OAP100
FCC ID	none specified
Type	access point
CPU1	Qualcomm IPQ4019
CPU1 Type	ARMv7 Cortex-A7
CPU1 Speed	not specified ( 4 cores )
Flash1 Chip	Brand? Model?
Flash1 Size	? MiB
RAM1 Size	? MiB
RAM1 Chip	Brand? Model?
ETH chip1	Qualcomm IPQ4019
Ethernet Port Count	1-1GbE-WAN 1-1GbE-LAN
Wired Standard	IEEE 802.3i/3u/3ab
802dot11 OUI: none specified
Expansion IF types	none specified
PoE	802.3at, standard
Power	10-24 VDC, ? A
Flags: Wave2, LTE, BLE
Other
3rd Party Firmware Support	OpenWrt • (List | Dev | DLs)
Physical
Dimensions	45.0 cm x 23.0 cm x 7 cm
Weight	2.10 kg
Radio 1
Chip1	Qualcomm IPQ4019
Wireless interface OUI	none specified
Antenna Connector Type	none specified
MIMO status	2x2:2
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.412 – 2.472 GHz
Radio 2
Chip1	Qualcomm IPQ4019
Wireless interface OUI	none specified
Antenna Connector Type	none specified
MIMO status	2x2:2
Wireless Standard	IEEE 802.11a/n/ac
802.11ac	up to 867 Mbps
802.11n	up to 300 Mbps
802.11a	up to 54 Mbps
WiFi Operating Frequency	5.180 – 5.825 GHz

For a list of all currently documented Qualcomm chipsets with specifications, see Qualcomm.

For a list of all currently documented Edge-corE device with specifications, see Edge-corE.

• 867 Mbps - 2SS 5GHz 802.11ac (80MHz chan.),

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = AC1200 class

Flashing

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)
OpenWrt Target: ipq40xx
OpenWrt Subtarget: generic
OpenWrt Package architecture: arm_cortex-a7_neon-vfpv4
Support started version: 21.02.0
Current supported version: 22.03.7
Comment:
No LTE modem info in the spec, only antennas. Does it really contain modem?
Missing DSA Setup for 23.05+

Please insert instructions here