D-Link DAP-2680 rev A1
From TechInfoDepot
Jump to navigationJump to searchabgn+ac (AC1750) | |
---|---|
Wireless AC1750 Wave 2 Dual-Band PoE Access Point | |
Homepage | |
Wikipedia | |
WikiDevi.wi-cat.ru | |
3rd Party Firmware | |
dd-wrt |
Status Unknown |
OpenWrt | |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
D-Link DAP-2680 A1 |
FCC ID | |
IC ID | |
Type |
access point |
CPU1 |
Qualcomm Atheros QCA9558 |
CPU1 Type |
MIPS 74Kc |
CPU1 Speed |
720 MHz |
Flash1 Chip |
Winbond Model? |
Flash1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
RAM1 Size |
256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> |
RAM1 Chip |
Winbond W971GG6SB-25 x 2 |
ETH chip1 |
Qualcomm Atheros QCA9558 |
Ethernet Port Count |
1-1GbE-LAN |
Wired Standard |
IEEE 802.3i/3u/3ab |
802dot11 OUI: none specified | |
Expansion IF types |
none specified |
PoE |
802.3at, standard |
Power |
12 VDC, 2 A |
Connector type |
barrel |
Additional chips | |
Other | |
Default IP address: 192.168.0.50 | |
Manuf/OEM/ODM | |
3rd Party Firmware Support | |
Retail | |
FCC approval date | 27 February 2018 |
Country of manuf | China |
Radio 1 | |
Chip1 |
Qualcomm Atheros QCA9558 |
Wireless interface OUI |
none specified |
Antenna Connector Type |
U.FL |
MIMO status |
3x3:3 |
Wireless Standard |
IEEE 802.11b/g/n |
802.11n |
up to 450 Mbps |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
Radio 2 | |
Chip1 |
Qualcomm Atheros QCA9984 |
Wireless interface OUI |
none specified |
Antenna Connector Type |
U.FL |
MIMO status |
3x3:3 |
Wireless Standard |
IEEE 802.11a/n/ac |
802.11ac |
up to 1300 Mbps |
802.11n |
up to 450 Mbps |
802.11a |
up to 54 Mbps |
WiFi Operating Frequency |
5 GHz |
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.
For a list of all currently documented D-Link device with specifications, see D-Link.
Overview
Only three of the QCA9984's tx/rx chains are actually implemented so this is 3x3:3 for 5GHz.
See also: D-Link DIR-2680
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
On the OpenWrt ToH (techdata entry)
OpenWrt Target: ath79
OpenWrt Subtarget: generic
OpenWrt Package architecture: mips_24kc
Support started version: 21.02.0
Current supported version: 23.05.5
OpenWrt Target: ath79
OpenWrt Subtarget: generic
OpenWrt Package architecture: mips_24kc
Support started version: 21.02.0
Current supported version: 23.05.5
Please insert instructions here
Pictures
Categories:
- D-Link
- Embedded system/access point
- Embedded System Qualcomm Atheros
- Embedded System QCA9558
- Qualcomm Atheros
- Embedded System MIPS 74Kc
- Embedded System
- Manuf Alpha Networks
- OpenWrt Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System QCA9984
- Embedded System IEEE 802.11a/n/ac
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- English Documentation