Eclipse WiFi EW28650

From TechInfoDepot
Jump to navigationJump to search
bgn (N300)
In-Wall Access Point
Eclipse-WiFi-EW28650.jpg
WikiDevi.wi-cat.ru
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Status Unknown
Tomato any flavor
Incompatible
Platform
BrandModelRev
Eclipse WiFi EW28650
FCC ID
Type
in-wall access point
CPU1
CPU1 Type
MIPS 24KEc
CPU1 Speed
580 MHz
Flash1 Chip
Macronix Model?
Flash1 Size
? MiB
RAM1 Size
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br />
RAM1 Chip
ESMT M14D5121632A-2.5B
ETH chip1
Ethernet Port Count
1-100MbE-WAN
1-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: none specified

Expansion IF types
none specified
PoE
802.3af, standard
Power
48-56 VDC, ? A
Connector type
Ethernet (PoE)
Serial Port (UART)
yes, internal, 4-pin header, 3.3V TTL
Other

Default SSID: In Room WiFi
Default IP address: 192.168.10.1
the IP 192.168.10.1 is used by 115 additional devices
of which 0 are Eclipse WiFi devices
Default login user: root
Default login password: root
root:root credentials used by 24 additional devices
of which 0 are Eclipse WiFi devices

Retail
FCC approval date 02 April 2014
Country of manuf Taiwan
Radio 1
Chip1
Wireless interface OUI
none specified
Antenna Connector Type
U.FL
MIMO status
2x2:2
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 300 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.

300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Overview

"P/N: 4600001-001", "WALL AP RF BOARD", and "REV : 0X0" appears to be silkscreened on the AP board in the FCC photos.

"P/N: 4600001-201__1__G", "WALL AP POWER BOARD", and "REV : 0B0" appears to be silkscreened on the power board.

Default settings (including the SSID) are per the FCC manual..