D-Link DWL-G710 rev A1

multiple revisions of this device, use caution

bg (G54)
802.11g Wireless Range Extender
Support	Support page
Wikipedia	D-Link
WikiDevi.wi-cat.ru	D-Link DWL-G710 rev A1
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Status Unknown
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	D-Link DWL-G710 A1
FCC ID	KA2DWLG710A1
Type	repeater
CPU1	Marvell Model?
Flash1 Chip	Brand? Model?
Flash1 Size	? MiB
RAM1 Size	? MiB
RAM1 Chip	Brand? Model?
ETH chip1	Marvell Model?
Ethernet Port Count	1-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: none specified
Expansion IF types	none specified
Power	5 VDC, 2 A
Connector type	barrel
Other
Default IP address: 192.168.0.30 the IP 192.168.0.30 is used by 7 additional devices of which 6 are D-Link devices Default login user: admin Default login password: blank admin:blank credentials used by 367 additional devices of which 192 are D-Link devices
Manuf/OEM/ODM	Global Sun WL AP 2454 NM0
Retail
FCC approval date	06 January 2005
Radio 1
Chip1	Marvell Model?
Chip2	Marvell 88W8000
Wireless interface OUI	none specified
Antenna Connector Type	RP-SMA
Wireless Standard	IEEE 802.11b/g
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
CPU1 brand Radio1 chip1 brand Radio1 chip2 brand D-Link DWL-G710 rev A1 Marvell Marvell Marvell D-Link DWL-G710 rev B1 Marvell Marvell Marvell

For a list of all currently documented Marvell chipsets with specifications, see Marvell.

For a list of all currently documented D-Link device with specifications, see D-Link.

• 54 Mbps - 2.4GHz 802.11g = G54 class

Overview

"WL AP 2454 NM0 B10 V1.0" and "WL AP 2454 NM0 V1.0" is silkscreened on the board in the FCC photos.

The default SSID may be default.