D-Link DIR-3040 rev A1
From TechInfoDepot
Jump to navigationJump to searchabgn+ac (AC3000) | |||||
---|---|---|---|---|---|
Smart AC3000 High Power Wi-Fi Tri Band Gigabit Mesh Router | |||||
Homepage | |||||
Wikipedia | |||||
3rd Party Firmware | |||||
dd-wrt |
Status Unknown | ||||
OpenWrt | |||||
Tomato any flavor |
Incompatible | ||||
Gargoyle |
Status Unknown | ||||
Platform | |||||
Brand • Model • Rev |
D-Link DIR-3040 rev A1 | ||||
FCC ID | |||||
Type |
wireless router | ||||
CPU1 | |||||
CPU1 Type |
MIPS 1004Kc | ||||
CPU1 Speed |
880 MHz ( 2 cores ) 16-bit | ||||
Flash1 Chip |
Winbond W29N01HVSINA | ||||
Flash1 Size |
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> | ||||
RAM1 Size |
256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> | ||||
RAM1 Chip |
Micron MT41K128M16JT-125 | ||||
ETH chip1 | |||||
Switch | |||||
Ethernet Port Count |
1-1GbE-WAN 4-1GbE-LAN | ||||
Wired Standard |
IEEE 802.3i/3u/3ab | ||||
802dot11 OUI: none specified | |||||
Expansion IF types |
USB 3.0 | ||||
USB ports |
1 | ||||
USB Hub Compatible |
Untested | ||||
Power |
12 VDC, 3 A | ||||
Connector type |
barrel | ||||
Other | |||||
| |||||
3rd Party Firmware Support | |||||
Buttons |
WPS, Reset | ||||
Radio 1 | |||||
Chip1 |
MediaTek MT7615DN | ||||
Wireless interface OUI |
none specified | ||||
Antenna Connector Type |
none specified | ||||
MIMO status |
2x2:2 | ||||
Wireless Standard |
IEEE 802.11b/g/n | ||||
N-QAM |
up to 400 Mbps | ||||
802.11n |
up to 300 Mbps | ||||
802.11g |
up to 54 Mbps | ||||
802.11b |
up to 11 Mbps | ||||
WiFi Operating Frequency |
2.4 GHz | ||||
Radio 2 | |||||
Chip1 |
MediaTek MT7615DN | ||||
Wireless interface OUI |
none specified | ||||
Antenna Connector Type |
none specified | ||||
MIMO status |
2x2:2 | ||||
Wireless Standard |
IEEE 802.11a/n/ac | ||||
802.11ac |
up to 867 Mbps | ||||
802.11n |
up to 300 Mbps | ||||
802.11a |
up to 54 Mbps | ||||
WiFi Operating Frequency |
5 GHz | ||||
Radio 3 | |||||
Chip1 | |||||
Wireless interface OUI |
none specified | ||||
Antenna Connector Type |
none specified | ||||
MIMO status |
4x4:4 | ||||
Wireless Standard |
IEEE 802.11a/n/ac | ||||
802.11ac |
up to 1733 Mbps | ||||
802.11n |
up to 600 Mbps | ||||
802.11a |
up to 54 Mbps | ||||
WiFi Operating Frequency |
5 GHz | ||||
|
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented D-Link device with specifications, see D-Link.
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
On the OpenWrt ToH (techdata entry)
OpenWrt Target: ramips
OpenWrt Subtarget: mt7621
OpenWrt Package architecture: mipsel_24kc
Support started version: ?
Current supported version: snapshot
OpenWrt Target: ramips
OpenWrt Subtarget: mt7621
OpenWrt Package architecture: mipsel_24kc
Support started version: ?
Current supported version: snapshot
Please insert instructions here
Categories:
- D-Link
- Embedded system/wireless router
- Embedded System MediaTek
- Embedded System MT7621AT
- MediaTek
- Embedded System MIPS 1004Kc
- Embedded System
- OpenWrt Supported
- Embedded System MT7615DN
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System IEEE 802.11a/n/ac
- Embedded System MT7615N
- Triple-Radio Wireless Embedded System
- Wireless Embedded System
- Tri-Band
- English Documentation