D-Link DWL-2700AP rev B1

multiple revisions of this device, use caution
bg (G108)
	Wireless 802.11g Outdoor Access Point and Bridge
Support	Support page
Wikipedia	D-Link
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Status Unknown
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	D-Link DWL-2700AP B1
FCC ID	KA2DWL2700APB1
IC ID	4216A-WL2700A3
Type	access point
CPU1	Brand? Model?
Flash1 Chip	Spansion Model?
Flash1 Size	? MiB
RAM1 Size	? MiB
RAM1 Chip	Winbond Model? x 2
ETH chip1	Brand? Model?
Ethernet Port Count	1-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
	802dot11 OUI: none specified;
Expansion IF types	none specified
PoE	802.3af, standard
Power	48 VDC, ? A
Connector type	Ethernet (PoE)
Other
	Default SSID: dlink (37 addl. devices); Default IP address: 192.168.0.50; the IP 192.168.0.50 is used by 62 additional devices; of which 62 are D-Link devices; Default login user: admin; Default login password: blank; admin:blank credentials used by 367 additional devices; of which 193 are D-Link devices
Manuf/OEM/ODM	Alpha Networks
Retail
FCC approval date	14 August 2006
Country of manuf	Taiwan
Radio 1
Chip1	Atheros Model?
Wireless interface OUI	none specified
Antenna Connector Type	none specified
Wireless Standard	IEEE 802.11b/g
802.11g	up to 108 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.

For a list of all currently documented D-Link device with specifications, see D-Link.

• 108 Mbps - 2.4GHz 802.11g = G108 class

Overview

"8WAPD31..1A1G" and "WAPD31 REV-A1" appears to be silkscreened on the board in the FCC photos.

This device would apppear to be using an Intel XScale processor and an Atheros single-chip Wi-Fi IC.

Default settings (including the SSID) are per the FCC manual.

The power adapter shown in the FCC photos is a Tiger Power TG-4201-48V-IV (100-240VAC ~ 50-60 Hz, 1.6A max. -> 48VDC, 0.875A)..