Cisco RAN201

bgn (N150)
Wireless-N Home ADSL2+ Modem Router
Wikipedia	Cisco Systems
3rd Party Firmware
dd-wrt	Incompatible
OpenWrt	Incompatible
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	Cisco RAN201
FCC ID	LDK-RAN201
Board ID	YQN00D-1.6
Type	wireless router, dsl modem
CPU1	Ralink RT3050
CPU1 Type	MIPS 24KEc
CPU1 Speed	320 MHz 16-bit
CPU2	Infineon PSB 50600
CPU2 Speed	166 MHz
Flash1 Chip	Brand? Model?
Flash1 Size	2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br />
Flash2 Size	4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br />
RAM1 Size	8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br />
RAM1 Chip	EtronTech EM638165TS-6G
RAM2 Size	32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br />
RAM2 Chip	EtronTech EM63A165TS-6G
ETH chip1	Ralink RT3050
Switch	Ralink RT3050
Ethernet Port Count	4-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: none specified
Expansion IF types	none specified
Power	12 VDC, 1 A
Connector type	barrel
Flags: ADSL2+
Other
Default IP address: 192.168.1.1 the IP 192.168.1.1 is used by 1324 additional devices of which 18 are Cisco devices Default login user: admin Default login password: admin admin:admin credentials used by 1342 additional devices of which 13 are Cisco devices
Manuf/OEM/ODM	SerComm
Retail
FCC approval date	22 September 2010
Country of manuf	China
Radio 1
Chip1	Ralink RT3050
Wireless interface OUI	none specified
Antenna Connector Type	none
MIMO status	1x1:1
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 150 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz

For a list of all currently documented Infineon (Lantiq) chipsets with specifications, see Infineon.
For a list of all currently documented Ralink chipsets with specifications, see Ralink.

For a list of all currently documented Cisco device with specifications, see Cisco.

• 150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class

Overview

"YQN00D-1.6" and the Cisco logo is silkscreened on the board in the FCC photos.

The same SerComm text is found on the Linksys WAG120N's (FCC EUT) board.

Default settings are per the FCC manual.

• Wi-Fi Certified : WFA8759 (as of 02/24/2010)