D-Link DWR-118 rev A2

From TechInfoDepot
Jump to navigationJump to search
multiple revisions of this device, use caution
abgn+ac (AC1200)
Wireless AC1200 Dual-Band Multi-WAN Router
DWR 118 A1 Image L Side.png
Homepage
Product page (A1, A2, B1)
Wikipedia
WikiDevi.wi-cat.ru
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Tomato any flavor
Incompatible
Gargoyle
Status Unknown
Platform
BrandModelRev
D-Link DWR-118 A2 E
FCC ID
none specified
Type
wireless router
Series
DWR-118
CPU1
CPU1 Type
MIPS 24KEc
CPU1 Speed
580 MHz 32-bit
Flash1 Chip
Winbond W25Q128FV
Flash1 Size
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Size
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br />
RAM1 Chip
Winbond W971GG6SB-25
ETH chip1
Switch
Marvell 88E1510
Ethernet Port Count
1-100MbE-WAN
4-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: 1C:5F:2B
Ethernet OUI: 1C:5F:2B

Stock bootloader
Jboot
Stock FW OS
Linux 2.6.36
Expansion IF types
USB 2.0
USB ports
1
USB Hub Compatible
Untested
Power
12 VDC, 1.5 A
Connector type
barrel
Serial Port (UART)
yes, 4-pin header, J1
Flags:
3G/4G modem supports
Other

Default SSID: dlink_DWR-118_2.4G_XXXX
, dlink_DWR-118_5G_XXXX
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1304 additional devices
of which 31 are D-Link devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1330 additional devices
of which 76 are D-Link devices

Manuf/OEM/ODM
Alpha Networks WR7620A -183CA-DL REV.0.1
3rd Party Firmware Support
OpenWrt • (List | Dev | DLs)
Retail
Availability End of Life
ASIN B07BJB3YNC Flag of the United States.svg
Country of manuf China
Radio 1
Chip1
Wireless interface OUI
1C:5F:2B
Antenna Connector Type
soldered
MIMO status
2x2:2
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 300 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz
Radio 2
Chip1
MediaTek MT7612EN
Wireless interface OUI
1C:5F:2B
Antenna Connector Type
none
MIMO status
2x2:2
Wireless Standard
IEEE 802.11a/n/ac
802.11ac
up to 867 Mbps
802.11n
up to 300 Mbps
802.11a
up to 54 Mbps
WiFi Operating Frequency
5 GHz
 CPU1 brandRadio1 chip1 brandRadio2 chip1 brand
D-Link DWR-118 rev A1MediaTekMediaTekMediaTek
D-Link DWR-118 rev A2MediaTekMediaTekMediaTek
D-Link DWR-118 rev B1RealtekRealtekRealtek

For a list of all currently documented Marvell chipsets with specifications, see Marvell.
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.

For a list of all currently documented D-Link device with specifications, see D-Link.

867 Mbps - 2SS 5GHz 802.11ac (80MHz chan.),
300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = AC1200 class


Overview

  • WAN: 1x FE (10/100) ports
  • LAN: 3x FE (10/100) + 1x GbE (10/100/1000) ports
  • USB: 1x USB 2.0 (3G/4G LTE modem backup support)
  • 2x external 5dBi Wi-Fi antennas (2.4 GHz & 5 GHz)

Links of Interest

(OpenWrt Downloads)
(openwrt-obsy - Cezary Jackiewicz)
(openwrt-CHKDSK88 - Paweł Dembicki)

Flashing

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
Support started version: 19.07.0
Current supported version: 23.05.0

Please insert instructions here

JTAG-Serial Info

Serial

Serial Pinouts

J1 - 4-pin header (57600, 8n1)

Boot log

Boot log • >>
CDW57BDL_003 Jboot B1162
JRecovery Version R1.2 2016/11/07 14:32
spi device id: ef 40 18 0 0 (40180000)
SPI FLASH: W25Q128FV 16M
.
....................
Starting kernel @80000000...

LINUX started...

 THIS IS ASIC
Linux version 2.6.36 (Laroche@localhost.localdomain) (gcc version 4.3.5 (Buildroot 2011.05) ) #6 Mon Nov 27 16:23:42 CST 2017
CMD_LINE:console=ttyS1,57600n8 root=/dev/mtdblock3

 The CPU feqenuce set to 580 MHz
 PCIE: bypass PCIe DLL.
 PCIE: Elastic buffer control: Addr:0x68 -> 0xB4
 disable all power about PCIe
CPU revision is: 00019650 (MIPS 24Kc)
Determined physical RAM map:
 memory: 08000000 @ 00000000 (usable)
Zone PFN ranges:
  Normal   0x00000000 -> 0x00008000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00000000 -> 0x00008000
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
Kernel command line: console=ttyS1,57600n8 root=/dev/mtdblock3
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Writing ErrCtl register=00007b53
Readback ErrCtl register=00007b53
Memory: 125704k/131072k available (3172k kernel code, 5368k reserved, 767k data, 180k init, 0k highmem)
Hierarchical RCU implementation.
	RCU debugfs-based tracing is enabled.
	Verbose stalled-CPUs detection is disabled.
NR_IRQS:128
Console: colour dummy device 80x25
console [ttyS1] enabled
Calibrating delay loop... 386.04 BogoMIPS (lpj=772096)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
NET: Registered protocol family 16
RALINK_GPIOMODE = 40a09d
RALINK_GPIOMODE = 40a09d
PPLL_CFG1=0xe4c000
MT7620 PPLL lock
PPLL_DRV =0x80080504
start PCIe register access
RALINK_PCI_PCICFG_ADDR = 1000f0

*************** MT7620 PCIe RC mode *************
bio: create slab <bio-0> at 0
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff]
pci 0000:00:00.0: BAR 9: assigned [mem 0x20100000-0x201fffff pref]
pci 0000:00:00.0: BAR 1: assigned [mem 0x20200000-0x2020ffff]
pci 0000:00:00.0: BAR 1: set to [mem 0x20200000-0x2020ffff] (PCI address [0x20200000-0x2020ffff]
pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit]
pci 0000:01:00.0: BAR 0: set to [mem 0x20000000-0x200fffff 64bit] (PCI address [0x20000000-0x200fffff]
pci 0000:01:00.0: BAR 6: assigned [mem 0x20100000-0x2010ffff pref]
pci 0000:00:00.0: PCI bridge to [bus 01-01]
pci 0000:00:00.0:   bridge window [io  disabled]
pci 0000:00:00.0:   bridge window [mem 0x20000000-0x200fffff]
pci 0000:00:00.0:   bridge window [mem 0x20100000-0x201fffff pref]
BAR0 at slot 0 = 0
bus=0x0, slot = 0x0
res[0]->start = 0
res[0]->end = 0
res[1]->start = 20200000
res[1]->end = 2020ffff
res[2]->start = 0
res[2]->end = 0
res[3]->start = 0
res[3]->end = 0
res[4]->start = 0
res[4]->end = 0
res[5]->start = 0
res[5]->end = 0
bus=0x1, slot = 0x0
res[0]->start = 20000000
res[0]->end = 200fffff
res[1]->start = 0
res[1]->end = 0
res[2]->start = 0
res[2]->end = 0
res[3]->start = 0
res[3]->end = 0
res[4]->start = 0
res[4]->end = 0
res[5]->start = 0
res[5]->end = 0
Switching to clocksource MIPS
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RT3xxx EHCI/OHCI init.
squashfs: version 4.0 (2009/01/31) Phillip Lougher
msgmni has been set to 245
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered (default)
HDLC line discipline maxframe=4096
N_HDLC line discipline registered.
Ralink gpio driver initialized
Enable Ralink GDMA Controller Module 
GDMA IP Version=3
======================================
   SPI driver, modified by Jason
======================================
<-----
0x60: 0x0040809d
-----
spidrv_major = 217
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x10000500 (irq = 37) is a 16550A
serial8250: ttyS1 at MMIO 0x10000c00 (irq = 12) is a 16550A
brd: module loaded
deice id : ef 40 18 0 0 (40180000)
W25Q128BV(ef 40180000) (16384 Kbytes)
mtd .name = raspi, .size = 0x01000000 (0M) .erasesize = 0x00000010 (0K) .numeraseregions = 65536
Creating 7 MTD partitions on "raspi":
0x000000000000-0x000001000000 : "Whole"
0x000000000000-0x000000010000 : "Bootloader"
0x000000010000-0x000000150000 : "Kernel"
0x000000180000-0x000000e90000 : "RootFS"
0x000000e90000-0x000000f10000 : "Storage"
0x000000f10010-0x000000ff0000 : "UI"
mtd: partition "UI" doesn't start on an erase block boundary -- force read-only
0x000000ff0000-0x000001000000 : "Config"
SMACCR1 -- : 0x0000000c
SMACCR0 -- : 0x432880f8
Ralink APSoC Ethernet Driver Initilization. v3.0  256 rx/tx descriptors allocated, mtu = 1500!
NAPI enable, Tx Ring = 256, Rx Ring = 256
SMACCR1 -- : 0x0000000c
SMACCR0 -- : 0x432880f1
PROC INIT OK!
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
PPTP driver version 0.8.5
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
rt3xxx-ehci rt3xxx-ehci: Ralink EHCI Host Controller
rt3xxx-ehci rt3xxx-ehci: new USB bus registered, assigned bus number 1
rt3xxx-ehci rt3xxx-ehci: irq 18, io mem 0x101c0000
rt3xxx-ehci rt3xxx-ehci: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
rt3xxx-ohci rt3xxx-ohci: RT3xxx OHCI Controller
rt3xxx-ohci rt3xxx-ohci: new USB bus registered, assigned bus number 2
rt3xxx-ohci rt3xxx-ohci: irq 18, io mem 0x101c1000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
u32 classifier
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (1964 buckets, 7856 max)
ctnetlink v0.93: registering with nfnetlink.
xt_time: kernel timezone is -0000
IPv4 over IPv4 tunneling driver
GRE over IPv4 demultiplexor driver
GRE over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team, Type=Restricted Cone
arp_tables: (C) 2002 David S. Miller
TCP cubic registered
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
L2TP core driver, V2.0
PPPoL2TP kernel driver, V2.0
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
Freeing unused kernel memory: 180k freed
Inter-|   Receive             Raeth v3.0 (  NAPI
 ,SkbRecycle  )
     
phy_tx_ring = 0x07fd1000, tx_ring = 0xa7fd1000

phy_rx_ring0 = 0x07fd2000, rx_ring0 = 0xa7fd2000
Set 7014 to 1000c
Marvel Giga Phy is found
Reset MARVELL phy2
Reset MARVELL phy2 Done
SMACCR1 -- : 0x0000000c
SMACCR0 -- : 0x432880f1
  ESW: Link Status Changed - Port3 Link Down
  CDMA_CSG_CFG = 81000000
  GDMA1_FWD_CFG = 20710000
                   |  Transmit
 face |bytes    packets errs drop fifo frame compressed multicast|bytes    packets errs drop fifo colls carrier compressed
    lo:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
  eth2:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
 tunl0:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
  gre0:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
  sit0:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
ip6tnl0:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
 flash_open: flash_fd=3
Mount D Section.
mount: /dev/mtdblock5 is write-protected, mounting read-only
 flash_open: flash_fd=9
Unhandled kernel unaligned access[#1]:
Cpu 0
$ 0   : 00000000 00000001 00006b04 00006b02
$ 4   : 87f35c40 00606b02 0040a01d 0040a01d
$ 8   : 803d0000 80000008 800b4440 fffffff8
$12   : 7f1c0300 2aeea000 00000018 00400d00
$16   : ffffffe7 87f35c40 00000004 b0000000
$20   : 00606b02 0040a01d 00400a64 00000002
$24   : 0000001b 2aefdb80                  
$28   : 87d0a000 87d0be40 00480000 800b3dbc
Hi    : 00000369
Lo    : 00001be5
epc   : 801b6620 rdm_ioctl+0x98/0x490
    Not tainted
ra    : 800b3dbc do_vfs_ioctl+0xb0/0x734
Status: 1100ff03    KERNEL EXL IE 
Cause : 00800010
BadVA : 0040a01d
PrId  : 00019650 (MIPS 24Kc)
Modules linked in:
Process reg (pid: 877, threadinfo=87d0a000, task=87c60918, tls=00000000)
Stack : 00000000 87c3b000 87c0d1c0 8785e0d4 87c60918 2aefe690 87c0d1c0 8785e0d4
        01bd07b0 00000004 ffffffe7 87f35c40 00000004 0040a01d 00606b02 004005bc
        00400a64 800b3dbc 80409000 80097e00 00000000 00030002 00000000 00000000
        fffffff4 00000001 00000000 87f35c40 87ca4e40 87ca4e48 00000000 00000000
        00000000 00000000 00000000 800b0504 87f35c48 00000020 87f35c40 87f35c40
        ...
Call Trace:
[<801b6620>] rdm_ioctl+0x98/0x490
[<800b3dbc>] do_vfs_ioctl+0xb0/0x734
[<800b4490>] sys_ioctl+0x50/0xb0
[<8000a144>] stack_done+0x20/0x40


Code: 24026b02  1462008b  24026b04 <8ea30000> 00051402  00531021  ac430000  8fbf0044  00003821 
Disabling lock debugging due to kernel taint
addrconf_dad_completed 7
Segmentation fault
switch reg write offset=2004, value=ff0003
ESW: Link Status Changed - Port3 Link UP
switch reg write offset=2104, value=ff0003
switch reg write offset=2204, value=ff0003
switch reg write offset=2304, value=ff0003
switch reg write offset=2404, value=ff0003
switch reg write offset=2504, value=ff0003
switch reg write offset=2010, value=810000c0
switch reg write offset=2110, value=810000c0
switch reg write offset=2210, value=810000c0
switch reg write offset=2310, value=810000c0
switch reg write offset=2410, value=810000c0
switch reg write offset=2510, value=810000c0
switch reg write offset=2610, value=81000000
switch reg write offset=2710, value=81000000
switch reg write offset=2604, value=20ff0003
switch reg write offset=2704, value=20ff0003
switch reg write offset=2014, value=10002
switch reg write offset=2114, value=10001
switch reg write offset=2214, value=10001
switch reg write offset=2314, value=10001
switch reg write offset=2414, value=10001
switch reg write offset=2514, value=10002
rmmod: hw_nat: No such file or directory
ifconfig: SIOCGIFFLAGS: No such device
bridge brx0 doesn't exist; can't delete it
ifconfig: SIOCGIFFLAGS: No such device
bridge brx1 doesn't exist; can't delete it
ifconfig: SIOCGIFFLAGS: No such device
bridge brx2 doesn't exist; can't delete it
ifconfig: SIOCGIFFLAGS: No such device
bridge brx3 doesn't exist; can't delete it
ifconfig: SIOCGIFFLAGS: No such device
bridge brx4 doesn't exist; can't delete it
ifconfig: SIOCGIFFLAGS: No such device
bridge brx5 doesn't exist; can't delete it
ifconfig: SIOCGIFFLAGS: No such device
bridge brx6 doesn't exist; can't delete it
ifconfig: SIOCGIFFLAGS: No such device
bridge brx7 doesn't exist; can't delete it
ifconfig: SIOCGIFFLAGS: No such device
bridge brx8 doesn't exist; can't delete it
ifconfig: SIOCGIFFLAGS: No such device
bridge brx9 doesn't exist; can't delete it
ifconfig: SIOCGIFFLAGS: No such device
bridge brx10 doesn't exist; can't delete it
ifconfig: SIOCGIFFLAGS: No such device
bridge brx11 doesn't exist; can't delete it
ifconfig: SIOCGIFFLAGS: No such device
bridge brx12 doesn't exist; can't delete it
ifconfig: SIOCGIFFLAGS: No such device
bridge brx13 doesn't exist; can't delete it
ifconfig: SIOCGIFFLAGS: No such device
bridge brx14 doesn't exist; can't delete it
ifconfig: SIOCGIFFLAGS: No such device
bridge brx15 doesn't exist; can't delete it
ifconfig: SIOCGIFFLAGS: No such device
bridge brx16 doesn't exist; can't delete it
ifconfig: SIOCGIFFLAGS: No such device
bridge brx17 doesn't exist; can't delete it
ifconfig: SIOCGIFFLAGS: No such device
bridge brx18 doesn't exist; can't delete it
ifconfig: SIOCGIFFLAGS: No such device
bridge brx19 doesn't exist; can't delete it
sh: ebtables: not found
sh: ebtables: not found
sh: ebtables: not found
sh: ebtables: not found
iptables v1.4.10: Couldn't load target `block_br':File not found

Try `iptables -h' or 'iptables --help' for more information.
iptables: No chain/target/match by that name.
iptables: No chain/target/match by that name.
iptables v1.4.10: Couldn't load target `block_br_input':File not found

Try `iptables -h' or 'iptables --help' for more information.
iptables: No chain/target/match by that name.
iptables: No chain/target/match by that name.
sh: ebtables: not found
sh: ebtables: not found
sh: ebtables: not found
sh: ebtables: not found
vconfig: ioctl error for add: File exists
Set port eth2.1.0 
vconfig: ioctl error for add: File exists
device eth2 entered promiscuous mode
set hello timer failed: Invalid argument
device eth2.1 entered promiscuous mode
br0: port 1(eth2.1) entering forwarding state
br0: port 1(eth2.1) entering forwarding state
sh: ebtables: not found
Set port eth2.2.0 
vconfig: ioctl error for add: File exists
, Enable: 1
Wireless 5G AP0, Enable: 1
phy 0, reg 0, val 0x800
Set: phy[0].reg[0] = 0800
phy 1, reg 0, val 0x800
Set: phy[1].reg[0] = 0800
phy 2, reg 0, val 0x800
Set: phy[2].reg[0] = 0800
phy 3, reg 0, val 0x800
Set: phy[3].reg[0] = 0800
phy 4, reg 0, val 0x800
Set: phy[4].reg[0] = 0800
phy 5, reg 0, val 0x800
Set: phy[5].reg[0] = 0800
sh: ebtables: not found
sh: ebtables: not found
sh: ebtables: not found
sh: ebtables: not found
brctl addif br0 ra0
interface ra0 does not exist!
brctl addif br0 rai0
ESW: Link Status Changed - Port3 Link Down
interface rai0 does not exist!
phy 0, reg 0, val 0x3300
Set: phy[0].reg[0] = 3300
addrconf_dad_completed 7
phy 1, reg 0, val 0x3300
Set: phy[1].reg[0] = 3300
phy 2, reg 0, val 0x3300
Set: phy[2].reg[0] = 3300
addrconf_dad_completed 7
phy 3, reg 0, val 0x3300
Set: phy[3].reg[0] = 3300
addrconf_dad_completed 7
phy 4, reg 0, val 0x3300
Set: phy[4].reg[0] = 3300
phy 5, reg 0, val 0x3300
Set: phy[5].reg[0] = 3300
init vlan
init lan
init stp
init ondemand
init multiwan2
init multi_ondemand
init routing
init nat
==== NAT START (WAN:ALL Func:ALL) ====
cat: /var/nat/nat.wan: No such file or directory
/var/nat/nat-draft.uyg: /var/nat/nat-draft.uyg: 141: cannot create /proc/sys/net/ipv4/route/secret_interval: Directory nonexistent
addrconf_dad_completed 7
SINGLE DMZ start
gre_post
ESW: Link Status Changed - Port3 Link UP
Using intrapositioned negation (`--option ! this`) is deprecated in favor of extrapositioned (`! --option this`).
modprobe: module ip6_tables not found
modprobe: failed to load module ip6_tables
ip6tables v1.4.10: can't initialize ip6tables table `filter': iptables who? (do you need to insmod?)
Perhaps ip6tables or your kernel needs to be upgraded.
init dhcpsrv
sdmz_enable:0

server_config.pool_check = 1

server_config.pool_check = 1

 start = 192.168.2.50, end = 192.168.2.199, lan_ip = 192.168.2.1, interface=br0, ifindex=0

 start = 192.168.2.50, end = 192.168.2.199, lan_ip = 192.168.2.1, interface=br0, ifindex=0

0

Unable to open /var/run/udhcpd.leases for reading
udhcpd (v0.9.9-pre) started
Unable to open /var/run/udhcpd.leases for reading
init dnsrelay
init spap
init ddns
init snmp
init route_protocol
rm: cannot remove '/etc/ripd.conf': No such file or directory
cat: /var/run/ripd.pid: No such file or directory
BusyBox v1.3.2 (2017-11-14 11:35:37 CST) multi-call binary

Usage: kill [-l] [-signal] process-id [process-id ...]

cat: /var/run/zebra.pid: No such file or directory
BusyBox v1.3.2 (2017-11-14 11:35:37 CST) multi-call binary

Usage: kill [-l] [-signal] process-id [process-id ...]

init load_balance
init time
timezone:-60
dsttime:0
init rbydom
init rbyip
init qos
init keepalive
init user
init ftp_alg
init rtsp_alg
init schedule
init mupnpd
init watchdog
init reboot
init wireless_mode
sdmz_enable:0

server_config.pool_check = 1

server_config.pool_check = 1

 start = 192.168.2.50, end = 192.168.2.199, lan_ip = 192.168.2.1, interface=br0, ifindex=0

 start = 192.168.2.50, end = 192.168.2.199, lan_ip = 192.168.2.1, interface=br0, ifindex=0

0

udhcpd (v0.9.9-pre) started
init wlanap
eth2: no IPv6 routers present
Length of MAC:6
 mac:1c:5f:2b:f3:25:a0:
----
register rt2860_mt7612
PCI: Setting latency timer of device 0000:01:00.0 to 64


=== pAd = c0882000, size = 2136912 ===

<-- RTMPAllocTxRxRingMemory, Status=0
<-- RTMPAllocAdapterBlock, Status=0
pAd->CSRBaseAddress =0xc0780000, csr_addr=0xc0780000!
device_id =0x7662
==>rlt_wlan_chip_onoff(): OnOff:1, Reset= 1, pAd->WlanFunCtrl:0x0, Reg-WlanFunCtrl=0x20a
cfg_mode=14
cfg_mode=14
wmode_band_equal(): Band Not Equal!
APSDCapable[0]=0
APSDCapable[1]=0
APSDCapable[2]=0
APSDCapable[3]=0
APSDCapable[4]=0
APSDCapable[5]=0
APSDCapable[6]=0
APSDCapable[7]=0
APSDCapable[8]=0
APSDCapable[9]=0
APSDCapable[10]=0
APSDCapable[11]=0
APSDCapable[12]=0
APSDCapable[13]=0
APSDCapable[14]=0
APSDCapable[15]=0
default ApCliAPSDCapable[0]=0
pAd->ed_threshold = 90
pAd->ed_false_cca_threshold = 3000
2a:55:44:e4:05:1a:cb:eb:01:93:83:88:b2:c3:4f:8f:
50:b2:65:62:c1:a3:cb:f9:52:8e:b0:b1:79:c9:b6:97:

ChipID = 7612
RtmpChipOpsEepromHook::e2p_type=2, inf_Type=5
NVM is FLASH mode (pAd->flash_offset = 0x0)
get_dev_name_prefix(): dev_idx = 0, dev_name_prefix=rai
build time = 
20141115060606a
rom patch for E3 IC

platform = 
ALPS
hw/sw version = 
����
patch version = 
�
FW Version:0.0.00 Build:1
Build Time:201507311614____
fw for E3 IC
RX[0] DESC a7668000 size = 4096
RX[1] DESC a7669000 size = 4096
RTMP_TimerListAdd: add timer obj c0892338!
RTMP_TimerListAdd: add timer obj c09954cc!
RTMP_TimerListAdd: add timer obj c091ad50!
RTMP_TimerListAdd: add timer obj c091ad24!
RTMP_TimerListAdd: add timer obj c091ad7c!
RTMP_TimerListAdd: add timer obj c091acf8!
RTMP_TimerListAdd: add timer obj c091a7bc!
RTMP_TimerListAdd: add timer obj c08963dc!
RTMP_TimerListAdd: add timer obj c0895fc0!
RTMP_TimerListAdd: add timer obj c08963ac!
RTMP_TimerListAdd: add timer obj c0896754!
RTMP_TimerListAdd: add timer obj c08964a4!
RTMP_TimerListAdd: add timer obj c08964d4!
RTMP_TimerListAdd: add timer obj c0896694!
RTMP_TimerListAdd: add timer obj c08966c4!
RTMP_TimerListAdd: add timer obj c08996f4!
RTMP_TimerListAdd: add timer obj c08992d8!
RTMP_TimerListAdd: add timer obj c08996c4!
RTMP_TimerListAdd: add timer obj c0899a6c!
RTMP_TimerListAdd: add timer obj c08997bc!
RTMP_TimerListAdd: add timer obj c08997ec!
RTMP_TimerListAdd: add timer obj c08999ac!
RTMP_TimerListAdd: add timer obj c08999dc!
RTMP_TimerListAdd: add timer obj c089ca0c!
RTMP_TimerListAdd: add timer obj c089c5f0!
RTMP_TimerListAdd: add timer obj c089c9dc!
RTMP_TimerListAdd: add timer obj c089cd84!
RTMP_TimerListAdd: add timer obj c089cad4!
RTMP_TimerListAdd: add timer obj c089cb04!
RTMP_TimerListAdd: add timer obj c089ccc4!
RTMP_TimerListAdd: add timer obj c089ccf4!
RTMP_TimerListAdd: add timer obj c089fd24!
RTMP_TimerListAdd: add timer obj c089f908!
RTMP_TimerListAdd: add timer obj c089fcf4!
RTMP_TimerListAdd: add timer obj c08a009c!
RTMP_TimerListAdd: add timer obj c089fdec!
RTMP_TimerListAdd: add timer obj c089fe1c!
RTMP_TimerListAdd: add timer obj c089ffdc!
RTMP_TimerListAdd: add timer obj c08a000c!
RTMP_TimerListAdd: add timer obj c08a303c!
RTMP_TimerListAdd: add timer obj c08a2c20!
RTMP_TimerListAdd: add timer obj c08a300c!
RTMP_TimerListAdd: add timer obj c08a33b4!
RTMP_TimerListAdd: add timer obj c08a3104!
RTMP_TimerListAdd: add timer obj c08a3134!
RTMP_TimerListAdd: add timer obj c08a32f4!
RTMP_TimerListAdd: add timer obj c08a3324!
RTMP_TimerListAdd: add timer obj c08a6354!
RTMP_TimerListAdd: add timer obj c08a5f38!
RTMP_TimerListAdd: add timer obj c08a6324!
RTMP_TimerListAdd: add timer obj c08a66cc!
RTMP_TimerListAdd: add timer obj c08a641c!
RTMP_TimerListAdd: add timer obj c08a644c!
RTMP_TimerListAdd: add timer obj c08a660c!
RTMP_TimerListAdd: add timer obj c08a663c!
RTMP_TimerListAdd: add timer obj c08a966c!
RTMP_TimerListAdd: add timer obj c08a9250!
RTMP_TimerListAdd: add timer obj c08a963c!
RTMP_TimerListAdd: add timer obj c08a99e4!
RTMP_TimerListAdd: add timer obj c08a9734!
RTMP_TimerListAdd: add timer obj c08a9764!
RTMP_TimerListAdd: add timer obj c08a9924!
RTMP_TimerListAdd: add timer obj c08a9954!
RTMP_TimerListAdd: add timer obj c08ac984!
RTMP_TimerListAdd: add timer obj c08ac568!
RTMP_TimerListAdd: add timer obj c08ac954!
RTMP_TimerListAdd: add timer obj c08accfc!
RTMP_TimerListAdd: add timer obj c08aca4c!
RTMP_TimerListAdd: add timer obj c08aca7c!
RTMP_TimerListAdd: add timer obj c08acc3c!
RTMP_TimerListAdd: add timer obj c08acc6c!
RTMP_TimerListAdd: add timer obj c091d1d4!
RTMP_TimerListAdd: add timer obj c091cdb8!
RTMP_TimerListAdd: add timer obj c091d1a4!
RTMP_TimerListAdd: add timer obj c091d54c!
RTMP_TimerListAdd: add timer obj c091d29c!
RTMP_TimerListAdd: add timer obj c091d2cc!
RTMP_TimerListAdd: add timer obj c091d204!
RTMP_TimerListAdd: add timer obj c091d234!
RTMP_TimerListAdd: add timer obj c091d264!
RTMP_TimerListAdd: add timer obj c094124c!
RTMP_TimerListAdd: add timer obj c094133c!
RTMP_TimerListAdd: add timer obj c0941278!
RTMP_TimerListAdd: add timer obj c091d8bc!
cfg_mode=14
cfg_mode=14
wmode_band_equal(): Band Not Equal!
APSDCapable[0]=0
APSDCapable[1]=0
APSDCapable[2]=0
APSDCapable[3]=0
APSDCapable[4]=0
APSDCapable[5]=0
APSDCapable[6]=0
APSDCapable[7]=0
APSDCapable[8]=0
APSDCapable[9]=0
APSDCapable[10]=0
APSDCapable[11]=0
APSDCapable[12]=0
APSDCapable[13]=0
APSDCapable[14]=0
APSDCapable[15]=0
default ApCliAPSDCapable[0]=0
pAd->ed_threshold = 90
pAd->ed_false_cca_threshold = 3000
eth2.1: no IPv6 routers present
2a:55:44:e4:05:1a:cb:eb:01:93:83:88:b2:c3:4f:8f:
50:b2:65:62:c1:a3:cb:f9:52:8e:b0:b1:79:c9:b6:97:

1. Phy Mode = 49
get_chl_grp:illegal channel (167)
get_chl_grp:illegal channel (167)
get_chl_grp:illegal channel (169)
br0: no IPv6 routers present
get_chl_grp:illegal channel (169)
get_chl_grp:illegal channel (171)
get_chl_grp:illegal channel (171)
/home/Laroche/Ra/DWR-118A2/rootfs/src/amit_priv/RalinkRT2860AP/mt7612e_3040/rlt_wifi_ap/../rlt_wifi/chips/mt76x2.c:2899 assert (ad->TxPower[choffset].Channel == 42)failed
Country Region from e2p = 6
mt76x2_read_temp_info_from_eeprom:: is_temp_tx_alc=0, temp_tx_alc_enable=0
mt76x2_read_tx_alc_info_from_eeprom:: is_ePA_mode=1, ePA_type=0
mt76x2_read_tx_alc_info_from_eeprom:: [5G band] high_temp_slope=15, low_temp_slope=9
mt76x2_read_tx_alc_info_from_eeprom:: [2G band] high_temp_slope=13, low_temp_slope=16
mt76x2_read_tx_alc_info_from_eeprom:: [5G band] tc_lower_bound=-7, tc_upper_bound=4
mt76x2_read_tx_alc_info_from_eeprom:: [2G band] tc_lower_bound=-7, tc_upper_bound=5
mt76x2_get_external_lna_gain::LNA type=0x0, BLNAGain=0xffffff8c, ALNAGain0=0xffffff8c, ALNAGain1=0xffffff8c, ALNAGain2=0xffffff8c
2. Phy Mode = 49
RTMP_TimerListAdd: add timer obj c0893828!
RTMP_TimerListAdd: add timer obj c0896b40!
RTMP_TimerListAdd: add timer obj c0899e58!
RTMP_TimerListAdd: add timer obj c089d170!
RTMP_TimerListAdd: add timer obj c08a0488!
RTMP_TimerListAdd: add timer obj c08a37a0!
RTMP_TimerListAdd: add timer obj c08a6ab8!
RTMP_TimerListAdd: add timer obj c08a9dd0!
RTMP_TimerListAdd: add timer obj c091d5d0!
3. Phy Mode = 49
andes_pci_fw_init
0x1300 = 00073200
AntCfgInit: primary/secondary ant 0/1
andes_load_cr:cr_type(2)
ChipStructAssign(): MT76x2 hook !
RTMPSetPhyMode: channel is out of range, use first channel=0 
MCS Set = ff ff 00 00 01
RTMP_TimerListAdd: add timer obj c09270e4!
mt76x2_bbp_adjust():rf_bw=2, ext_ch=1, PrimCh=36, HT-CentCh=38, VHT-CentCh=42
APStartUp(): AP Set CentralFreq at 42(Prim=36, HT-CentCh=38, VHT-CentCh=42, BBP_BW=2)
mt76x2_calibration(channel = 42)
@@@ ed_monitor_exit : ===>
@@@ ed_monitor_exit : <===
Main bssid = 1c:5f:2b:f3:25:a0
mt76x2_reinit_agc_gain:original agc_vga0 = 0x48, agc_vga1 = 0x48
mt76x2_reinit_agc_gain:updated agc_vga0 = 0x48, agc_vga1 = 0x48
mt76x2_reinit_hi_lna_gain:original hi_lna0 = 0x33, hi_lna1 = 0x33
mt76x2_reinit_hi_lna_gain:updated hi_lna0 = 0x33, hi_lna1 = 0x33
original vga value(chain0) = 48
original vga value(chain1) = 48
<==== rt28xx_init, Status=0
get_dev_name_prefix(): dev_idx = 0, dev_name_prefix=wdsi
get_dev_name_prefix(): dev_idx = 0, dev_name_prefix=wdsi
get_dev_name_prefix(): dev_idx = 0, dev_name_prefix=wdsi
get_dev_name_prefix(): dev_idx = 0, dev_name_prefix=wdsi
get_dev_name_prefix(): dev_idx = 0, dev_name_prefix=apclii
RTMPDrvOpen(1):Check if PDMA is idle!
RTMPDrvOpen(2):Check if PDMA is idle!
device rai0 entered promiscuous mode
br0: port 2(rai0) entering forwarding state
br0: port 2(rai0) entering forwarding state
killall: check_status2: no process killed
route: SIOC[ADD|DEL]RT: No such device
eth2.2: no IPv6 routers present
wscd: SSDP UDP PORT = 1900
Invalid command : ledflashstop
device wdsi0 is not a slave of br0
device wdsi1 is not a slave of br0
device wdsi2 is not a slave of br0
device wdsi3 is not a slave of br0
device rai0 left promiscuous mode
br0: port 2(rai0) entering forwarding state
andes_pci_erasefw
==>rlt_wlan_chip_onoff(): OnOff:0, Reset= 0, pAd->WlanFunCtrl:0x20b, Reg-WlanFunCtrl=0x20b
RTMP_TimerListRelease: release timer obj c0892338!
RTMP_TimerListRelease: release timer obj c09954cc!
RTMP_TimerListRelease: release timer obj c091ad50!
RTMP_TimerListRelease: release timer obj c091ad24!
RTMP_TimerListRelease: release timer obj c091ad7c!
RTMP_TimerListRelease: release timer obj c091acf8!
RTMP_TimerListRelease: release timer obj c091a7bc!
RTMP_TimerListRelease: release timer obj c08963dc!
RTMP_TimerListRelease: release timer obj c0895fc0!
RTMP_TimerListRelease: release timer obj c08963ac!
RTMP_TimerListRelease: release timer obj c0896754!
RTMP_TimerListRelease: release timer obj c08964a4!
RTMP_TimerListRelease: release timer obj c08964d4!
RTMP_TimerListRelease: release timer obj c0896694!
RTMP_TimerListRelease: release timer obj c08966c4!
RTMP_TimerListRelease: release timer obj c08996f4!
RTMP_TimerListRelease: release timer obj c08992d8!
RTMP_TimerListRelease: release timer obj c08996c4!
RTMP_TimerListRelease: release timer obj c0899a6c!
RTMP_TimerListRelease: release timer obj c08997bc!
RTMP_TimerListRelease: release timer obj c08997ec!
RTMP_TimerListRelease: release timer obj c08999ac!
RTMP_TimerListRelease: release timer obj c08999dc!
RTMP_TimerListRelease: release timer obj c089ca0c!
RTMP_TimerListRelease: release timer obj c089c5f0!
RTMP_TimerListRelease: release timer obj c089c9dc!
RTMP_TimerListRelease: release timer obj c089cd84!
RTMP_TimerListRelease: release timer obj c089cad4!
RTMP_TimerListRelease: release timer obj c089cb04!
RTMP_TimerListRelease: release timer obj c089ccc4!
RTMP_TimerListRelease: release timer obj c089ccf4!
RTMP_TimerListRelease: release timer obj c089fd24!
RTMP_TimerListRelease: release timer obj c089f908!
RTMP_TimerListRelease: release timer obj c089fcf4!
RTMP_TimerListRelease: release timer obj c08a009c!
RTMP_TimerListRelease: release timer obj c089fdec!
RTMP_TimerListRelease: release timer obj c089fe1c!
RTMP_TimerListRelease: release timer obj c089ffdc!
RTMP_TimerListRelease: release timer obj c08a000c!
RTMP_TimerListRelease: release timer obj c08a303c!
RTMP_TimerListRelease: release timer obj c08a2c20!
RTMP_TimerListRelease: release timer obj c08a300c!
RTMP_TimerListRelease: release timer obj c08a33b4!
RTMP_TimerListRelease: release timer obj c08a3104!
RTMP_TimerListRelease: release timer obj c08a3134!
RTMP_TimerListRelease: release timer obj c08a32f4!
RTMP_TimerListRelease: release timer obj c08a3324!
RTMP_TimerListRelease: release timer obj c08a6354!
RTMP_TimerListRelease: release timer obj c08a5f38!
addrconf_dad_completed 7
RTMP_TimerListRelease: release timer obj c08a6324!
RTMP_TimerListRelease: release timer obj c08a66cc!
RTMP_TimerListRelease: release timer obj c08a641c!
RTMP_TimerListRelease: release timer obj c08a644c!
RTMP_TimerListRelease: release timer obj c08a660c!
RTMP_TimerListRelease: release timer obj c08a663c!
RTMP_TimerListRelease: release timer obj c08a966c!
RTMP_TimerListRelease: release timer obj c08a9250!
RTMP_TimerListRelease: release timer obj c08a963c!
RTMP_TimerListRelease: release timer obj c08a99e4!
RTMP_TimerListRelease: release timer obj c08a9734!
RTMP_TimerListRelease: release timer obj c08a9764!
RTMP_TimerListRelease: release timer obj c08a9924!
RTMP_TimerListRelease: release timer obj c08a9954!
RTMP_TimerListRelease: release timer obj c08ac984!
RTMP_TimerListRelease: release timer obj c08ac568!
RTMP_TimerListRelease: release timer obj c08ac954!
RTMP_TimerListRelease: release timer obj c08accfc!
RTMP_TimerListRelease: release timer obj c08aca4c!
RTMP_TimerListRelease: release timer obj c08aca7c!
RTMP_TimerListRelease: release timer obj c08acc3c!
RTMP_TimerListRelease: release timer obj c08acc6c!
RTMP_TimerListRelease: release timer obj c091d1d4!
RTMP_TimerListRelease: release timer obj c091cdb8!
RTMP_TimerListRelease: release timer obj c091d1a4!
RTMP_TimerListRelease: release timer obj c091d54c!
RTMP_TimerListRelease: release timer obj c091d29c!
RTMP_TimerListRelease: release timer obj c091d2cc!
RTMP_TimerListRelease: release timer obj c091d204!
RTMP_TimerListRelease: release timer obj c091d234!
RTMP_TimerListRelease: release timer obj c091d264!
RTMP_TimerListRelease: release timer obj c094124c!
RTMP_TimerListRelease: release timer obj c094133c!
RTMP_TimerListRelease: release timer obj c0941278!
RTMP_TimerListRelease: release timer obj c091d8bc!
RTMP_TimerListRelease: release timer obj c0893828!
RTMP_TimerListRelease: release timer obj c0896b40!
RTMP_TimerListRelease: release timer obj c0899e58!
RTMP_TimerListRelease: release timer obj c089d170!
RTMP_TimerListRelease: release timer obj c08a0488!
RTMP_TimerListRelease: release timer obj c08a37a0!
RTMP_TimerListRelease: release timer obj c08a6ab8!
RTMP_TimerListRelease: release timer obj c08a9dd0!
RTMP_TimerListRelease: release timer obj c091d5d0!
RTMP_TimerListRelease: release timer obj c09270e4!
init wps_status
init wps_btn
init wpa
init ipv6
init v6filter
modprobe: module ip6_tables not found
modprobe: failed to load module ip6_tables
modprobe: module ip6table_filter not found
modprobe: failed to load module ip6table_filter
modprobe: module ip6table_mangle not found
modprobe: failed to load module ip6table_mangle
modprobe: module ip6t_rt not found
modprobe: failed to load module ip6t_rt
modprobe: module ip6t_REJECT not found
modprobe: failed to load module ip6t_REJECT
init ddnsv6
init hwnat
init 3g_status
init sip_alg
init igmp
init reset_btn
init ate
killall: ated: no process killed
init wan_led
init recent
init httpd
init telnetd
/usr/bin/telnetd-action: Don't Start telnetd since CSID is set disable ...
/usr/bin/telnetd-action start ok
 flash_open: flash_fd=4
 flash_open: flash_fd=4
0, uid: 456789, deuid 0, rtime: 0, challenge: 001b778-d000-4fbf-0009-f75a31000a9b
/usr/bin/ataskset: /usr/bin/ataskset: 6: taskset: not found
 flash_open: flash_fd=4
addrconf_dad_completed 7
# rt2860v2_ap: module license 'unspecified' taints kernel.
Length of MAC:6
 mac:1c:5f:2b:f3:25:9f:
----


=== pAd = c118a000, size = 960336 ===

<-- RTMPAllocTxRxRingMemory, Status=0
<-- RTMPAllocAdapterBlock, Status=0
AP Driver version-2.7.1.6
RX DESC a653b000  size = 2048
RTMP_TimerListAdd: add timer obj c11f5638!
RTMP_TimerListAdd: add timer obj c119223c!
RTMP_TimerListAdd: add timer obj c1191e30!
RTMP_TimerListAdd: add timer obj c119220c!
RTMP_TimerListAdd: add timer obj c1192548!
RTMP_TimerListAdd: add timer obj c1192488!
RTMP_TimerListAdd: add timer obj c11924b8!
RTMP_TimerListAdd: add timer obj c1195648!
RTMP_TimerListAdd: add timer obj c119523c!
RTMP_TimerListAdd: add timer obj c1195618!
RTMP_TimerListAdd: add timer obj c1195954!
RTMP_TimerListAdd: add timer obj c1195894!
RTMP_TimerListAdd: add timer obj c11958c4!
RTMP_TimerListAdd: add timer obj c1198a54!
RTMP_TimerListAdd: add timer obj c1198648!
RTMP_TimerListAdd: add timer obj c1198a24!
RTMP_TimerListAdd: add timer obj c1198d60!
RTMP_TimerListAdd: add timer obj c1198ca0!
RTMP_TimerListAdd: add timer obj c1198cd0!
RTMP_TimerListAdd: add timer obj c119be60!
RTMP_TimerListAdd: add timer obj c119ba54!
RTMP_TimerListAdd: add timer obj c119be30!
RTMP_TimerListAdd: add timer obj c119c16c!
RTMP_TimerListAdd: add timer obj c119c0ac!
RTMP_TimerListAdd: add timer obj c119c0dc!
RTMP_TimerListAdd: add timer obj c119f26c!
RTMP_TimerListAdd: add timer obj c119ee60!
RTMP_TimerListAdd: add timer obj c119f23c!
RTMP_TimerListAdd: add timer obj c119f578!
RTMP_TimerListAdd: add timer obj c119f4b8!
RTMP_TimerListAdd: add timer obj c119f4e8!
RTMP_TimerListAdd: add timer obj c11a2678!
RTMP_TimerListAdd: add timer obj c11a226c!
RTMP_TimerListAdd: add timer obj c11a2648!
RTMP_TimerListAdd: add timer obj c11a2984!
RTMP_TimerListAdd: add timer obj c11a28c4!
RTMP_TimerListAdd: add timer obj c11a28f4!
RTMP_TimerListAdd: add timer obj c11a5a84!
RTMP_TimerListAdd: add timer obj c11a5678!
RTMP_TimerListAdd: add timer obj c11a5a54!
RTMP_TimerListAdd: add timer obj c11a5d90!
RTMP_TimerListAdd: add timer obj c11a5cd0!
RTMP_TimerListAdd: add timer obj c11a5d00!
RTMP_TimerListAdd: add timer obj c11a8e90!
RTMP_TimerListAdd: add timer obj c11a8a84!
RTMP_TimerListAdd: add timer obj c11a8e60!
RTMP_TimerListAdd: add timer obj c11a919c!
RTMP_TimerListAdd: add timer obj c11a90dc!
RTMP_TimerListAdd: add timer obj c11a910c!
RTMP_TimerListAdd: add timer obj c11ac29c!
RTMP_TimerListAdd: add timer obj c11abe90!
RTMP_TimerListAdd: add timer obj c11ac26c!
RTMP_TimerListAdd: add timer obj c11ac5a8!
RTMP_TimerListAdd: add timer obj c11ac4e8!
RTMP_TimerListAdd: add timer obj c11ac518!
RTMP_TimerListAdd: add timer obj c11af6a8!
RTMP_TimerListAdd: add timer obj c11af29c!
RTMP_TimerListAdd: add timer obj c11af678!
RTMP_TimerListAdd: add timer obj c11af9b4!
RTMP_TimerListAdd: add timer obj c11af8f4!
RTMP_TimerListAdd: add timer obj c11af924!
RTMP_TimerListAdd: add timer obj c11b2ab4!
RTMP_TimerListAdd: add timer obj c11b26a8!
RTMP_TimerListAdd: add timer obj c11b2a84!
RTMP_TimerListAdd: add timer obj c11b2dc0!
RTMP_TimerListAdd: add timer obj c11b2d00!
RTMP_TimerListAdd: add timer obj c11b2d30!
RTMP_TimerListAdd: add timer obj c11b5ec0!
RTMP_TimerListAdd: add timer obj c11b5ab4!
RTMP_TimerListAdd: add timer obj c11b5e90!
RTMP_TimerListAdd: add timer obj c11b61cc!
RTMP_TimerListAdd: add timer obj c11b610c!
RTMP_TimerListAdd: add timer obj c11b613c!
RTMP_TimerListAdd: add timer obj c11b92cc!
RTMP_TimerListAdd: add timer obj c11b8ec0!
RTMP_TimerListAdd: add timer obj c11b929c!
RTMP_TimerListAdd: add timer obj c11b95d8!
RTMP_TimerListAdd: add timer obj c11b9518!
RTMP_TimerListAdd: add timer obj c11b9548!
RTMP_TimerListAdd: add timer obj c11bc6d8!
RTMP_TimerListAdd: add timer obj c11bc2cc!
RTMP_TimerListAdd: add timer obj c11bc6a8!
RTMP_TimerListAdd: add timer obj c11bc9e4!
RTMP_TimerListAdd: add timer obj c11bc924!
RTMP_TimerListAdd: add timer obj c11bc954!
RTMP_TimerListAdd: add timer obj c11bfae4!
RTMP_TimerListAdd: add timer obj c11bf6d8!
RTMP_TimerListAdd: add timer obj c11bfab4!
RTMP_TimerListAdd: add timer obj c11bfdf0!
RTMP_TimerListAdd: add timer obj c11bfd30!
RTMP_TimerListAdd: add timer obj c11bfd60!
RTMP_TimerListAdd: add timer obj c11c2ef0!
RTMP_TimerListAdd: add timer obj c11c2ae4!
RTMP_TimerListAdd: add timer obj c11c2ec0!
RTMP_TimerListAdd: add timer obj c11c31fc!
RTMP_TimerListAdd: add timer obj c11c313c!
RTMP_TimerListAdd: add timer obj c11c316c!
RTMP_TimerListAdd: add timer obj c11cbfa4!
RTMP_TimerListAdd: add timer obj c11cc0c0!
RTMP_TimerListAdd: add timer obj c11cbfd0!
RTMP_TimerListAdd: add timer obj c11c352c!
RTMP_TimerListAdd: add timer obj c118f4cc!
RTMP_TimerListAdd: add timer obj c11928d8!
RTMP_TimerListAdd: add timer obj c1195ce4!
RTMP_TimerListAdd: add timer obj c11990f0!
RTMP_TimerListAdd: add timer obj c119c4fc!
RTMP_TimerListAdd: add timer obj c119f908!
RTMP_TimerListAdd: add timer obj c11a2d14!
RTMP_TimerListAdd: add timer obj c11a6120!
RTMP_TimerListAdd: add timer obj c11a952c!
RTMP_TimerListAdd: add timer obj c11ac938!
RTMP_TimerListAdd: add timer obj c11afd44!
RTMP_TimerListAdd: add timer obj c11b3150!
RTMP_TimerListAdd: add timer obj c11b655c!
RTMP_TimerListAdd: add timer obj c11b9968!
RTMP_TimerListAdd: add timer obj c11bcd74!
RTMP_TimerListAdd: add timer obj c11c0180!
RTMP_TimerListAdd: add timer obj c11c3240!
APSDCapable[0]=0
APSDCapable[1]=0
APSDCapable[2]=0
APSDCapable[3]=0
APSDCapable[4]=0
APSDCapable[5]=0
APSDCapable[6]=0
APSDCapable[7]=0
APSDCapable[8]=0
APSDCapable[9]=0
APSDCapable[10]=0
APSDCapable[11]=0
APSDCapable[12]=0
APSDCapable[13]=0
APSDCapable[14]=0
APSDCapable[15]=0
eth2.2: no IPv6 routers present
1. Phy Mode = 9
2. Phy Mode = 9
E2PROM: D0 target power=0xff20 
E2PROM: 40 MW Power Delta= 0 
3. Phy Mode = 9
AntCfgInit: primary/secondary ant 0/1
Initialize RF Central Registers for E2 !!!
Initialize RF Central Registers for E3 !!!
Initialize RF Channel Registers for E2 !!!
Initialize RF Channel Registers for E3 !!!
Initialize RF DCCal Registers for E2 !!!
Initialize RF DCCal Registers for E3 !!!
D1 = 3, D2 = 8, CalCode = 12 !!!
RT6352_Temperature_Init : BBPR49 = 0x3
RT6352_Temperature_Init : TemperatureRef25C = 0xfffffff9
Current Temperature from BBP_R49=0xfffffff7
 TX BW Filter Calibration !!!
 RX BW Filter Calibration !!!
LOFT Calibration Done!
IQCalibration Start!
IQCalibration Done! CH = 0, (gain= 0, phase= 1)
IQCalibration Start!
IQCalibration Done! CH = 1, (gain= 3, phase=3b)
TX IQ Calibration Done!
RTMPSetPhyMode: channel is out of range, use first channel=0 
MCS Set = ff ff 00 00 01
SYNC - BBP R4 to 20MHz.l
SYNC - BBP R4 to 20MHz.l
SYNC - BBP R4 to 20MHz.l
SYNC - BBP R4 to 20MHz.l
SYNC - BBP R4 to 20MHz.l
SYNC - BBP R4 to 20MHz.l
SYNC - BBP R4 to 20MHz.l
SYNC - BBP R4 to 20MHz.l
SYNC - BBP R4 to 20MHz.l
SYNC - BBP R4 to 20MHz.l
SYNC - BBP R4 to 20MHz.l
SYNC - BBP R4 to 20MHz.l
RTMP_TimerListAdd: add timer obj c11c3ab4!
Main bssid = 1c:5f:2b:f3:25:9f
<==== rt28xx_init, Status=0
0x1300 = 00064380
RTMP_TimerListAdd: add timer obj c103f308!
device ra0 entered promiscuous mode
br0: port 2(ra0) entering forwarding state
br0: port 2(ra0) entering forwarding state
addrconf_dad_completed 7
Ralink APSoC Hardware Watchdog Timer
Started WatchDog Timer.
Started WatchDog Timer. LoadVlaue: 36600 sysclk: 145000000 TIMEOUT: 60
==>rlt_wlan_chip_onoff(): OnOff:1, Reset= 0, pAd->WlanFunCtrl:0x208, Reg-WlanFunCtrl=0x209
build time = 
20141115060606a
rom patch for E3 IC

platform = 
ALPS
hw/sw version = 
����
patch version = 
�
FW Version:0.0.00 Build:1
Build Time:201507311614____
fw for E3 IC
RX[0] DESC a7668000 size = 4096
RX[1] DESC a7669000 size = 4096
RTMP_TimerListAdd: add timer obj c0892338!
RTMP_TimerListAdd: add timer obj c09954cc!
RTMP_TimerListAdd: add timer obj c091ad50!
RTMP_TimerListAdd: add timer obj c091ad24!
RTMP_TimerListAdd: add timer obj c091ad7c!
RTMP_TimerListAdd: add timer obj c091acf8!
RTMP_TimerListAdd: add timer obj c091a7bc!
RTMP_TimerListAdd: add timer obj c08963dc!
RTMP_TimerListAdd: add timer obj c0895fc0!
RTMP_TimerListAdd: add timer obj c08963ac!
RTMP_TimerListAdd: add timer obj c0896754!
RTMP_TimerListAdd: add timer obj c08964a4!
RTMP_TimerListAdd: add timer obj c08964d4!
RTMP_TimerListAdd: add timer obj c0896694!
RTMP_TimerListAdd: add timer obj c08966c4!
RTMP_TimerListAdd: add timer obj c08996f4!
RTMP_TimerListAdd: add timer obj c08992d8!
RTMP_TimerListAdd: add timer obj c08996c4!
RTMP_TimerListAdd: add timer obj c0899a6c!
RTMP_TimerListAdd: add timer obj c08997bc!
RTMP_TimerListAdd: add timer obj c08997ec!
RTMP_TimerListAdd: add timer obj c08999ac!
RTMP_TimerListAdd: add timer obj c08999dc!
RTMP_TimerListAdd: add timer obj c089ca0c!
RTMP_TimerListAdd: add timer obj c089c5f0!
RTMP_TimerListAdd: add timer obj c089c9dc!
RTMP_TimerListAdd: add timer obj c089cd84!
RTMP_TimerListAdd: add timer obj c089cad4!
RTMP_TimerListAdd: add timer obj c089cb04!
RTMP_TimerListAdd: add timer obj c089ccc4!
RTMP_TimerListAdd: add timer obj c089ccf4!
RTMP_TimerListAdd: add timer obj c089fd24!
RTMP_TimerListAdd: add timer obj c089f908!
RTMP_TimerListAdd: add timer obj c089fcf4!
RTMP_TimerListAdd: add timer obj c08a009c!
RTMP_TimerListAdd: add timer obj c089fdec!
RTMP_TimerListAdd: add timer obj c089fe1c!
RTMP_TimerListAdd: add timer obj c089ffdc!
RTMP_TimerListAdd: add timer obj c08a000c!
RTMP_TimerListAdd: add timer obj c08a303c!
RTMP_TimerListAdd: add timer obj c08a2c20!
RTMP_TimerListAdd: add timer obj c08a300c!
RTMP_TimerListAdd: add timer obj c08a33b4!
RTMP_TimerListAdd: add timer obj c08a3104!
RTMP_TimerListAdd: add timer obj c08a3134!
RTMP_TimerListAdd: add timer obj c08a32f4!
RTMP_TimerListAdd: add timer obj c08a3324!
RTMP_TimerListAdd: add timer obj c08a6354!
RTMP_TimerListAdd: add timer obj c08a5f38!
RTMP_TimerListAdd: add timer obj c08a6324!
RTMP_TimerListAdd: add timer obj c08a66cc!
RTMP_TimerListAdd: add timer obj c08a641c!
RTMP_TimerListAdd: add timer obj c08a644c!
RTMP_TimerListAdd: add timer obj c08a660c!
RTMP_TimerListAdd: add timer obj c08a663c!
RTMP_TimerListAdd: add timer obj c08a966c!
RTMP_TimerListAdd: add timer obj c08a9250!
RTMP_TimerListAdd: add timer obj c08a963c!
RTMP_TimerListAdd: add timer obj c08a99e4!
RTMP_TimerListAdd: add timer obj c08a9734!
RTMP_TimerListAdd: add timer obj c08a9764!
RTMP_TimerListAdd: add timer obj c08a9924!
RTMP_TimerListAdd: add timer obj c08a9954!
RTMP_TimerListAdd: add timer obj c08ac984!
RTMP_TimerListAdd: add timer obj c08ac568!
RTMP_TimerListAdd: add timer obj c08ac954!
RTMP_TimerListAdd: add timer obj c08accfc!
RTMP_TimerListAdd: add timer obj c08aca4c!
RTMP_TimerListAdd: add timer obj c08aca7c!
RTMP_TimerListAdd: add timer obj c08acc3c!
RTMP_TimerListAdd: add timer obj c08acc6c!
RTMP_TimerListAdd: add timer obj c091d1d4!
RTMP_TimerListAdd: add timer obj c091cdb8!
RTMP_TimerListAdd: add timer obj c091d1a4!
RTMP_TimerListAdd: add timer obj c091d54c!
RTMP_TimerListAdd: add timer obj c091d29c!
RTMP_TimerListAdd: add timer obj c091d2cc!
RTMP_TimerListAdd: add timer obj c091d204!
RTMP_TimerListAdd: add timer obj c091d234!
RTMP_TimerListAdd: add timer obj c091d264!
RTMP_TimerListAdd: add timer obj c094124c!
RTMP_TimerListAdd: add timer obj c094133c!
RTMP_TimerListAdd: add timer obj c0941278!
RTMP_TimerListAdd: add timer obj c091d8bc!
CfgSetCountryRegion():CountryRegion in eeprom was programmed
CfgSetCountryRegion():CountryRegion in eeprom was programmed
cfg_mode=14
cfg_mode=14
wmode_band_equal(): Band Not Equal!
APSDCapable[0]=0
APSDCapable[1]=0
APSDCapable[2]=0
APSDCapable[3]=0
APSDCapable[4]=0
APSDCapable[5]=0
APSDCapable[6]=0
APSDCapable[7]=0
APSDCapable[8]=0
APSDCapable[9]=0
APSDCapable[10]=0
APSDCapable[11]=0
APSDCapable[12]=0
APSDCapable[13]=0
APSDCapable[14]=0
APSDCapable[15]=0
default ApCliAPSDCapable[0]=0
pAd->ed_threshold = 90
pAd->ed_false_cca_threshold = 3000
2a:55:44:e4:05:1a:cb:eb:01:93:83:88:b2:c3:4f:8f:
50:b2:65:62:c1:a3:cb:f9:52:8e:b0:b1:79:c9:b6:97:

1. Phy Mode = 49
get_chl_grp:illegal channel (167)
get_chl_grp:illegal channel (167)
get_chl_grp:illegal channel (169)
get_chl_grp:illegal channel (169)
get_chl_grp:illegal channel (171)
get_chl_grp:illegal channel (171)
/home/Laroche/Ra/DWR-118A2/rootfs/src/amit_priv/RalinkRT2860AP/mt7612e_3040/rlt_wifi_ap/../rlt_wifi/chips/mt76x2.c:2899 assert (ad->TxPower[choffset].Channel == 42)failed
Country Region from e2p = 6
mt76x2_read_temp_info_from_eeprom:: is_temp_tx_alc=0, temp_tx_alc_enable=0
mt76x2_read_tx_alc_info_from_eeprom:: is_ePA_mode=1, ePA_type=0
mt76x2_read_tx_alc_info_from_eeprom:: [5G band] high_temp_slope=15, low_temp_slope=9
mt76x2_read_tx_alc_info_from_eeprom:: [2G band] high_temp_slope=13, low_temp_slope=16
mt76x2_read_tx_alc_info_from_eeprom:: [5G band] tc_lower_bound=-7, tc_upper_bound=4
mt76x2_read_tx_alc_info_from_eeprom:: [2G band] tc_lower_bound=-7, tc_upper_bound=5
mt76x2_get_external_lna_gain::LNA type=0x0, BLNAGain=0xffffff8c, ALNAGain0=0xffffff8c, ALNAGain1=0xffffff8c, ALNAGain2=0xffffff8c
2. Phy Mode = 49
RTMP_TimerListAdd: add timer obj c0893828!
RTMP_TimerListAdd: add timer obj c0896b40!
RTMP_TimerListAdd: add timer obj c0899e58!
RTMP_TimerListAdd: add timer obj c089d170!
RTMP_TimerListAdd: add timer obj c08a0488!
RTMP_TimerListAdd: add timer obj c08a37a0!
RTMP_TimerListAdd: add timer obj c08a6ab8!
RTMP_TimerListAdd: add timer obj c08a9dd0!
RTMP_TimerListAdd: add timer obj c091d5d0!
3. Phy Mode = 49
andes_pci_fw_init
0x1300 = 00064300
AntCfgInit: primary/secondary ant 0/1
andes_load_cr:cr_type(2)
ChipStructAssign(): MT76x2 hook !
RTMPSetPhyMode: channel is out of range, use first channel=0 
MCS Set = ff ff 00 00 01
RTMP_TimerListAdd: add timer obj c09270e4!
mt76x2_bbp_adjust():rf_bw=2, ext_ch=1, PrimCh=36, HT-CentCh=38, VHT-CentCh=42
APStartUp(): AP Set CentralFreq at 42(Prim=36, HT-CentCh=38, VHT-CentCh=42, BBP_BW=2)
mt76x2_calibration(channel = 42)
@@@ ed_monitor_exit : ===>
@@@ ed_monitor_exit : <===
Main bssid = 1c:5f:2b:f3:25:a0
mt76x2_reinit_agc_gain:original agc_vga0 = 0x48, agc_vga1 = 0x48
mt76x2_reinit_agc_gain:updated agc_vga0 = 0x48, agc_vga1 = 0x48
mt76x2_reinit_hi_lna_gain:original hi_lna0 = 0x33, hi_lna1 = 0x33
mt76x2_reinit_hi_lna_gain:updated hi_lna0 = 0x33, hi_lna1 = 0x33
original vga value(chain0) = 48
original vga value(chain1) = 48
<==== rt28xx_init, Status=0
RTMPDrvOpen(1):Check if PDMA is idle!
RTMPDrvOpen(2):Check if PDMA is idle!
device rai0 entered promiscuous mode
br0: port 3(rai0) entering forwarding state
br0: port 3(rai0) entering forwarding state
addrconf_dad_completed 7
ra0: no IPv6 routers present
rai0: no IPv6 routers present

/proc/mtd

/proc/mtd • >>
dev:    size   erasesize  name
mtd0: 00010000 00001000 "jboot"
mtd1: 00fe0000 00001000 "firmware"
mtd2: 0017ab95 00001000 "kernel"
mtd3: 00e6546b 00001000 "rootfs"
mtd4: 00bb7000 00001000 "rootfs_data"
mtd5: 00010000 00001000 "config"

mount

mount • >>
/dev/root on /rom type squashfs (ro,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,noatime)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,noatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime)
/dev/mtdblock4 on /overlay type jffs2 (rw,noatime)
overlayfs:/overlay on / type overlay (rw,noatime,lowerdir=/,upperdir=/overlay/upper,workdir=/overlay/work)
tmpfs on /dev type tmpfs (rw,nosuid,relatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,mode=600,ptmxmode=000)
debugfs on /sys/kernel/debug type debugfs (rw,noatime)

Pictures

Retail Images
Zuzia's Images

See also