Edge-corE ECW5110

From TechInfoDepot
Jump to navigationJump to search
abgn (AN600)
access point
WikiDevi.wi-cat.ru
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Status Unknown
Tomato any flavor
Incompatible
Platform
BrandModelRev
Edge-corE ECW5110
FCC ID
Type
access point
CPU1
CPU1 Type
MIPS 74Kc
CPU1 Speed
560 MHz 32-bit
Flash1 Chip
Macronix Model? x 2
Flash1 Size
? MiB
RAM1 Size
? MiB
RAM1 Chip
EtronTech Model? x 2
ETH chip1
ETH chip2
Atheros AR8031
Ethernet Port Count
1-1GbE-LAN
Wired Standard
IEEE 802.3i/3u/3ab

802dot11 OUI: none specified

Expansion IF types
Mini PCIe (oversized)
Mini PCIe slots
1
PoE
802.3af, standard
Power
? VDC, ? A
Connector type
barrel
Serial Port (UART)
yes, RJ-45, (115200 8N1)
Flags:
enterprise class
Other
Manuf/OEM/ODM
Accton EAP9112A-FLF-17
Retail
FCC approval date 30 April 2013
Radio 1
Chip1
Wireless interface OUI
none specified
Antenna Connector Type
U.FL
MIMO status
2x2:2
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 300 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz
Radio 2
Radio2 module
unknown
Radio2 module IF
Mini PCIe (oversized)
Chip1
Atheros Model?
Wireless interface OUI
none specified
Antenna Connector Type
U.FL
MIMO status
2x2:2
Wireless Standard
IEEE 802.11a/n
802.11n
up to 300 Mbps
802.11a
up to 54 Mbps
WiFi Operating Frequency
5 GHz

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.

For a list of all currently documented Edge-corE device with specifications, see Edge-corE.

300 Mbps - 2SS 5GHz 802.11n (40MHz chan.),
300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = AN600 class

Overview

The FCC test report indicates that this FCC ID covers the...

  • SMC WAP5110-L (representative model)
  • SMC WAP5110
  • Edge-corE ECW5110-L
  • Edge-corE ECW5110
  • Accton EAP9112A-FLF-17

... with the only differences noted as being in firmware.

"P/N: 1420000000596A" and "REV: 01" is silkscreened on the board in the FCC photos.

"P/N: 142000000597A REV: 01" is silkscreened on the wireless module.

The wireless module is using three Skyworks (SiGe) SE5003L / 5003L 5GHz power amplfier ICs.

The power adapter included with the device may be a Sunny SYS1308-2412-W2 (100-240VAC ~ 50-60Hz, 1.0A -> 12VDC 2.0A).